--- elwix/config/ELWIX_ALFA_N2	2014/01/16 12:47:48	1.1.2.7
+++ elwix/config/ELWIX_ALFA_N2	2014/01/24 01:28:55	1.1.2.14
@@ -10,19 +10,20 @@ ident		ELWIX_ALFA_N2
 # XXX The default load address in the Uboot environment is 0x80010000
 makeoptions	KERNLOADADDR=0x80050000
 options		HZ=1000
-options		HWPMC_HOOKS
+#options		HWPMC_HOOKS
+#device			hwpmc
 
 # The PB92 has 32mb of RAM; hard-code that
 options		AR71XX_REALMEM=32*1024*1024
 
 # It's UBOOT, not Redboot - without this, things will hang at startup
-#options	AR71XX_ENV_UBOOT
-#options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
-#options 	ATH_EEPROM_FIRMWARE	# Use EEPROM from flash
-#device		firmware		# Used by the above
+options		AR71XX_ENV_UBOOT
+options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
+options 	ATH_EEPROM_FIRMWARE	# Use EEPROM from flash
+device		firmware		# Used by the above
 
-#device		etherswitch
-#device		arswitch
+device		etherswitch
+device		arswitch
 
 hints		"ELWIX_ALFA_N2.hints"
 include		"../atheros/std.ar71xx"
@@ -36,7 +37,6 @@ makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug 
 options		SCHED_4BSD		#4BSD scheduler
 options		INET			#InterNETworking
 options		INET6
-# options		NFSCL			#Network Filesystem Client
 options		PSEUDOFS		#Pseudo-filesystem framework
 options		_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
 options		ALQ
@@ -64,11 +64,12 @@ device		ar724x_pci
 # NVRAM U-Boot Environment -> Kernel environment
 device		nvram2env
 
+options 	NFSCL			# New Network Filesystem Client
 #options 	NFSD			# New Network Filesystem Server
-#options 	NFSCLIENT		#Network File System client
+options 	NFSCLIENT		#Network File System client
 #options 	NFSSERVER		#Network File System server
-#options 	NFSLOCKD		# Network Lock Manager
-#options 	NFS_ROOT		# NFS usable as /, requires NFSCL
+options 	NFSLOCKD		# Network Lock Manager
+options 	NFS_ROOT		# NFS usable as /, requires NFSCL
 #options 	BOOTP			# Use BOOTP to obtain IP address/hostname
 					# Requires NFSCLIENT and NFS_ROOT
 #options 	BOOTP_NFSROOT		# NFS mount root filesystem using BOOTP info
@@ -78,7 +79,7 @@ device		nvram2env
 
 options 	GEOM_LABEL		# Provides labelization
 options 	GEOM_UZIP
-device		geom_uzip	# compressed in-memory filesystem support
+device		geom_uzip		# compressed in-memory filesystem support
 
 # Wireless NIC cards
 options		IEEE80211_DEBUG
@@ -121,27 +122,31 @@ options		AH_AR5416_INTERRUPT_MITIGATION
 device		mii
 device		arge
 #options 	ARGE_DEBUG	# Enable if_arge debugging for now
-#options 	ARGE_MDIO		# Export an MDIO bus separate from arge
-#device		miiproxy		# MDIO bus <-> MII PHY rendezvous
+options 	ARGE_MDIO		# Export an MDIO bus separate from arge
+device		miiproxy		# MDIO bus <-> MII PHY rendezvous
 
 # USB devices - PB92 has EHCI only
 
-device		usb
-options		USB_EHCI_BIG_ENDIAN_DESC        # handle big-endian byte order
-#options		USB_DEBUG
-options		USB_HOST_ALIGN=32
-device		ehci
+#device		usb
+#options		USB_EHCI_BIG_ENDIAN_DESC        # handle big-endian byte order
+##options		USB_DEBUG
+#options		USB_HOST_ALIGN=32
+#device		ehci
 
 # Mass storage
-device		scbus
-device		umass
-device		da
+#device		scbus
+#device		umass
+#device		da
 
 # Read MSDOS formatted disks
 options		GEOM_PART_BSD
 options		GEOM_PART_MBR
-options		MSDOSFS
 
+options 	NULLFS
+options 	UNIONFS
+#options 	TMPFS
+#options	MSDOSFS
+
 # GPIO Bus
 device		gpio
 device		gpioled
@@ -160,11 +165,10 @@ device		ar71xx_wdog
 device		uart
 device		uart_ar71xx
 
-device		pty
-
 # Network twiddling
 device		loop
 device		ether
+device		vlan
 device		md
 device		bpf
 device		random