Annotation of elwix/config/PB92.hints, revision 1.1.2.1
1.1.2.1 ! misho 1: # $FreeBSD: src/sys/mips/conf/PB92.hints,v 1.4 2012/11/17 01:52:48 svnexp Exp $
! 2: hint.apb.0.at="nexus0"
! 3: hint.apb.0.irq=4
! 4:
! 5: # uart0
! 6: hint.uart.0.at="apb0"
! 7: # see atheros/uart_cpu_ar71xx.c why +3
! 8: hint.uart.0.maddr=0x18020003
! 9: hint.uart.0.msize=0x18
! 10: hint.uart.0.irq=3
! 11:
! 12: #ehci - note the 0x100 offset for the AR913x/AR724x
! 13: hint.ehci.0.at="nexus0"
! 14: hint.ehci.0.maddr=0x1b000100
! 15: hint.ehci.0.msize=0x00ffff00
! 16: hint.ehci.0.irq=1
! 17:
! 18: # pci
! 19: hint.pcib.0.at="nexus0"
! 20: hint.pcib.0.irq=0
! 21:
! 22: # arge0
! 23: hint.arge.0.at="nexus0"
! 24: hint.arge.0.maddr=0x19000000
! 25: hint.arge.0.msize=0x1000
! 26: hint.arge.0.irq=2
! 27:
! 28: # AR8316 workaround for now
! 29: hint.arge.0.media=1000
! 30: hint.arge.0.fduplex=1
! 31: hint.arge.0.phymask=0x3
! 32:
! 33: # GPIO
! 34: hint.gpio.0.at="apb0"
! 35: hint.gpio.0.maddr=0x18040000
! 36: hint.gpio.0.msize=0x1000
! 37: hint.gpio.0.irq=2
! 38:
! 39: # Signal leds
! 40: hint.gpioled.0.at="gpiobus0"
! 41: hint.gpioled.0.name="sig1"
! 42: hint.gpioled.0.pins=0x0001 # pin 0
! 43: hint.gpioled.1.at="gpiobus0"
! 44: hint.gpioled.1.name="sig2"
! 45: hint.gpioled.1.pins=0x0002 # pin 1
! 46: hint.gpioled.2.at="gpiobus0"
! 47: hint.gpioled.2.name="sig3"
! 48: hint.gpioled.2.pins=0x0800 # pin 11
! 49: hint.gpioled.3.at="gpiobus0"
! 50: hint.gpioled.3.name="sig4"
! 51: hint.gpioled.3.pins=0x0080 # pin 7
! 52:
! 53: # SPI controller/bus
! 54: hint.spi.0.at="nexus0"
! 55: hint.spi.0.maddr=0x1f000000
! 56: hint.spi.0.msize=0x10
! 57:
! 58: # SPI flash
! 59: hint.mx25l.0.at="spibus0"
! 60: hint.mx25l.0.cs=0
! 61:
! 62: # Watchdog
! 63: hint.ar71xx_wdog.0.at="nexus0"
! 64:
! 65: # nvram mapping - XXX ?
! 66: hint.nvram.0.base=0x1f030000
! 67: hint.nvram.0.maxsize=0x2000
! 68: hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
! 69: hint.nvram.1.base=0x1f032000
! 70: hint.nvram.1.maxsize=0x4000
! 71: hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
! 72:
! 73: # GEOM_MAP
! 74: #
! 75: # From my PB92 environment:
! 76: #
! 77: # mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART)
! 78:
! 79: hint.map.0.at="flash/spi0"
! 80: hint.map.0.start=0x00000000
! 81: hint.map.0.end=0x00040000 # 256k u-boot
! 82: hint.map.0.name="u-boot"
! 83: hint.map.0.readonly=1
! 84:
! 85: hint.map.1.at="flash/spi0"
! 86: hint.map.1.start=0x00040000
! 87: hint.map.1.end=0x00050000 # 64k u-boot-env
! 88: hint.map.1.name="u-boot-env"
! 89: hint.map.1.readonly=0
! 90:
! 91: hint.map.2.at="flash/spi0"
! 92: hint.map.2.start=0x00050000
! 93: hint.map.2.end=0x00300000 # 2752k rootfs
! 94: hint.map.2.name="rootfs"
! 95: hint.map.2.readonly=1
! 96:
! 97: hint.map.3.at="flash/spi0"
! 98: hint.map.3.start=0x00300000
! 99: hint.map.3.end=0x003e0000 # 896k uImage
! 100: hint.map.3.name="uImage"
! 101: hint.map.3.readonly=0
! 102:
! 103: hint.map.4.at="flash/spi0"
! 104: hint.map.4.start=0x003e0000
! 105: hint.map.4.end=0x003f0000 # 64k NVRAM
! 106: hint.map.4.name="NVRAM"
! 107: hint.map.4.readonly=0
! 108:
! 109: hint.map.5.at="flash/spi0"
! 110: hint.map.5.start=0x003f0000
! 111: hint.map.5.end=0x00400000 # 64k ART
! 112: hint.map.5.name="ART"
! 113: hint.map.5.readonly=1
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>