--- elwix/config/ELWIX_ALFA_N2.hints	2014/02/04 09:26:36	1.1.2.8
+++ elwix/config/ELWIX_ALFA_N2.hints	2014/02/06 23:22:32	1.1.2.11
@@ -1,7 +1,7 @@
 #
 ## ELWIX - ALFA Nx kernel hints file
 #
-# $Id: ELWIX_ALFA_N2.hints,v 1.1.2.8 2014/02/04 09:26:36 misho Exp $
+# $Id: ELWIX_ALFA_N2.hints,v 1.1.2.11 2014/02/06 23:22:32 misho Exp $
 #
 
 hint.apb.0.at="nexus0"
@@ -32,31 +32,13 @@ hint.pcib.0.bus.0.0.0.ath_fixup_size=4096
 hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"
 # Where the ART is
 hint.ath.0.eepromaddr=0x1fff1000
-hint.ath.0.irq=48
-hint.ath.0.maddr=0x10000000
-hint.ath.0.msize=0x30000
 
-# mdiobus on arge1
+# mdiobus on arge0
 hint.argemdio.0.at="nexus0"
-hint.argemdio.0.maddr=0x1a000000
+hint.argemdio.0.maddr=0x19000000
 hint.argemdio.0.msize=0x1000
 hint.argemdio.0.order=0
 
-# arge0: MII; dedicated PHY 4 on switch, connected via internal switch
-# MDIO bus.
-
-# hint.arge.0.eeprommac=0x83fe9ff0
-hint.arge.0.phymask=0x10	# PHY 4
-# hint.arge.0.miimode=2		# MII
-hint.arge.0.mdio=mdioproxy1	# Hanging off the arswitch MDIO bus
-
-# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
-hint.arge.1.phymask=0x0
-#hint.arge.1.mdio=mdioproxy1	# Hanging off the arswitch MDIO bus
-# hint.arge.1.miimode=1		# GMII
-#hint.arge.1.media=1000		# Force to 1000BaseTX/full
-#hint.arge.1.fduplex=1
-
 #
 # AR7240 switch config
 #
@@ -65,27 +47,37 @@ hint.arswitch.0.is_7240=1	# We need to be explicitly t
 hint.arswitch.0.numphys=4	# 4 active switch PHYs (PHY 0 -> 3)
 hint.arswitch.0.phy4cpu=1	# Yes, PHY 4 == dedicated PHY
 hint.arswitch.0.is_rgmii=0	# No, not RGMII
-hint.arswitch.0.is_gmii=0	# No, not GMII
+hint.arswitch.0.is_gmii=1	# No, not GMII
 
-# arge0
+# arge0: MII; dedicated PHY 4 on switch, connected via internal switch
+# MDIO bus.
 hint.arge.0.at="nexus0"
 hint.arge.0.maddr=0x19000000
 hint.arge.0.msize=0x1000
 hint.arge.0.irq=2
 hint.arge.0.eeprommac=0x1fff0000
+hint.arge.0.phymask=0x10	# PHY 4
+# hint.arge.0.miimode=2		# MII
+hint.arge.0.mdio=mdioproxy1	# Hanging off the arswitch MDIO bus
 
+# arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
 hint.arge.1.at="nexus0"
 hint.arge.1.maddr=0x1a000000
 hint.arge.1.msize=0x1000
 hint.arge.1.irq=3
 hint.arge.1.eeprommac=0x1fff0006
+hint.arge.1.phymask=0x0
+#hint.arge.1.mdio=mdioproxy1	# Hanging off the arswitch MDIO bus
+# hint.arge.1.miimode=1		# GMII
+hint.arge.1.media=1000		# Force to 1000BaseTX/full
+hint.arge.1.fduplex=1
 
 # GPIO
 hint.gpio.0.at="apb0"
 hint.gpio.0.maddr=0x18040000
 hint.gpio.0.msize=0x1000
 hint.gpio.0.irq=2
-hint.gpio.0.pinmask=0x319c3
+hint.gpio.0.pinmask=0x1319c3
 
 hint.gpio.0.function_set=0x00000000
 hint.gpio.0.function_clear=0x00000000
@@ -193,8 +185,8 @@ hint.map.5.end=0x00800000	# 64k ART
 hint.map.5.name="ART"
 hint.map.5.readonly=1
 
-hint.map.6.at="flash/spi0"
-hint.map.6.start=0x00050000
-hint.map.6.end=0x007e0000	# 7744k firmware
-hint.map.6.name="firmware"
-hint.map.6.readonly=0
+#hint.map.6.at="flash/spi0"
+#hint.map.6.start=0x00050000
+#hint.map.6.end=0x007e0000	# 7744k firmware
+#hint.map.6.name="firmware"
+#hint.map.6.readonly=0