version 1.1, 2013/05/21 08:26:56
|
version 1.1.2.3, 2013/05/21 23:48:07
|
Line 0
|
Line 1
|
|
# |
|
## ELWIX - ALFA Nx kernel hints file |
|
# |
|
# $Id$ |
|
# |
|
|
|
hint.apb.0.at="nexus0" |
|
hint.apb.0.irq=4 |
|
|
|
# uart0 |
|
hint.uart.0.at="apb0" |
|
# see atheros/uart_cpu_ar71xx.c why +3 |
|
hint.uart.0.maddr=0x18020003 |
|
hint.uart.0.msize=0x18 |
|
hint.uart.0.irq=3 |
|
|
|
#ohci |
|
hint.ohci.0.at="apb0" |
|
hint.ohci.0.maddr=0x1c000000 |
|
hint.ohci.0.msize=0x01000000 |
|
hint.ohci.0.irq=6 |
|
|
|
#ehci |
|
hint.ehci.0.at="nexus0" |
|
hint.ehci.0.maddr=0x1b000100 |
|
hint.ehci.0.msize=0x01000000 |
|
hint.ehci.0.irq=1 |
|
|
|
# pci |
|
hint.pcib.0.at="nexus0" |
|
hint.pcib.0.irq=0 |
|
|
|
# ath0 hint - pcie slot 0 |
|
hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000 |
|
hint.pcib.0.bus.0.0.0.ath_fixup_size=4096 |
|
|
|
# ath |
|
hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware" |
|
# Where the ART is |
|
hint.ath.0.eepromaddr=0x1fff1000 |
|
|
|
# arge0 MDIO bus |
|
hint.argemdio.0.at="nexus0" |
|
hint.argemdio.0.maddr=0x19000000 |
|
hint.argemdio.0.msize=0x1000 |
|
hint.argemdio.0.order=0 |
|
|
|
# arge0: MII; dedicated PHY 4 on switch, connected via internal switch |
|
# MDIO bus. |
|
|
|
# hint.arge.0.eeprommac=0x83fe9ff0 |
|
hint.arge.0.phymask=0x10 # PHY 4 |
|
# hint.arge.0.miimode=2 # MII |
|
hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus |
|
|
|
# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII. |
|
hint.arge.1.phymask=0x0 |
|
hint.arge.1.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus |
|
# hint.arge.1.miimode=1 # GMII |
|
#hint.arge.1.media=1000 # Force to 1000BaseTX/full |
|
#hint.arge.1.fduplex=1 |
|
|
|
# |
|
# AR7240 switch config |
|
# |
|
hint.arswitch.0.at="mdio0" |
|
hint.arswitch.0.is_7240=1 # We need to be explicitly told this |
|
hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3) |
|
hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY |
|
hint.arswitch.0.is_rgmii=1 # No, not RGMII |
|
hint.arswitch.0.is_gmii=0 # No, not GMII |
|
|
|
## arge0 |
|
hint.arge.0.at="nexus0" |
|
hint.arge.0.maddr=0x19000000 |
|
hint.arge.0.msize=0x1000 |
|
hint.arge.0.irq=2 |
|
|
|
|
|
hint.arge.1.at="nexus0" |
|
hint.arge.1.maddr=0x1a000000 |
|
hint.arge.1.msize=0x1000 |
|
hint.arge.1.irq=3 |
|
|
|
# GPIO |
|
hint.gpio.0.at="apb0" |
|
hint.gpio.0.maddr=0x18040000 |
|
hint.gpio.0.msize=0x1000 |
|
hint.gpio.0.irq=2 |
|
|
|
# Signal leds |
|
hint.gpioled.0.at="gpiobus0" |
|
hint.gpioled.0.name="but0" |
|
hint.gpioled.0.pins=0x00800 # pin 11 |
|
hint.gpioled.1.at="gpiobus0" |
|
hint.gpioled.1.name="sig2" |
|
hint.gpioled.1.pins=0x20000 # pin 17 |
|
hint.gpioled.2.at="gpiobus0" |
|
hint.gpioled.2.name="sig3" |
|
hint.gpioled.2.pins=0x10000 # pin 16 |
|
hint.gpioled.4.at="gpiobus0" |
|
hint.gpioled.4.name="sig5" |
|
hint.gpioled.4.pins=0x01000 # pin 12 |
|
hint.gpioled.5.at="gpiobus0" |
|
hint.gpioled.5.name="sig6" |
|
hint.gpioled.5.pins=0x00100 # pin 8 |
|
hint.gpioled.6.at="gpiobus0" |
|
hint.gpioled.6.name="sig7" |
|
hint.gpioled.6.pins=0x00040 # pin 6 |
|
hint.gpioled.7.at="gpiobus0" |
|
hint.gpioled.7.name="sig8" |
|
hint.gpioled.7.pins=0x00080 # pin 7 |
|
|
|
# SPI controller/bus |
|
hint.spi.0.at="nexus0" |
|
hint.spi.0.maddr=0x1f000000 |
|
hint.spi.0.msize=0x10 |
|
|
|
# SPI flash |
|
hint.mx25l.0.at="spibus0" |
|
hint.mx25l.0.cs=0 |
|
|
|
# Watchdog |
|
hint.ar71xx_wdog.0.at="nexus0" |
|
|
|
# nvram mapping - XXX ? |
|
hint.nvram.0.base=0x1f030000 |
|
hint.nvram.0.maxsize=0x2000 |
|
hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic |
|
hint.nvram.1.base=0x1f032000 |
|
hint.nvram.1.maxsize=0x4000 |
|
hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic |
|
|
|
# hwpmc device |
|
hint.ar71xx_pmc.0.at="apb0" |
|
hint.ar71xx_pmc.0.irq=5 |
|
|
|
# GEOM_MAP |
|
# |
|
# From my PB92 environment: |
|
# |
|
# mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART) |
|
|
|
hint.map.0.at="flash/spi0" |
|
hint.map.0.start=0x00000000 |
|
hint.map.0.end=0x00040000 # 256k u-boot |
|
hint.map.0.name="u-boot" |
|
hint.map.0.readonly=1 |
|
|
|
hint.map.1.at="flash/spi0" |
|
hint.map.1.start=0x00040000 |
|
hint.map.1.end=0x00050000 # 64k u-boot-env |
|
hint.map.1.name="u-boot-env" |
|
hint.map.1.readonly=0 |
|
|
|
hint.map.2.at="flash/spi0" |
|
hint.map.2.start=0x00050000 |
|
hint.map.2.end=0x00650000 # 6144k rootfs |
|
hint.map.2.name="rootfs" |
|
hint.map.2.readonly=0 |
|
|
|
hint.map.3.at="flash/spi0" |
|
hint.map.3.start=0x00650000 |
|
hint.map.3.end=0x007e0000 # 1600k uImage |
|
hint.map.3.name="uImage" |
|
hint.map.3.readonly=0 |
|
|
|
hint.map.4.at="flash/spi0" |
|
hint.map.4.start=0x007e0000 |
|
hint.map.4.end=0x007f0000 # 64k NVRAM |
|
hint.map.4.name="NVRAM" |
|
hint.map.4.readonly=0 |
|
|
|
hint.map.5.at="flash/spi0" |
|
hint.map.5.start=0x007f0000 |
|
hint.map.5.end=0x00800000 # 64k ART |
|
hint.map.5.name="ART" |
|
hint.map.5.readonly=0 |
|
|
|
hint.map.6.at="flash/spi0" |
|
hint.map.6.start=0x00050000 |
|
hint.map.6.end=0x007e0000 # 7744k firmware |
|
hint.map.6.name="firmware" |
|
hint.map.6.readonly=1 |