|
version 1.1.2.1, 2014/01/14 17:57:04
|
version 1.3, 2017/02/13 16:52:46
|
|
Line 1
|
Line 1
|
| # |
# |
| # AR724X -- Kernel configuration file for FreeBSD/MIPS for Atheros 724x systems | # PB92 -- Kernel configuration file for FreeBSD/mips for Atheros PB92 reference |
| | # board (AR7242) |
| # |
# |
| # This includes all the common drivers for the AR724x boards. | # $FreeBSD: head/sys/mips/conf/PB92 263301 2014-03-18 14:41:18Z imp $ |
| # Since the AR724x boards tend to have minimal flash (sometimes 4MB!), | |
| # the majority of the kernel framework will be built as modules. | |
| # |
# |
| # $FreeBSD: src/sys/mips/conf/AR724X_BASE,v 1.7 2012/11/17 05:10:20 svnexp Exp $ |
|
| # |
|
| |
|
| machine mips mips |
machine mips mips |
| ident ELWIX_ALFA_NX | ident ELWIX_ALFA_N2 |
| cpu CPU_MIPS4KC | # XXX The default load address in the Uboot environment is 0x80010000 |
| makeoptions KERNLOADADDR=0x80002000 | makeoptions KERNLOADADDR=0x80050000 |
| | options DEVICE_POLLING |
| options HZ=1000 |
options HZ=1000 |
| options HWPMC_HOOKS |
options HWPMC_HOOKS |
| |
device hwpmc |
| |
device hwpmc_mips24k |
| |
|
| device nvram2env | # The PB92 has 32mb of RAM; hard-code that |
| | options AR71XX_REALMEM=32*1024*1024 |
| |
|
| |
# It's UBOOT, not Redboot - without this, things will hang at startup |
| options AR71XX_ENV_UBOOT |
options AR71XX_ENV_UBOOT |
| options AR71XX_ENV_REDBOOT |
|
| options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash |
options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash |
| options ATH_EEPROM_FIRMWARE # Use EEPROM from flash |
options ATH_EEPROM_FIRMWARE # Use EEPROM from flash |
| device firmware # Used by the above |
device firmware # Used by the above |
|
Line 26 device firmware # Used by the above
|
Line 27 device firmware # Used by the above
|
| device etherswitch |
device etherswitch |
| device arswitch |
device arswitch |
| |
|
| files "../atheros/files.ar71xx" | hints "ELWIX_ALFA_N2.hints" |
| | include "../atheros/std.ar71xx" |
| |
|
| # For now, hints are per-board. |
|
| |
|
| hints "ALFA_NX.hints" |
|
| |
|
| makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols |
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols |
| |
|
| # Build these as modules so small platform builds will have the |
|
| # modules already built. |
|
| #makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci hwpmc cam zlib" |
#makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci hwpmc cam zlib" |
| |
|
| options DDB | #options DDB |
| #options KDB |
#options KDB |
| |
|
| options SCHED_4BSD #4BSD scheduler | options PREEMPTION # Enable kernel thread preemption |
| | options SCHED_ULE # ULE scheduler |
| | #options SCHED_4BSD #4BSD scheduler |
| options INET #InterNETworking |
options INET #InterNETworking |
| options INET6 # IPv6 | options INET6 |
| options NFSCL #Network Filesystem Client | |
| options PSEUDOFS #Pseudo-filesystem framework |
options PSEUDOFS #Pseudo-filesystem framework |
| options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions |
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions |
| |
options ALQ |
| |
|
| #options NFS_LEGACYRPC |
|
| # Debugging for use in -current |
# Debugging for use in -current |
| |
#options DEADLKRES |
| #options INVARIANTS |
#options INVARIANTS |
| #options INVARIANT_SUPPORT |
#options INVARIANT_SUPPORT |
| #options WITNESS |
#options WITNESS |
| #options WITNESS_SKIPSPIN |
#options WITNESS_SKIPSPIN |
| #options DEBUG_REDZONE |
|
| #options DEBUG_MEMGUARD |
|
| |
|
| # Don't include the SCSI/CAM strings in the default build |
# Don't include the SCSI/CAM strings in the default build |
| #options SCSI_NO_SENSE_STRINGS | options SCSI_NO_SENSE_STRINGS |
| #options SCSI_NO_OP_STRINGS | options SCSI_NO_OP_STRINGS |
| |
|
| # .. And no sysctl strings |
|
| #options NO_SYSCTL_DESCR |
|
| |
|
| options FFS #Berkeley Fast Filesystem |
options FFS #Berkeley Fast Filesystem |
| options NO_FFS_SNAPSHOT |
options NO_FFS_SNAPSHOT |
| # options SOFTUPDATES #Enable FFS soft updates support | #options SOFTUPDATES #Enable FFS soft updates support |
| # options UFS_ACL #Support for access control lists | #options UFS_ACL #Support for access control lists |
| # options UFS_DIRHASH #Improve performance on big directories | #options UFS_DIRHASH #Improve performance on big directories |
| # options MSDOSFS # Read MSDOS filesystems; useful for USB/CF | |
| |
|
| |
# Support uncompress lzma rootfs |
| |
device geom_uncompress |
| |
options GEOM_UNCOMPRESS |
| |
options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\" |
| |
|
| |
# PCI bus |
| device pci |
device pci |
| device ar724x_pci |
device ar724x_pci |
| |
|
| options MD_ROOT # MD is a potential root device | # NVRAM U-Boot Environment -> Kernel environment |
| options MD_ROOT_SIZE=5120 | device nvram2env |
| |
|
| |
options NFSCL # New Network Filesystem Client |
| #options NFSD # New Network Filesystem Server |
#options NFSD # New Network Filesystem Server |
| options NFSCLIENT #Network File System client |
options NFSCLIENT #Network File System client |
| #options NFSSERVER #Network File System server |
#options NFSSERVER #Network File System server |
| #options NFSLOCKD # Network Lock Manager | options NFSLOCKD # Network Lock Manager |
| #options NFS_ROOT # NFS usable as /, requires NFSCL | options NFS_ROOT # NFS usable as /, requires NFSCL |
| #options BOOTP # Use BOOTP to obtain IP address/hostname |
#options BOOTP # Use BOOTP to obtain IP address/hostname |
| # Requires NFSCLIENT and NFS_ROOT |
# Requires NFSCLIENT and NFS_ROOT |
| #options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info |
#options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info |
| #options BOOTP_NFSV3 # Use NFS v3 to NFS mount root |
#options BOOTP_NFSV3 # Use NFS v3 to NFS mount root |
| #options BOOTP_COMPAT # Workaround for broken bootp daemons. |
#options BOOTP_COMPAT # Workaround for broken bootp daemons. |
| #options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP |
#options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP |
| options ROOTDEVNAME=\"ufs:/dev/md0.uzip\" |
|
| |
|
| options GEOM_LABEL # Provides labelization |
options GEOM_LABEL # Provides labelization |
| options GEOM_UZIP |
options GEOM_UZIP |
| options GEOM_UNCOMPRESS | device geom_uzip # compressed in-memory filesystem support |
| device geom_redboot | |
| device geom_map # to get access to the SPI flash partitions | |
| device geom_uncompress # compressed in-memory filesystem hackery! | |
| device geom_uzip # compressed in-memory filesystem support | |
| |
|
| # 802.11 framework | # Wireless NIC cards |
| options IEEE80211_DEBUG | #options IEEE80211_DEBUG |
| options IEEE80211_ALQ | |
| options IEEE80211_SUPPORT_MESH |
options IEEE80211_SUPPORT_MESH |
| options IEEE80211_SUPPORT_SUPERG |
options IEEE80211_SUPPORT_SUPERG |
| options IEEE80211_SUPPORT_TDMA |
|
| options IEEE80211_AMPDU_AGE |
options IEEE80211_AMPDU_AGE |
| |
options IEEE80211_SUPPORT_TDMA |
| |
options IEEE80211_ALQ |
| device wlan # 802.11 support |
device wlan # 802.11 support |
| device wlan_wep # 802.11 WEP support |
device wlan_wep # 802.11 WEP support |
| device wlan_ccmp # 802.11 CCMP support |
device wlan_ccmp # 802.11 CCMP support |
|
Line 118 device wlan_rssadapt
|
Line 111 device wlan_rssadapt
|
| device ath # Atheros interface support |
device ath # Atheros interface support |
| device ath_pci # Atheros PCI/Cardbus bus |
device ath_pci # Atheros PCI/Cardbus bus |
| device ath_ahb |
device ath_ahb |
| options ATH_DEBUG | #options ATH_DEBUG |
| options ATH_DIAGAPI | |
| options ATH_ENABLE_11N |
options ATH_ENABLE_11N |
| |
options ATH_DIAGAPI |
| |
|
| |
device ath_hal |
| |
options AH_SUPPORT_AR5416 |
| options AH_DEBUG |
options AH_DEBUG |
| options AH_DEBUG_ALQ |
options AH_DEBUG_ALQ |
| options ALQ | |
| device ath_hal | |
| option AH_SUPPORT_AR5416 | |
| #option AH_SUPPORT_AR9130 # Makes other chipsets not function! |
#option AH_SUPPORT_AR9130 # Makes other chipsets not function! |
| device ath_rate_sample |
device ath_rate_sample |
| option AH_RXCFG_SDMAMW_4BYTES | options AH_RXCFG_SDMAMW_4BYTES |
| option AH_AR5416_INTERRUPT_MITIGATION | options AH_AR5416_INTERRUPT_MITIGATION |
| # There's no DFS radar detection support yet so this won't actually |
# There's no DFS radar detection support yet so this won't actually |
| # detect radars. It however does enable the rest of the channel change |
# detect radars. It however does enable the rest of the channel change |
| # machinery so DFS can be debugged. |
# machinery so DFS can be debugged. |
| #option ATH_ENABLE_DFS | option ATH_ENABLE_DFS |
| |
|
| device mii |
device mii |
| device arge |
device arge |
| options ARGE_DEBUG # Enable if_arge debugging for now | ##options ARGE_DEBUG # Enable if_arge debugging for now |
| options ARGE_MDIO # Export an MDIO bus separate from arge |
options ARGE_MDIO # Export an MDIO bus separate from arge |
| device miiproxy # MDIO bus <-> MII PHY rendezvous |
device miiproxy # MDIO bus <-> MII PHY rendezvous |
| |
|
| |
# USB devices - PB92 has EHCI only |
| |
|
| #device usb |
#device usb |
| options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order |
options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order |
| #options USB_DEBUG |
#options USB_DEBUG |
| options USB_HOST_ALIGN=32 # AR724X (MIPS in general?) requires this | options USB_HOST_ALIGN=32 |
| #device ehci |
#device ehci |
| #device ohci # OHCI PCI->USB interface |
|
| |
|
| |
# Mass storage |
| |
#device scbus |
| #device umass |
#device umass |
| |
#device da |
| |
|
| device scbus | # Read MSDOS formatted disks |
| device da | options GEOM_PART_BSD |
| | options GEOM_PART_MBR |
| |
|
| # On-board SPI flash | options NULLFS |
| | options UNIONFS |
| | #options TMPFS |
| | #options MSDOSFS |
| | |
| | # GPIO Bus |
| | device gpio |
| | device gpioled |
| | device gpioiic |
| | |
| | device iicbb |
| | device iicbus |
| | device iic |
| | |
| | # SPI and flash |
| device spibus |
device spibus |
| device ar71xx_spi |
device ar71xx_spi |
| device mx25l |
device mx25l |
| |
|
| |
# The flash is statically partitioned; add in that |
| |
device geom_map |
| |
|
| device ar71xx_wdog |
device ar71xx_wdog |
| |
|
| |
# Serial |
| device uart |
device uart |
| device uart_ar71xx |
device uart_ar71xx |
| |
|
| |
# Network twiddling |
| device loop |
device loop |
| device ether |
device ether |
| |
device vlan |
| device md |
device md |
| device bpf |
device bpf |
| device random |
device random |
| device if_bridge |
device if_bridge |
| device gif # ip[46] in ip[46] tunneling protocol |
device gif # ip[46] in ip[46] tunneling protocol |
| #device gre # generic encapsulation - only for IPv4 in IPv4 though atm | device gre # generic encapsulation - only for IPv4 in IPv4 though atm |
| | device tun |
| | device tap |
| |
|
| # Enable GPIO | device pf |
| device gpio | device pflog |
| device gpioled | device pfsync |
| | |
| | options P1003_1B_MQUEUE |
| | options P1003_1B_SEMAPHORES # POSIX-style semaphores |
| | |
| | #options MSGBUF_SIZE=65536 |
| | #options SHMALL=128 |
| | #options NSFBUFS=1024 |
| | #options MAXFILES=512 |
| | #options MAXUSERS=3 |
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ELWIX_ALFA_N2 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config