[BACK]Return to ELWIX_ALFA_N2.hints CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config

Diff for /elwix/config/ELWIX_ALFA_N2.hints between versions 1.1.2.7 and 1.1.2.13

version 1.1.2.7, 2014/02/02 12:38:37 version 1.1.2.13, 2014/02/18 15:39:52
Line 33  hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_fi Line 33  hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_fi
 # Where the ART is  # Where the ART is
 hint.ath.0.eepromaddr=0x1fff1000  hint.ath.0.eepromaddr=0x1fff1000
   
# arge0 MDIO bus# mdiobus on arge0
 hint.argemdio.0.at="nexus0"  hint.argemdio.0.at="nexus0"
 hint.argemdio.0.maddr=0x19000000  hint.argemdio.0.maddr=0x19000000
 hint.argemdio.0.msize=0x1000  hint.argemdio.0.msize=0x1000
 hint.argemdio.0.order=0  hint.argemdio.0.order=0
   
 # arge0: MII; dedicated PHY 4 on switch, connected via internal switch  
 # MDIO bus.  
   
 # hint.arge.0.eeprommac=0x83fe9ff0  
 hint.arge.0.phymask=0x10        # PHY 4  
 # hint.arge.0.miimode=2         # MII  
 hint.arge.0.mdio=mdioproxy1     # Hanging off the arswitch MDIO bus  
   
 # arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.  
 hint.arge.1.phymask=0x0  
 hint.arge.1.mdio=mdioproxy1     # Hanging off the arswitch MDIO bus  
 # hint.arge.1.miimode=1         # GMII  
 #hint.arge.1.media=1000         # Force to 1000BaseTX/full  
 #hint.arge.1.fduplex=1  
   
 #  #
 # AR7240 switch config  # AR7240 switch config
 #  #
 hint.arswitch.0.at="mdio0"  hint.arswitch.0.at="mdio0"
 hint.arswitch.0.is_7240=1       # We need to be explicitly told this  hint.arswitch.0.is_7240=1       # We need to be explicitly told this
hint.arswitch.0.numphys=2        # 4 active switch PHYs (PHY 0 -> 3)hint.arswitch.0.numphys=4        # 4 active switch PHYs (PHY 0 -> 3)
 hint.arswitch.0.phy4cpu=1       # Yes, PHY 4 == dedicated PHY  hint.arswitch.0.phy4cpu=1       # Yes, PHY 4 == dedicated PHY
hint.arswitch.0.is_rgmii=1        # No, not RGMIIhint.arswitch.0.is_rgmii=0        # No, not RGMII
hint.arswitch.0.is_gmii=0        # No, not GMIIhint.arswitch.0.is_gmii=1        # No, not GMII
   
# arge0# arge0: MII; dedicated PHY 4 on switch, connected via internal switch
 # MDIO bus.
 hint.arge.0.at="nexus0"  hint.arge.0.at="nexus0"
 hint.arge.0.maddr=0x19000000  hint.arge.0.maddr=0x19000000
 hint.arge.0.msize=0x1000  hint.arge.0.msize=0x1000
 hint.arge.0.irq=2  hint.arge.0.irq=2
 hint.arge.0.eeprommac=0x1fff0000  hint.arge.0.eeprommac=0x1fff0000
   hint.arge.0.phymask=0x10        # PHY 4
   # hint.arge.0.miimode=2         # MII
   hint.arge.0.mdio=mdioproxy1     # Hanging off the arswitch MDIO bus
   
   # arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
 hint.arge.1.at="nexus0"  hint.arge.1.at="nexus0"
 hint.arge.1.maddr=0x1a000000  hint.arge.1.maddr=0x1a000000
 hint.arge.1.msize=0x1000  hint.arge.1.msize=0x1000
 hint.arge.1.irq=3  hint.arge.1.irq=3
 hint.arge.1.eeprommac=0x1fff0006  hint.arge.1.eeprommac=0x1fff0006
   hint.arge.1.phymask=0x0
   #hint.arge.1.mdio=mdioproxy1    # Hanging off the arswitch MDIO bus
   # hint.arge.1.miimode=1         # GMII
   hint.arge.1.media=1000          # Force to 1000BaseTX/full
   hint.arge.1.fduplex=1
   
 # GPIO  # GPIO
 hint.gpio.0.at="apb0"  hint.gpio.0.at="apb0"
 hint.gpio.0.maddr=0x18040000  hint.gpio.0.maddr=0x18040000
 hint.gpio.0.msize=0x1000  hint.gpio.0.msize=0x1000
 hint.gpio.0.irq=2  hint.gpio.0.irq=2
#hint.gpio.0.pinmask=0x319c0hint.gpio.0.pinmask=0x319c0
hint.gpio.0.pinmask=0xfffff 
   
   hint.gpio.0.function_set=0x00000000
   hint.gpio.0.function_clear=0x00000000
   
 # Signal leds  # Signal leds
 hint.gpioled.0.at="gpiobus0"  hint.gpioled.0.at="gpiobus0"
 hint.gpioled.0.name="but_0"  hint.gpioled.0.name="but_0"
Line 108  hint.gpioled.8.at="gpiobus0" Line 105  hint.gpioled.8.at="gpiobus0"
 hint.gpioled.8.name="led_8"  hint.gpioled.8.name="led_8"
 hint.gpioled.8.pins=0x00080     # pin 7 ?  hint.gpioled.8.pins=0x00080     # pin 7 ?
   
 hint.gpioled.10.at="gpiobus0"  
 hint.gpioled.10.name="led6"  
 hint.gpioled.10.pins=0x02000    # pin 13 ?  
 hint.gpioled.11.at="gpiobus0"  
 hint.gpioled.11.name="led7"  
 hint.gpioled.11.pins=0x04000    # pin 14 ?  
 hint.gpioled.12.at="gpiobus0"  
 hint.gpioled.12.name="led8"  
 hint.gpioled.12.pins=0x08000    # pin 15 ?  
   
 hint.gpioled.13.at="gpiobus0"  
 hint.gpioled.13.name="led9"  
 hint.gpioled.13.pins=0x00400    # pin 10 ?  
 hint.gpioled.14.at="gpiobus0"  
 hint.gpioled.14.name="led99"  
 hint.gpioled.14.pins=0x00200    # pin 9 ?  
   
 hint.gpioled.15.at="gpiobus0"  
 hint.gpioled.15.name="ledA"  
 hint.gpioled.15.pins=0x00020    # pin 5 ?  
 hint.gpioled.16.at="gpiobus0"  
 hint.gpioled.16.name="ledB"  
 hint.gpioled.16.pins=0x00010    # pin 4 ?  
 hint.gpioled.17.at="gpiobus0"  
 hint.gpioled.17.name="ledC"  
 hint.gpioled.17.pins=0x00008    # pin 3 ?  
 hint.gpioled.18.at="gpiobus0"  
 hint.gpioled.18.name="ledD"  
 hint.gpioled.18.pins=0x00004    # pin 2 ?  
 hint.gpioled.19.at="gpiobus0"  
 hint.gpioled.19.name="ledE"  
 hint.gpioled.19.pins=0x00002    # pin 1 ?  
 hint.gpioled.20.at="gpiobus0"  
 hint.gpioled.20.name="ledF"  
 hint.gpioled.20.pins=0x00001    # pin 0 ?  
   
 # SPI controller/bus  # SPI controller/bus
 hint.spi.0.at="nexus0"  hint.spi.0.at="nexus0"
Removed from v.1.1.2.7  
changed lines
  Added in v.1.1.2.13

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>