--- elwix/config/ELWIX_ALFA_N2	2014/01/16 12:47:48	1.1.2.7
+++ elwix/config/ELWIX_ALFA_N2	2014/01/21 23:40:16	1.1.2.11
@@ -10,19 +10,19 @@ ident		ELWIX_ALFA_N2
 # XXX The default load address in the Uboot environment is 0x80010000
 makeoptions	KERNLOADADDR=0x80050000
 options		HZ=1000
-options		HWPMC_HOOKS
+#options		HWPMC_HOOKS
 
 # The PB92 has 32mb of RAM; hard-code that
 options		AR71XX_REALMEM=32*1024*1024
 
 # It's UBOOT, not Redboot - without this, things will hang at startup
-#options	AR71XX_ENV_UBOOT
-#options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
+options		AR71XX_ENV_UBOOT
+options 	AR71XX_ATH_EEPROM	# Fetch EEPROM/PCI config from flash
 #options 	ATH_EEPROM_FIRMWARE	# Use EEPROM from flash
 #device		firmware		# Used by the above
 
-#device		etherswitch
-#device		arswitch
+device		etherswitch
+device		arswitch
 
 hints		"ELWIX_ALFA_N2.hints"
 include		"../atheros/std.ar71xx"
@@ -36,7 +36,6 @@ makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug 
 options		SCHED_4BSD		#4BSD scheduler
 options		INET			#InterNETworking
 options		INET6
-# options		NFSCL			#Network Filesystem Client
 options		PSEUDOFS		#Pseudo-filesystem framework
 options		_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
 options		ALQ
@@ -55,7 +54,8 @@ options         FFS                     #Berkeley Fast
 # Support uncompress lzma rootfs
 device		geom_uncompress
 options		GEOM_UNCOMPRESS
-options		ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
+options		ROOTDEVNAME=\"ufs:/dev/map/rootfs\"
+#options		ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
 
 # PCI bus
 device		pci
@@ -76,7 +76,7 @@ device		nvram2env
 #options 	BOOTP_COMPAT		# Workaround for broken bootp daemons.
 #options 	BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
 
-options 	GEOM_LABEL		# Provides labelization
+#options 	GEOM_LABEL		# Provides labelization
 options 	GEOM_UZIP
 device		geom_uzip	# compressed in-memory filesystem support
 
@@ -121,8 +121,8 @@ options		AH_AR5416_INTERRUPT_MITIGATION
 device		mii
 device		arge
 #options 	ARGE_DEBUG	# Enable if_arge debugging for now
-#options 	ARGE_MDIO		# Export an MDIO bus separate from arge
-#device		miiproxy		# MDIO bus <-> MII PHY rendezvous
+options 	ARGE_MDIO		# Export an MDIO bus separate from arge
+device		miiproxy		# MDIO bus <-> MII PHY rendezvous
 
 # USB devices - PB92 has EHCI only
 
@@ -172,8 +172,8 @@ device		if_bridge
 device		gif		# ip[46] in ip[46] tunneling protocol
 device		gre		# generic encapsulation - only for IPv4 in IPv4 though atm
 
-options		MSGBUF_SIZE=65536
-options		SHMALL=128
-options		NSFBUFS=1024
-options		MAXFILES=512
-options		MAXUSERS=3
+#options		MSGBUF_SIZE=65536
+#options		SHMALL=128
+#options		NSFBUFS=1024
+#options		MAXFILES=512
+#options		MAXUSERS=3