--- elwix/config/ELWIX_ALFA_N2	2014/01/15 12:11:05	1.1.2.6
+++ elwix/config/ELWIX_ALFA_N2	2014/01/17 11:23:12	1.1.2.9
@@ -10,13 +10,13 @@ ident		ELWIX_ALFA_N2
 # XXX The default load address in the Uboot environment is 0x80010000
 makeoptions	KERNLOADADDR=0x80050000
 options		HZ=1000
-options		HWPMC_HOOKS
+#options		HWPMC_HOOKS
 
 # The PB92 has 32mb of RAM; hard-code that
 options		AR71XX_REALMEM=32*1024*1024
 
 # It's UBOOT, not Redboot - without this, things will hang at startup
-#options	AR71XX_ENV_UBOOT
+options		AR71XX_ENV_UBOOT
 #options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
 #options 	ATH_EEPROM_FIRMWARE	# Use EEPROM from flash
 #device		firmware		# Used by the above
@@ -30,13 +30,12 @@ include		"../atheros/std.ar71xx"
 makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
 #makeoptions	MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci hwpmc cam zlib"
 
-options		DDB
+#options		DDB
 #options		KDB
 
 options		SCHED_4BSD		#4BSD scheduler
 options		INET			#InterNETworking
 options		INET6
-# options		NFSCL			#Network Filesystem Client
 options		PSEUDOFS		#Pseudo-filesystem framework
 options		_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
 options		ALQ
@@ -55,8 +54,7 @@ options         FFS                     #Berkeley Fast
 # Support uncompress lzma rootfs
 device		geom_uncompress
 options		GEOM_UNCOMPRESS
-#options		ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
-options		ROOTDEVNAME=\"ufs:/dev/md0.uzip\"
+options		ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
 
 # PCI bus
 device		pci
@@ -65,8 +63,6 @@ device		ar724x_pci
 # NVRAM U-Boot Environment -> Kernel environment
 device		nvram2env
 
-options 	MD_ROOT			# MD is a potential root device
-
 #options 	NFSD			# New Network Filesystem Server
 #options 	NFSCLIENT		#Network File System client
 #options 	NFSSERVER		#Network File System server
@@ -79,7 +75,7 @@ options 	MD_ROOT			# MD is a potential root device
 #options 	BOOTP_COMPAT		# Workaround for broken bootp daemons.
 #options 	BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
 
-options 	GEOM_LABEL		# Provides labelization
+#options 	GEOM_LABEL		# Provides labelization
 options 	GEOM_UZIP
 device		geom_uzip	# compressed in-memory filesystem support
 
@@ -114,8 +110,8 @@ options		AH_DEBUG_ALQ
 
 #option		AH_SUPPORT_AR9130	# Makes other chipsets not function!
 device		ath_rate_sample
-option		AH_RXCFG_SDMAMW_4BYTES
-option		AH_AR5416_INTERRUPT_MITIGATION
+options		AH_RXCFG_SDMAMW_4BYTES
+options		AH_AR5416_INTERRUPT_MITIGATION
 # There's no DFS radar detection support yet so this won't actually
 # detect radars.  It however does enable the rest of the channel change
 # machinery so DFS can be debugged.
@@ -161,8 +157,10 @@ device		ar71xx_wdog
 
 # Serial
 device		uart
-#device		uart_ar71xx
+device		uart_ar71xx
 
+device		pty
+
 # Network twiddling
 device		loop
 device		ether
@@ -172,3 +170,9 @@ device		random
 device		if_bridge
 device		gif		# ip[46] in ip[46] tunneling protocol
 device		gre		# generic encapsulation - only for IPv4 in IPv4 though atm
+
+#options		MSGBUF_SIZE=65536
+#options		SHMALL=128
+#options		NSFBUFS=1024
+#options		MAXFILES=512
+#options		MAXUSERS=3