version 1.1.2.2, 2013/05/21 17:05:36
|
version 1.1.2.3, 2013/05/21 23:48:07
|
Line 30 hint.ehci.0.irq=1
|
Line 30 hint.ehci.0.irq=1
|
hint.pcib.0.at="nexus0" |
hint.pcib.0.at="nexus0" |
hint.pcib.0.irq=0 |
hint.pcib.0.irq=0 |
|
|
|
# ath0 hint - pcie slot 0 |
|
hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000 |
|
hint.pcib.0.bus.0.0.0.ath_fixup_size=4096 |
|
|
|
# ath |
|
hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware" |
|
# Where the ART is |
|
hint.ath.0.eepromaddr=0x1fff1000 |
|
|
# arge0 MDIO bus |
# arge0 MDIO bus |
hint.argemdio.0.at="nexus0" |
hint.argemdio.0.at="nexus0" |
hint.argemdio.0.maddr=0x19000000 |
hint.argemdio.0.maddr=0x19000000 |
Line 46 hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch
|
Line 55 hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch
|
|
|
# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII. |
# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII. |
hint.arge.1.phymask=0x0 |
hint.arge.1.phymask=0x0 |
|
hint.arge.1.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus |
# hint.arge.1.miimode=1 # GMII |
# hint.arge.1.miimode=1 # GMII |
#hint.arge.1.media=1000 # Force to 1000BaseTX/full |
#hint.arge.1.media=1000 # Force to 1000BaseTX/full |
#hint.arge.1.fduplex=1 |
#hint.arge.1.fduplex=1 |
Line 57 hint.arswitch.0.at="mdio0"
|
Line 67 hint.arswitch.0.at="mdio0"
|
hint.arswitch.0.is_7240=1 # We need to be explicitly told this |
hint.arswitch.0.is_7240=1 # We need to be explicitly told this |
hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3) |
hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3) |
hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY |
hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY |
hint.arswitch.0.is_rgmii=0 # No, not RGMII | hint.arswitch.0.is_rgmii=1 # No, not RGMII |
hint.arswitch.0.is_gmii=0 # No, not GMII |
hint.arswitch.0.is_gmii=0 # No, not GMII |
|
|
## arge0 |
## arge0 |
Line 80 hint.gpio.0.irq=2
|
Line 90 hint.gpio.0.irq=2
|
|
|
# Signal leds |
# Signal leds |
hint.gpioled.0.at="gpiobus0" |
hint.gpioled.0.at="gpiobus0" |
hint.gpioled.0.name="sig1" | hint.gpioled.0.name="but0" |
hint.gpioled.0.pins=0x0001 # pin 0 | hint.gpioled.0.pins=0x00800 # pin 11 |
hint.gpioled.1.at="gpiobus0" |
hint.gpioled.1.at="gpiobus0" |
hint.gpioled.1.name="sig2" |
hint.gpioled.1.name="sig2" |
hint.gpioled.1.pins=0x0002 # pin 1 | hint.gpioled.1.pins=0x20000 # pin 17 |
hint.gpioled.2.at="gpiobus0" |
hint.gpioled.2.at="gpiobus0" |
hint.gpioled.2.name="sig3" |
hint.gpioled.2.name="sig3" |
hint.gpioled.2.pins=0x0800 # pin 11 | hint.gpioled.2.pins=0x10000 # pin 16 |
hint.gpioled.3.at="gpiobus0" | hint.gpioled.4.at="gpiobus0" |
hint.gpioled.3.name="sig4" | hint.gpioled.4.name="sig5" |
hint.gpioled.3.pins=0x0080 # pin 7 | hint.gpioled.4.pins=0x01000 # pin 12 |
| hint.gpioled.5.at="gpiobus0" |
| hint.gpioled.5.name="sig6" |
| hint.gpioled.5.pins=0x00100 # pin 8 |
| hint.gpioled.6.at="gpiobus0" |
| hint.gpioled.6.name="sig7" |
| hint.gpioled.6.pins=0x00040 # pin 6 |
| hint.gpioled.7.at="gpiobus0" |
| hint.gpioled.7.name="sig8" |
| hint.gpioled.7.pins=0x00080 # pin 7 |
|
|
# SPI controller/bus |
# SPI controller/bus |
hint.spi.0.at="nexus0" |
hint.spi.0.at="nexus0" |