Annotation of elwix/config/ELWIX_ALFA_N2.hints, revision 1.1.2.5

1.1.2.1   misho       1: #
                      2: ## ELWIX - ALFA Nx kernel hints file
                      3: #
1.1.2.5 ! misho       4: # $Id: ELWIX_ALFA_N2.hints,v 1.1.2.4 2014/01/23 15:28:20 misho Exp $
1.1.2.1   misho       5: #
                      6: 
                      7: hint.apb.0.at="nexus0"
                      8: hint.apb.0.irq=4
                      9: 
                     10: # uart0
                     11: hint.uart.0.at="apb0"
                     12: # see atheros/uart_cpu_ar71xx.c why +3
                     13: hint.uart.0.maddr=0x18020003
                     14: hint.uart.0.msize=0x18
                     15: hint.uart.0.irq=3
                     16: 
                     17: #ehci - note the 0x100 offset for the AR913x/AR724x
                     18: hint.ehci.0.at="nexus0"
                     19: hint.ehci.0.maddr=0x1b000100
                     20: hint.ehci.0.msize=0x00ffff00
                     21: hint.ehci.0.irq=1
                     22: 
                     23: # pci
                     24: hint.pcib.0.at="nexus0"
                     25: hint.pcib.0.irq=0
                     26: 
1.1.2.3   misho      27: # ath0 hint - pcie slot 0
                     28: hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000
                     29: hint.pcib.0.bus.0.0.0.ath_fixup_size=4096
                     30: 
                     31: # ath
                     32: hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"
                     33: # Where the ART is
                     34: hint.ath.0.eepromaddr=0x1fff1000
1.1.2.1   misho      35: 
                     36: # arge0 MDIO bus
                     37: hint.argemdio.0.at="nexus0"
                     38: hint.argemdio.0.maddr=0x19000000
                     39: hint.argemdio.0.msize=0x1000
                     40: hint.argemdio.0.order=0
                     41: 
                     42: # arge0: MII; dedicated PHY 4 on switch, connected via internal switch
                     43: # MDIO bus.
                     44: 
1.1.2.3   misho      45: # hint.arge.0.eeprommac=0x83fe9ff0
                     46: hint.arge.0.phymask=0x10       # PHY 4
                     47: # hint.arge.0.miimode=2                # MII
                     48: hint.arge.0.mdio=mdioproxy1    # Hanging off the arswitch MDIO bus
                     49: 
                     50: # arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
                     51: hint.arge.1.phymask=0x0
                     52: hint.arge.1.mdio=mdioproxy1    # Hanging off the arswitch MDIO bus
                     53: # hint.arge.1.miimode=1                # GMII
                     54: #hint.arge.1.media=1000                # Force to 1000BaseTX/full
                     55: #hint.arge.1.fduplex=1
                     56: 
                     57: #
                     58: # AR7240 switch config
                     59: #
1.1.2.1   misho      60: hint.arswitch.0.at="mdio0"
                     61: hint.arswitch.0.is_7240=1      # We need to be explicitly told this
1.1.2.3   misho      62: hint.arswitch.0.numphys=2      # 4 active switch PHYs (PHY 0 -> 3)
1.1.2.1   misho      63: hint.arswitch.0.phy4cpu=1      # Yes, PHY 4 == dedicated PHY
                     64: hint.arswitch.0.is_rgmii=1     # No, not RGMII
                     65: hint.arswitch.0.is_gmii=0      # No, not GMII
                     66: 
                     67: # arge0
                     68: hint.arge.0.at="nexus0"
                     69: hint.arge.0.maddr=0x19000000
                     70: hint.arge.0.msize=0x1000
                     71: hint.arge.0.irq=2
                     72: 
                     73: hint.arge.1.at="nexus0"
                     74: hint.arge.1.maddr=0x1a000000
                     75: hint.arge.1.msize=0x1000
                     76: hint.arge.1.irq=3
                     77: 
                     78: # GPIO
                     79: hint.gpio.0.at="apb0"
                     80: hint.gpio.0.maddr=0x18040000
                     81: hint.gpio.0.msize=0x1000
                     82: hint.gpio.0.irq=2
                     83: 
                     84: # Signal leds
                     85: hint.gpioled.0.at="gpiobus0"
                     86: hint.gpioled.0.name="but0"
                     87: hint.gpioled.0.pins=0x00800    # pin 11
                     88: hint.gpioled.1.at="gpiobus0"
                     89: hint.gpioled.1.name="sig2"
                     90: hint.gpioled.1.pins=0x20000    # pin 17
                     91: hint.gpioled.2.at="gpiobus0"
                     92: hint.gpioled.2.name="sig3"
                     93: hint.gpioled.2.pins=0x10000    # pin 16
                     94: hint.gpioled.4.at="gpiobus0"
                     95: hint.gpioled.4.name="sig5"
                     96: hint.gpioled.4.pins=0x01000    # pin 12
                     97: hint.gpioled.5.at="gpiobus0"
                     98: hint.gpioled.5.name="sig6"
                     99: hint.gpioled.5.pins=0x00100    # pin 8
                    100: hint.gpioled.6.at="gpiobus0"
                    101: hint.gpioled.6.name="sig7"
                    102: hint.gpioled.6.pins=0x00040    # pin 6
                    103: hint.gpioled.7.at="gpiobus0"
                    104: hint.gpioled.7.name="sig8"
                    105: hint.gpioled.7.pins=0x00080    # pin 7
                    106: 
                    107: # SPI controller/bus
                    108: hint.spi.0.at="nexus0"
                    109: hint.spi.0.maddr=0x1f000000
                    110: hint.spi.0.msize=0x10
                    111: 
                    112: # SPI flash
                    113: hint.mx25l.0.at="spibus0"
                    114: hint.mx25l.0.cs=0
                    115: 
                    116: # Watchdog
                    117: hint.ar71xx_wdog.0.at="nexus0"
                    118: 
                    119: # nvram mapping - XXX ?
                    120: hint.nvram.0.base=0x1f030000
                    121: hint.nvram.0.maxsize=0x2000
                    122: hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
                    123: hint.nvram.1.base=0x1f032000
                    124: hint.nvram.1.maxsize=0x4000
                    125: hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
                    126: 
                    127: # hwpmc device
                    128: hint.ar71xx_pmc.0.at="apb0"
                    129: hint.ar71xx_pmc.0.irq=5
                    130: 
                    131: # GEOM_MAP
                    132: #
                    133: # From my PB92 environment:
                    134: #
                    135: # mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART)
                    136: 
                    137: hint.map.0.at="flash/spi0"
                    138: hint.map.0.start=0x00000000
                    139: hint.map.0.end=0x00040000      # 256k u-boot
                    140: hint.map.0.name="u-boot"
                    141: hint.map.0.readonly=1
                    142: 
                    143: hint.map.1.at="flash/spi0"
                    144: hint.map.1.start=0x00040000
                    145: hint.map.1.end=0x00050000      # 64k u-boot-env
                    146: hint.map.1.name="u-boot-env"
                    147: hint.map.1.readonly=0
                    148: 
                    149: hint.map.2.at="flash/spi0"
                    150: hint.map.2.start=0x00050000
1.1.2.2   misho     151: #hint.map.2.end=0x00300000     # 2752k rootfs
                    152: hint.map.2.end=0x00650000      # 6144k rootfs
1.1.2.1   misho     153: hint.map.2.name="rootfs"
                    154: hint.map.2.readonly=1
                    155: 
                    156: hint.map.3.at="flash/spi0"
1.1.2.2   misho     157: #hint.map.3.start=0x00300000
                    158: #hint.map.3.end=0x003e0000     # 896k uImage
                    159: hint.map.3.start=0x00650000
                    160: hint.map.3.end=0x007e0000      # 1600k uImage
1.1.2.1   misho     161: hint.map.3.name="uImage"
1.1.2.4   misho     162: hint.map.3.readonly=1
1.1.2.1   misho     163: 
                    164: hint.map.4.at="flash/spi0"
1.1.2.2   misho     165: #hint.map.4.start=0x003e0000
1.1.2.5 ! misho     166: #hint.map.4.end=0x003f0000     # 64k cfg
1.1.2.2   misho     167: hint.map.4.start=0x007e0000
1.1.2.5 ! misho     168: hint.map.4.end=0x007f0000      # 64k cfg
        !           169: hint.map.4.name="cfg"
1.1.2.1   misho     170: hint.map.4.readonly=0
                    171: 
                    172: hint.map.5.at="flash/spi0"
1.1.2.2   misho     173: #hint.map.5.start=0x003f0000
                    174: #hint.map.5.end=0x00400000     # 64k ART
                    175: hint.map.5.start=0x007f0000
                    176: hint.map.5.end=0x00800000      # 64k ART
1.1.2.1   misho     177: hint.map.5.name="ART"
                    178: hint.map.5.readonly=1
                    179: 
                    180: hint.map.6.at="flash/spi0"
                    181: hint.map.6.start=0x00050000
                    182: hint.map.6.end=0x007e0000      # 7744k firmware
                    183: hint.map.6.name="firmware"
1.1.2.4   misho     184: hint.map.6.readonly=0

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>