[BACK]Return to ELWIX_ALFA_N2.hints CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config

Diff for /elwix/config/ELWIX_ALFA_N2.hints between versions 1.1.2.4 and 1.1.2.9

version 1.1.2.4, 2014/01/23 15:28:20 version 1.1.2.9, 2014/02/05 01:08:24
Line 33  hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_fi Line 33  hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_fi
 # Where the ART is  # Where the ART is
 hint.ath.0.eepromaddr=0x1fff1000  hint.ath.0.eepromaddr=0x1fff1000
   
# arge0 MDIO bus# mdiobus on arge0
 hint.argemdio.0.at="nexus0"  hint.argemdio.0.at="nexus0"
 hint.argemdio.0.maddr=0x19000000  hint.argemdio.0.maddr=0x19000000
 hint.argemdio.0.msize=0x1000  hint.argemdio.0.msize=0x1000
 hint.argemdio.0.order=0  hint.argemdio.0.order=0
   
 # arge0: MII; dedicated PHY 4 on switch, connected via internal switch  
 # MDIO bus.  
   
 # hint.arge.0.eeprommac=0x83fe9ff0  
 hint.arge.0.phymask=0x10        # PHY 4  
 # hint.arge.0.miimode=2         # MII  
 hint.arge.0.mdio=mdioproxy1     # Hanging off the arswitch MDIO bus  
   
 # arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.  
 hint.arge.1.phymask=0x0  
 hint.arge.1.mdio=mdioproxy1     # Hanging off the arswitch MDIO bus  
 # hint.arge.1.miimode=1         # GMII  
 #hint.arge.1.media=1000         # Force to 1000BaseTX/full  
 #hint.arge.1.fduplex=1  
   
 #  #
 # AR7240 switch config  # AR7240 switch config
 #  #
 hint.arswitch.0.at="mdio0"  hint.arswitch.0.at="mdio0"
 hint.arswitch.0.is_7240=1       # We need to be explicitly told this  hint.arswitch.0.is_7240=1       # We need to be explicitly told this
hint.arswitch.0.numphys=2        # 4 active switch PHYs (PHY 0 -> 3)hint.arswitch.0.numphys=4        # 4 active switch PHYs (PHY 0 -> 3)
 hint.arswitch.0.phy4cpu=1       # Yes, PHY 4 == dedicated PHY  hint.arswitch.0.phy4cpu=1       # Yes, PHY 4 == dedicated PHY
hint.arswitch.0.is_rgmii=1        # No, not RGMIIhint.arswitch.0.is_rgmii=0        # No, not RGMII
hint.arswitch.0.is_gmii=0        # No, not GMIIhint.arswitch.0.is_gmii=1        # No, not GMII
   
# arge0# arge0: MII; dedicated PHY 4 on switch, connected via internal switch
 # MDIO bus.
 hint.arge.0.at="nexus0"  hint.arge.0.at="nexus0"
 hint.arge.0.maddr=0x19000000  hint.arge.0.maddr=0x19000000
 hint.arge.0.msize=0x1000  hint.arge.0.msize=0x1000
 hint.arge.0.irq=2  hint.arge.0.irq=2
   hint.arge.0.eeprommac=0x1fff0000
   hint.arge.0.phymask=0x10        # PHY 4
   # hint.arge.0.miimode=2         # MII
   hint.arge.0.mdio=mdioproxy1     # Hanging off the arswitch MDIO bus
   
   # arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
 hint.arge.1.at="nexus0"  hint.arge.1.at="nexus0"
 hint.arge.1.maddr=0x1a000000  hint.arge.1.maddr=0x1a000000
 hint.arge.1.msize=0x1000  hint.arge.1.msize=0x1000
 hint.arge.1.irq=3  hint.arge.1.irq=3
   hint.arge.1.eeprommac=0x1fff0006
   hint.arge.1.phymask=0x0
   #hint.arge.1.mdio=mdioproxy1    # Hanging off the arswitch MDIO bus
   # hint.arge.1.miimode=1         # GMII
   #hint.arge.1.media=1000         # Force to 1000BaseTX/full
   #hint.arge.1.fduplex=1
   
 # GPIO  # GPIO
 hint.gpio.0.at="apb0"  hint.gpio.0.at="apb0"
 hint.gpio.0.maddr=0x18040000  hint.gpio.0.maddr=0x18040000
 hint.gpio.0.msize=0x1000  hint.gpio.0.msize=0x1000
 hint.gpio.0.irq=2  hint.gpio.0.irq=2
   hint.gpio.0.pinmask=0x1319c3
   
   hint.gpio.0.function_set=0x00000000
   hint.gpio.0.function_clear=0x00000000
   
 # Signal leds  # Signal leds
 hint.gpioled.0.at="gpiobus0"  hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="but0"hint.gpioled.0.name="but_0"
 hint.gpioled.0.pins=0x00800     # pin 11  hint.gpioled.0.pins=0x00800     # pin 11
 hint.gpioled.1.at="gpiobus0"  hint.gpioled.1.at="gpiobus0"
hint.gpioled.1.name="sig2"hint.gpioled.1.name="led_0"
hint.gpioled.1.pins=0x20000        # pin 17hint.gpioled.1.pins=0x0001        # pin 0
 hint.gpioled.2.at="gpiobus0"  hint.gpioled.2.at="gpiobus0"
hint.gpioled.2.name="sig3"hint.gpioled.2.name="led_1"
hint.gpioled.2.pins=0x10000    # pin 16hint.gpioled.2.pins=0x0002    # pin 1
 hint.gpioled.3.at="gpiobus0"
 hint.gpioled.3.name="led_2"
 hint.gpioled.3.pins=0x20000    # pin 17 ?
 hint.gpioled.4.at="gpiobus0"  hint.gpioled.4.at="gpiobus0"
hint.gpioled.4.name="sig5"hint.gpioled.4.name="led_3"
hint.gpioled.4.pins=0x01000     # pin 12hint.gpioled.4.pins=0x10000     # pin 16 ?
 hint.gpioled.5.at="gpiobus0"  hint.gpioled.5.at="gpiobus0"
hint.gpioled.5.name="sig6"hint.gpioled.5.name="led_5"
hint.gpioled.5.pins=0x00100      # pin 8hint.gpioled.5.pins=0x01000      # pin 12
 hint.gpioled.6.at="gpiobus0"  hint.gpioled.6.at="gpiobus0"
hint.gpioled.6.name="sig7"hint.gpioled.6.name="led_6"
hint.gpioled.6.pins=0x00040       # pin 6hint.gpioled.6.pins=0x00100       # pin 8 ?
 hint.gpioled.7.at="gpiobus0"  hint.gpioled.7.at="gpiobus0"
hint.gpioled.7.name="sig8"hint.gpioled.7.name="led_7"
hint.gpioled.7.pins=0x00080      # pin 7hint.gpioled.7.pins=0x00040      # pin 6 ?
 hint.gpioled.8.at="gpiobus0"
 hint.gpioled.8.name="led_8"
 hint.gpioled.8.pins=0x00080      # pin 7 ?
   
   
 # SPI controller/bus  # SPI controller/bus
 hint.spi.0.at="nexus0"  hint.spi.0.at="nexus0"
 hint.spi.0.maddr=0x1f000000  hint.spi.0.maddr=0x1f000000
Line 163  hint.map.3.readonly=1 Line 171  hint.map.3.readonly=1
   
 hint.map.4.at="flash/spi0"  hint.map.4.at="flash/spi0"
 #hint.map.4.start=0x003e0000  #hint.map.4.start=0x003e0000
#hint.map.4.end=0x003f0000      # 64k NVRAM#hint.map.4.end=0x003f0000      # 64k cfg
 hint.map.4.start=0x007e0000  hint.map.4.start=0x007e0000
hint.map.4.end=0x007f0000       # 64k NVRAMhint.map.4.end=0x007f0000       # 64k cfg
hint.map.4.name="NVRAM"hint.map.4.name="cfg"
 hint.map.4.readonly=0  hint.map.4.readonly=0
   
 hint.map.5.at="flash/spi0"  hint.map.5.at="flash/spi0"
Removed from v.1.1.2.4  
changed lines
  Added in v.1.1.2.9

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>