--- elwix/config/ELWIX_ALFA_N2.hints 2014/01/14 20:09:33 1.1.2.1 +++ elwix/config/ELWIX_ALFA_N2.hints 2014/02/18 14:11:20 1.1.2.12 @@ -1,7 +1,7 @@ # ## ELWIX - ALFA Nx kernel hints file # -# $Id: ELWIX_ALFA_N2.hints,v 1.1.2.1 2014/01/14 20:09:33 misho Exp $ +# $Id: ELWIX_ALFA_N2.hints,v 1.1.2.12 2014/02/18 14:11:20 misho Exp $ # hint.apb.0.at="nexus0" @@ -24,91 +24,94 @@ hint.ehci.0.irq=1 hint.pcib.0.at="nexus0" hint.pcib.0.irq=0 -## ath0 hint - pcie slot 0 -#hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000 -#hint.pcib.0.bus.0.0.0.ath_fixup_size=4096 +# ath0 hint - pcie slot 0 +hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000 +hint.pcib.0.bus.0.0.0.ath_fixup_size=4096 -## ath -#hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware" -## Where the ART is -#hint.ath.0.eepromaddr=0x1fff1000 +# ath +hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware" +# Where the ART is +hint.ath.0.eepromaddr=0x1fff1000 -# arge0 MDIO bus +# mdiobus on arge0 hint.argemdio.0.at="nexus0" hint.argemdio.0.maddr=0x19000000 hint.argemdio.0.msize=0x1000 hint.argemdio.0.order=0 -# arge0: MII; dedicated PHY 4 on switch, connected via internal switch -# MDIO bus. - -## hint.arge.0.eeprommac=0x83fe9ff0 -#hint.arge.0.phymask=0x10 # PHY 4 -## hint.arge.0.miimode=2 # MII -#hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus - -## arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII. -#hint.arge.1.phymask=0x0 -#hint.arge.1.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus -## hint.arge.1.miimode=1 # GMII -##hint.arge.1.media=1000 # Force to 1000BaseTX/full -##hint.arge.1.fduplex=1 - -## -## AR7240 switch config -## +# +# AR7240 switch config +# hint.arswitch.0.at="mdio0" hint.arswitch.0.is_7240=1 # We need to be explicitly told this hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3) hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY -hint.arswitch.0.is_rgmii=1 # No, not RGMII -hint.arswitch.0.is_gmii=0 # No, not GMII +hint.arswitch.0.is_rgmii=0 # No, not RGMII +hint.arswitch.0.is_gmii=1 # No, not GMII -# arge0 +# arge0: MII; dedicated PHY 4 on switch, connected via internal switch +# MDIO bus. hint.arge.0.at="nexus0" hint.arge.0.maddr=0x19000000 hint.arge.0.msize=0x1000 hint.arge.0.irq=2 +hint.arge.0.eeprommac=0x1fff0000 +hint.arge.0.phymask=0x10 # PHY 4 +# hint.arge.0.miimode=2 # MII +hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus -# AR8316 workaround for now -hint.arge.0.media=1000 -hint.arge.0.fduplex=1 -hint.arge.0.phymask=0x3 - +# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII. hint.arge.1.at="nexus0" hint.arge.1.maddr=0x1a000000 hint.arge.1.msize=0x1000 hint.arge.1.irq=3 +hint.arge.1.eeprommac=0x1fff0006 +hint.arge.1.phymask=0x0 +#hint.arge.1.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus +# hint.arge.1.miimode=1 # GMII +hint.arge.1.media=1000 # Force to 1000BaseTX/full +hint.arge.1.fduplex=1 # GPIO hint.gpio.0.at="apb0" hint.gpio.0.maddr=0x18040000 hint.gpio.0.msize=0x1000 hint.gpio.0.irq=2 +hint.gpio.0.pinmask=0x1319c3 +hint.gpio.0.function_set=0x00000000 +hint.gpio.0.function_clear=0x00000000 + # Signal leds hint.gpioled.0.at="gpiobus0" -hint.gpioled.0.name="but0" +hint.gpioled.0.name="but_0" hint.gpioled.0.pins=0x00800 # pin 11 hint.gpioled.1.at="gpiobus0" -hint.gpioled.1.name="sig2" -hint.gpioled.1.pins=0x20000 # pin 17 +hint.gpioled.1.name="led_0" +hint.gpioled.1.pins=0x0001 # pin 0 hint.gpioled.2.at="gpiobus0" -hint.gpioled.2.name="sig3" -hint.gpioled.2.pins=0x10000 # pin 16 +hint.gpioled.2.name="led_1" +hint.gpioled.2.pins=0x0002 # pin 1 +hint.gpioled.3.at="gpiobus0" +hint.gpioled.3.name="led_2" +hint.gpioled.3.pins=0x20000 # pin 17 ? hint.gpioled.4.at="gpiobus0" -hint.gpioled.4.name="sig5" -hint.gpioled.4.pins=0x01000 # pin 12 +hint.gpioled.4.name="led_3" +hint.gpioled.4.pins=0x10000 # pin 16 ? hint.gpioled.5.at="gpiobus0" -hint.gpioled.5.name="sig6" -hint.gpioled.5.pins=0x00100 # pin 8 +hint.gpioled.5.name="led_5" +hint.gpioled.5.pins=0x01000 # pin 12 hint.gpioled.6.at="gpiobus0" -hint.gpioled.6.name="sig7" -hint.gpioled.6.pins=0x00040 # pin 6 +hint.gpioled.6.name="led_6" +hint.gpioled.6.pins=0x00100 # pin 8 ? hint.gpioled.7.at="gpiobus0" -hint.gpioled.7.name="sig8" -hint.gpioled.7.pins=0x00080 # pin 7 +hint.gpioled.7.name="led_7" +hint.gpioled.7.pins=0x00040 # pin 6 ? +hint.gpioled.8.at="gpiobus0" +hint.gpioled.8.name="led_8" +hint.gpioled.8.pins=0x00080 # pin 7 ? + # SPI controller/bus hint.spi.0.at="nexus0" hint.spi.0.maddr=0x1f000000 @@ -153,32 +156,32 @@ hint.map.1.readonly=0 hint.map.2.at="flash/spi0" hint.map.2.start=0x00050000 -hint.map.2.end=0x00300000 # 2752k rootfs -#hint.map.2.end=0x00650000 # 6144k rootfs +#hint.map.2.end=0x00300000 # 2752k rootfs +hint.map.2.end=0x00650000 # 6144k rootfs hint.map.2.name="rootfs" hint.map.2.readonly=1 hint.map.3.at="flash/spi0" -hint.map.3.start=0x00300000 -hint.map.3.end=0x003e0000 # 896k uImage -#hint.map.3.start=0x00650000 -#hint.map.3.end=0x007e0000 # 1600k uImage +#hint.map.3.start=0x00300000 +#hint.map.3.end=0x003e0000 # 896k uImage +hint.map.3.start=0x00650000 +hint.map.3.end=0x007e0000 # 1600k uImage hint.map.3.name="uImage" -hint.map.3.readonly=0 +hint.map.3.readonly=1 hint.map.4.at="flash/spi0" -hint.map.4.start=0x003e0000 -hint.map.4.end=0x003f0000 # 64k NVRAM -#hint.map.4.start=0x007e0000 -#hint.map.4.end=0x007f0000 # 64k NVRAM -hint.map.4.name="NVRAM" +#hint.map.4.start=0x003e0000 +#hint.map.4.end=0x003f0000 # 64k cfg +hint.map.4.start=0x007e0000 +hint.map.4.end=0x007f0000 # 64k cfg +hint.map.4.name="cfg" hint.map.4.readonly=0 hint.map.5.at="flash/spi0" -hint.map.5.start=0x003f0000 -hint.map.5.end=0x00400000 # 64k ART -#hint.map.5.start=0x007f0000 -#hint.map.5.end=0x00800000 # 64k ART +#hint.map.5.start=0x003f0000 +#hint.map.5.end=0x00400000 # 64k ART +hint.map.5.start=0x007f0000 +hint.map.5.end=0x00800000 # 64k ART hint.map.5.name="ART" hint.map.5.readonly=1 @@ -186,4 +189,4 @@ hint.map.6.at="flash/spi0" hint.map.6.start=0x00050000 hint.map.6.end=0x007e0000 # 7744k firmware hint.map.6.name="firmware" -hint.map.6.readonly=1 +hint.map.6.readonly=0