--- elwix/config/ELWIX_ALFA_N2.hints	2014/01/20 00:04:35	1.1.2.3
+++ elwix/config/ELWIX_ALFA_N2.hints	2014/02/06 23:22:32	1.1.2.11
@@ -1,7 +1,7 @@
 #
 ## ELWIX - ALFA Nx kernel hints file
 #
-# $Id: ELWIX_ALFA_N2.hints,v 1.1.2.3 2014/01/20 00:04:35 misho Exp $
+# $Id: ELWIX_ALFA_N2.hints,v 1.1.2.11 2014/02/06 23:22:32 misho Exp $
 #
 
 hint.apb.0.at="nexus0"
@@ -33,77 +33,85 @@ hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_fi
 # Where the ART is
 hint.ath.0.eepromaddr=0x1fff1000
 
-# arge0 MDIO bus
+# mdiobus on arge0
 hint.argemdio.0.at="nexus0"
 hint.argemdio.0.maddr=0x19000000
 hint.argemdio.0.msize=0x1000
 hint.argemdio.0.order=0
 
-# arge0: MII; dedicated PHY 4 on switch, connected via internal switch
-# MDIO bus.
-
-# hint.arge.0.eeprommac=0x83fe9ff0
-hint.arge.0.phymask=0x10	# PHY 4
-# hint.arge.0.miimode=2		# MII
-hint.arge.0.mdio=mdioproxy1	# Hanging off the arswitch MDIO bus
-
-# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
-hint.arge.1.phymask=0x0
-hint.arge.1.mdio=mdioproxy1	# Hanging off the arswitch MDIO bus
-# hint.arge.1.miimode=1		# GMII
-#hint.arge.1.media=1000		# Force to 1000BaseTX/full
-#hint.arge.1.fduplex=1
-
 #
 # AR7240 switch config
 #
 hint.arswitch.0.at="mdio0"
 hint.arswitch.0.is_7240=1	# We need to be explicitly told this
-hint.arswitch.0.numphys=2	# 4 active switch PHYs (PHY 0 -> 3)
+hint.arswitch.0.numphys=4	# 4 active switch PHYs (PHY 0 -> 3)
 hint.arswitch.0.phy4cpu=1	# Yes, PHY 4 == dedicated PHY
-hint.arswitch.0.is_rgmii=1	# No, not RGMII
-hint.arswitch.0.is_gmii=0	# No, not GMII
+hint.arswitch.0.is_rgmii=0	# No, not RGMII
+hint.arswitch.0.is_gmii=1	# No, not GMII
 
-# arge0
+# arge0: MII; dedicated PHY 4 on switch, connected via internal switch
+# MDIO bus.
 hint.arge.0.at="nexus0"
 hint.arge.0.maddr=0x19000000
 hint.arge.0.msize=0x1000
 hint.arge.0.irq=2
+hint.arge.0.eeprommac=0x1fff0000
+hint.arge.0.phymask=0x10	# PHY 4
+# hint.arge.0.miimode=2		# MII
+hint.arge.0.mdio=mdioproxy1	# Hanging off the arswitch MDIO bus
 
+# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
 hint.arge.1.at="nexus0"
 hint.arge.1.maddr=0x1a000000
 hint.arge.1.msize=0x1000
 hint.arge.1.irq=3
+hint.arge.1.eeprommac=0x1fff0006
+hint.arge.1.phymask=0x0
+#hint.arge.1.mdio=mdioproxy1	# Hanging off the arswitch MDIO bus
+# hint.arge.1.miimode=1		# GMII
+hint.arge.1.media=1000		# Force to 1000BaseTX/full
+hint.arge.1.fduplex=1
 
 # GPIO
 hint.gpio.0.at="apb0"
 hint.gpio.0.maddr=0x18040000
 hint.gpio.0.msize=0x1000
 hint.gpio.0.irq=2
+hint.gpio.0.pinmask=0x1319c3
 
+hint.gpio.0.function_set=0x00000000
+hint.gpio.0.function_clear=0x00000000
+
 # Signal leds
 hint.gpioled.0.at="gpiobus0"
-hint.gpioled.0.name="but0"
+hint.gpioled.0.name="but_0"
 hint.gpioled.0.pins=0x00800	# pin 11
 hint.gpioled.1.at="gpiobus0"
-hint.gpioled.1.name="sig2"
-hint.gpioled.1.pins=0x20000	# pin 17
+hint.gpioled.1.name="led_0"
+hint.gpioled.1.pins=0x0001	# pin 0
 hint.gpioled.2.at="gpiobus0"
-hint.gpioled.2.name="sig3"
-hint.gpioled.2.pins=0x10000	# pin 16
+hint.gpioled.2.name="led_1"
+hint.gpioled.2.pins=0x0002	# pin 1
+hint.gpioled.3.at="gpiobus0"
+hint.gpioled.3.name="led_2"
+hint.gpioled.3.pins=0x20000	# pin 17 ?
 hint.gpioled.4.at="gpiobus0"
-hint.gpioled.4.name="sig5"
-hint.gpioled.4.pins=0x01000	# pin 12
+hint.gpioled.4.name="led_3"
+hint.gpioled.4.pins=0x10000	# pin 16 ?
 hint.gpioled.5.at="gpiobus0"
-hint.gpioled.5.name="sig6"
-hint.gpioled.5.pins=0x00100	# pin 8
+hint.gpioled.5.name="led_5"
+hint.gpioled.5.pins=0x01000	# pin 12
 hint.gpioled.6.at="gpiobus0"
-hint.gpioled.6.name="sig7"
-hint.gpioled.6.pins=0x00040	# pin 6
+hint.gpioled.6.name="led_6"
+hint.gpioled.6.pins=0x00100	# pin 8 ?
 hint.gpioled.7.at="gpiobus0"
-hint.gpioled.7.name="sig8"
-hint.gpioled.7.pins=0x00080	# pin 7
+hint.gpioled.7.name="led_7"
+hint.gpioled.7.pins=0x00040	# pin 6 ?
+hint.gpioled.8.at="gpiobus0"
+hint.gpioled.8.name="led_8"
+hint.gpioled.8.pins=0x00080	# pin 7 ?
 
+
 # SPI controller/bus
 hint.spi.0.at="nexus0"
 hint.spi.0.maddr=0x1f000000
@@ -159,14 +167,14 @@ hint.map.3.at="flash/spi0"
 hint.map.3.start=0x00650000
 hint.map.3.end=0x007e0000	# 1600k uImage
 hint.map.3.name="uImage"
-hint.map.3.readonly=0
+hint.map.3.readonly=1
 
 hint.map.4.at="flash/spi0"
 #hint.map.4.start=0x003e0000
-#hint.map.4.end=0x003f0000	# 64k NVRAM
+#hint.map.4.end=0x003f0000	# 64k cfg
 hint.map.4.start=0x007e0000
-hint.map.4.end=0x007f0000	# 64k NVRAM
-hint.map.4.name="NVRAM"
+hint.map.4.end=0x007f0000	# 64k cfg
+hint.map.4.name="cfg"
 hint.map.4.readonly=0
 
 hint.map.5.at="flash/spi0"
@@ -177,8 +185,8 @@ hint.map.5.end=0x00800000	# 64k ART
 hint.map.5.name="ART"
 hint.map.5.readonly=1
 
-hint.map.6.at="flash/spi0"
-hint.map.6.start=0x00050000
-hint.map.6.end=0x007e0000	# 7744k firmware
-hint.map.6.name="firmware"
-hint.map.6.readonly=1
+#hint.map.6.at="flash/spi0"
+#hint.map.6.start=0x00050000
+#hint.map.6.end=0x007e0000	# 7744k firmware
+#hint.map.6.name="firmware"
+#hint.map.6.readonly=0