Annotation of elwix/config/ELWIX_ALFA_N2.hints, revision 1.2
1.2 ! misho 1: #
! 2: ## ELWIX - ALFA Nx kernel hints file
! 3: #
! 4: # $Id: ELWIX_ALFA_N2.hints,v 1.1.2.16 2014/02/24 22:44:27 misho Exp $
! 5: #
! 6:
! 7: hint.apb.0.at="nexus0"
! 8: hint.apb.0.irq=4
! 9:
! 10: # uart0
! 11: hint.uart.0.at="apb0"
! 12: # see atheros/uart_cpu_ar71xx.c why +3
! 13: hint.uart.0.maddr=0x18020003
! 14: hint.uart.0.msize=0x18
! 15: hint.uart.0.irq=3
! 16:
! 17: #ehci - note the 0x100 offset for the AR913x/AR724x
! 18: hint.ehci.0.at="nexus0"
! 19: hint.ehci.0.maddr=0x1b000100
! 20: hint.ehci.0.msize=0x00ffff00
! 21: hint.ehci.0.irq=1
! 22:
! 23: # pci
! 24: hint.pcib.0.at="nexus0"
! 25: hint.pcib.0.irq=0
! 26:
! 27: # ath0 hint - pcie slot 0
! 28: hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff1000
! 29: hint.pcib.0.bus.0.0.0.ath_fixup_size=4096
! 30:
! 31: # ath
! 32: hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"
! 33: # Where the ART is
! 34: hint.ath.0.eepromaddr=0x1fff1000
! 35:
! 36: # mdiobus on arge0
! 37: hint.argemdio.0.at="nexus0"
! 38: hint.argemdio.0.maddr=0x19000000
! 39: hint.argemdio.0.msize=0x1000
! 40: hint.argemdio.0.order=0
! 41:
! 42: #
! 43: # AR7240 switch config
! 44: #
! 45: hint.arswitch.0.at="mdio0"
! 46: hint.arswitch.0.is_7240=1 # We need to be explicitly told this
! 47: hint.arswitch.0.numphys=4 # 4 active switch PHYs (PHY 0 -> 3)
! 48: hint.arswitch.0.phy4cpu=1 # Yes, PHY 4 == dedicated PHY
! 49: hint.arswitch.0.is_rgmii=0 # No, not RGMII
! 50: hint.arswitch.0.is_gmii=1 # No, not GMII
! 51:
! 52: # arge0: MII; dedicated PHY 4 on switch, connected via internal switch
! 53: # MDIO bus.
! 54: hint.arge.0.at="nexus0"
! 55: hint.arge.0.maddr=0x19000000
! 56: hint.arge.0.msize=0x1000
! 57: hint.arge.0.irq=2
! 58: hint.arge.0.eeprommac=0x1fff0000
! 59: hint.arge.0.phymask=0x10 # PHY 4
! 60: # hint.arge.0.miimode=2 # MII
! 61: hint.arge.0.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus
! 62:
! 63: # arge1: connected to the LAN switch MAC, at 1000BaseTX / GMII.
! 64: hint.arge.1.at="nexus0"
! 65: hint.arge.1.maddr=0x1a000000
! 66: hint.arge.1.msize=0x1000
! 67: hint.arge.1.irq=3
! 68: hint.arge.1.eeprommac=0x1fff0006
! 69: hint.arge.1.phymask=0x0
! 70: #hint.arge.1.mdio=mdioproxy1 # Hanging off the arswitch MDIO bus
! 71: # hint.arge.1.miimode=1 # GMII
! 72: hint.arge.1.media=1000 # Force to 1000BaseTX/full
! 73: hint.arge.1.fduplex=1
! 74:
! 75: # GPIO
! 76: hint.gpio.0.at="apb0"
! 77: hint.gpio.0.maddr=0x18040000
! 78: hint.gpio.0.msize=0x1000
! 79: hint.gpio.0.irq=2
! 80: hint.gpio.0.pinmask=0x319c0
! 81:
! 82: hint.gpio.0.function_set=0x00000001
! 83: hint.gpio.0.function_clear=0x00000038
! 84:
! 85: # Signal leds
! 86: hint.gpioled.0.at="gpiobus0"
! 87: hint.gpioled.0.name="but_0"
! 88: hint.gpioled.0.pins=0x00800 # pin 11
! 89: hint.gpioled.2.at="gpiobus0"
! 90: hint.gpioled.2.name="led_2"
! 91: hint.gpioled.2.pins=0x20000 # pin 17 ?
! 92: hint.gpioled.3.at="gpiobus0"
! 93: hint.gpioled.3.name="led_3"
! 94: hint.gpioled.3.pins=0x10000 # pin 16 ?
! 95: hint.gpioled.5.at="gpiobus0"
! 96: hint.gpioled.5.name="led_5"
! 97: hint.gpioled.5.pins=0x01000 # pin 12
! 98: hint.gpioled.6.at="gpiobus0"
! 99: hint.gpioled.6.name="led_6"
! 100: hint.gpioled.6.pins=0x00100 # pin 8 ?
! 101: hint.gpioled.7.at="gpiobus0"
! 102: hint.gpioled.7.name="led_7"
! 103: hint.gpioled.7.pins=0x00040 # pin 6 ?
! 104: hint.gpioled.8.at="gpiobus0"
! 105: hint.gpioled.8.name="led_8"
! 106: hint.gpioled.8.pins=0x00080 # pin 7 ?
! 107:
! 108:
! 109: # SPI controller/bus
! 110: hint.spi.0.at="nexus0"
! 111: hint.spi.0.maddr=0x1f000000
! 112: hint.spi.0.msize=0x10
! 113:
! 114: # SPI flash
! 115: hint.mx25l.0.at="spibus0"
! 116: hint.mx25l.0.cs=0
! 117:
! 118: # Watchdog
! 119: hint.ar71xx_wdog.0.at="nexus0"
! 120:
! 121: # nvram mapping - XXX ?
! 122: hint.nvram.0.base=0x1f030000
! 123: hint.nvram.0.maxsize=0x2000
! 124: hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
! 125: hint.nvram.1.base=0x1f032000
! 126: hint.nvram.1.maxsize=0x4000
! 127: hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
! 128:
! 129: # hwpmc device
! 130: hint.ar71xx_pmc.0.at="apb0"
! 131: hint.ar71xx_pmc.0.irq=5
! 132:
! 133: # GEOM_MAP
! 134: #
! 135: # From my PB92 environment:
! 136: #
! 137: # mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART)
! 138:
! 139: hint.map.0.at="flash/spi0"
! 140: hint.map.0.start=0x00000000
! 141: hint.map.0.end=0x00040000 # 256k u-boot
! 142: hint.map.0.name="u-boot"
! 143: hint.map.0.readonly=1
! 144:
! 145: hint.map.1.at="flash/spi0"
! 146: hint.map.1.start=0x00040000
! 147: hint.map.1.end=0x00050000 # 64k u-boot-env
! 148: hint.map.1.name="u-boot-env"
! 149: hint.map.1.readonly=0
! 150:
! 151: hint.map.2.at="flash/spi0"
! 152: hint.map.2.start=0x00050000
! 153: #hint.map.2.end=0x00300000 # 2752k rootfs
! 154: hint.map.2.end=0x00650000 # 6144k rootfs
! 155: hint.map.2.name="rootfs"
! 156: hint.map.2.readonly=1
! 157:
! 158: hint.map.3.at="flash/spi0"
! 159: #hint.map.3.start=0x00300000
! 160: #hint.map.3.end=0x003e0000 # 896k uImage
! 161: hint.map.3.start=0x00650000
! 162: hint.map.3.end=0x007e0000 # 1600k uImage
! 163: hint.map.3.name="uImage"
! 164: hint.map.3.readonly=1
! 165:
! 166: hint.map.4.at="flash/spi0"
! 167: #hint.map.4.start=0x003e0000
! 168: #hint.map.4.end=0x003f0000 # 64k cfg
! 169: hint.map.4.start=0x007e0000
! 170: hint.map.4.end=0x007f0000 # 64k cfg
! 171: hint.map.4.name="cfg"
! 172: hint.map.4.readonly=0
! 173:
! 174: hint.map.5.at="flash/spi0"
! 175: #hint.map.5.start=0x003f0000
! 176: #hint.map.5.end=0x00400000 # 64k ART
! 177: hint.map.5.start=0x007f0000
! 178: hint.map.5.end=0x00800000 # 64k ART
! 179: hint.map.5.name="ART"
! 180: hint.map.5.readonly=1
! 181:
! 182: hint.map.6.at="flash/spi0"
! 183: hint.map.6.start=0x00050000
! 184: hint.map.6.end=0x007f0000 # 7808k firmware + cfg
! 185: hint.map.6.name="firmware"
! 186: hint.map.6.readonly=0
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>