[BACK]Return to ALFA_NX.hints CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config

Diff for /elwix/config/Attic/ALFA_NX.hints between versions 1.1 and 1.1.2.1

version 1.1, 2013/05/21 08:26:56 version 1.1.2.1, 2013/05/21 08:26:57
Line 0 Line 1
   # $FreeBSD: src/sys/mips/conf/PB92.hints,v 1.4 2012/11/17 01:52:48 svnexp Exp $
   hint.apb.0.at="nexus0"
   hint.apb.0.irq=4
   
   # uart0
   hint.uart.0.at="apb0"
   # see atheros/uart_cpu_ar71xx.c why +3
   hint.uart.0.maddr=0x18020003
   hint.uart.0.msize=0x18
   hint.uart.0.irq=3
   
   #ehci - note the 0x100 offset for the AR913x/AR724x
   hint.ehci.0.at="nexus0"
   hint.ehci.0.maddr=0x1b000100
   hint.ehci.0.msize=0x00ffff00
   hint.ehci.0.irq=1
   
   # pci
   hint.pcib.0.at="nexus0"
   hint.pcib.0.irq=0
   
   # arge0 MDIO bus
   hint.argemdio.0.at="nexus0"
   hint.argemdio.0.maddr=0x19000000
   hint.argemdio.0.msize=0x1000
   hint.argemdio.0.order=0
   
   # arge0: MII; dedicated PHY 4 on switch, connected via internal switch
   # MDIO bus.
   
   # hint.arge.0.eeprommac=0x83fe9ff0
   hint.arge.0.phymask=0x10        # PHY 4
   # hint.arge.0.miimode=2         # MII
   hint.arge.0.mdio=mdioproxy1     # Hanging off the arswitch MDIO bus
   
   # arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
   hint.arge.1.phymask=0x0
   # hint.arge.1.miimode=1         # GMII
   #hint.arge.1.media=1000         # Force to 1000BaseTX/full
   #hint.arge.1.fduplex=1
   
   #
   # AR7240 switch config
   #
   hint.arswitch.0.at="mdio0"
   hint.arswitch.0.is_7240=1       # We need to be explicitly told this
   hint.arswitch.0.numphys=4       # 4 active switch PHYs (PHY 0 -> 3)
   hint.arswitch.0.phy4cpu=1       # Yes, PHY 4 == dedicated PHY
   hint.arswitch.0.is_rgmii=0      # No, not RGMII
   hint.arswitch.0.is_gmii=0       # No, not GMII
   
   ## arge0
   #hint.arge.0.at="nexus0"
   #hint.arge.0.maddr=0x19000000
   #hint.arge.0.msize=0x1000
   #hint.arge.0.irq=2
   #
   ## AR8316 workaround for now
   #hint.arge.0.media=1000
   #hint.arge.0.fduplex=1
   #hint.arge.0.phymask=0x3
   
   # GPIO
   hint.gpio.0.at="apb0"
   hint.gpio.0.maddr=0x18040000
   hint.gpio.0.msize=0x1000
   hint.gpio.0.irq=2
   
   # Signal leds
   hint.gpioled.0.at="gpiobus0"
   hint.gpioled.0.name="sig1"
   hint.gpioled.0.pins=0x0001      # pin 0
   hint.gpioled.1.at="gpiobus0"
   hint.gpioled.1.name="sig2"
   hint.gpioled.1.pins=0x0002      # pin 1
   hint.gpioled.2.at="gpiobus0"
   hint.gpioled.2.name="sig3"
   hint.gpioled.2.pins=0x0800      # pin 11
   hint.gpioled.3.at="gpiobus0"
   hint.gpioled.3.name="sig4"
   hint.gpioled.3.pins=0x0080      # pin 7
   
   # SPI controller/bus
   hint.spi.0.at="nexus0"
   hint.spi.0.maddr=0x1f000000
   hint.spi.0.msize=0x10
   
   # SPI flash
   hint.mx25l.0.at="spibus0"
   hint.mx25l.0.cs=0
   
   # Watchdog
   hint.ar71xx_wdog.0.at="nexus0"
   
   # nvram mapping - XXX ?
   hint.nvram.0.base=0x1f030000
   hint.nvram.0.maxsize=0x2000
   hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
   hint.nvram.1.base=0x1f032000
   hint.nvram.1.maxsize=0x4000
   hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
   
   # GEOM_MAP
   #
   # From my PB92 environment:
   #
   # mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART)
   
   hint.map.0.at="flash/spi0"
   hint.map.0.start=0x00000000
   hint.map.0.end=0x00040000       # 256k u-boot
   hint.map.0.name="u-boot"
   hint.map.0.readonly=1
   
   hint.map.1.at="flash/spi0"
   hint.map.1.start=0x00040000
   hint.map.1.end=0x00050000       # 64k u-boot-env
   hint.map.1.name="u-boot-env"
   hint.map.1.readonly=0
   
   hint.map.2.at="flash/spi0"
   hint.map.2.start=0x00050000
   hint.map.2.end=0x00650000       # 6144k rootfs
   hint.map.2.name="rootfs"
   hint.map.2.readonly=0
   
   hint.map.3.at="flash/spi0"
   hint.map.3.start=0x00650000
   hint.map.3.end=0x007e0000       # 1600k uImage
   hint.map.3.name="uImage"
   hint.map.3.readonly=0
   
   hint.map.4.at="flash/spi0"
   hint.map.4.start=0x007e0000
   hint.map.4.end=0x007f0000       # 64k NVRAM
   hint.map.4.name="NVRAM"
   hint.map.4.readonly=0
   
   hint.map.5.at="flash/spi0"
   hint.map.5.start=0x007f0000
   hint.map.5.end=0x00800000       # 64k ART
   hint.map.5.name="ART"
   hint.map.5.readonly=0
   
   hint.map.6.at="flash/spi0"
   hint.map.6.start=0x00050000
   hint.map.6.end=0x007e0000       # 7744k firmware
   hint.map.6.name="firmware"
   hint.map.6.readonly=1
Removed from v.1.1  
changed lines
  Added in v.1.1.2.1

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>