Annotation of elwix/config/ELWIX_ALFA_N2, revision 1.1.2.12
1.1.2.1 misho 1: #
1.1.2.2 misho 2: # PB92 -- Kernel configuration file for FreeBSD/mips for Atheros PB92 reference
3: # board (AR7242)
1.1.2.1 misho 4: #
1.1.2.2 misho 5: # $FreeBSD: head/sys/mips/conf/PB92 253845 2013-07-31 17:21:18Z obrien $
1.1.2.1 misho 6: #
7:
8: machine mips mips
1.1.2.5 misho 9: ident ELWIX_ALFA_N2
1.1.2.3 misho 10: # XXX The default load address in the Uboot environment is 0x80010000
11: makeoptions KERNLOADADDR=0x80050000
1.1.2.1 misho 12: options HZ=1000
1.1.2.9 misho 13: #options HWPMC_HOOKS
1.1.2.1 misho 14:
1.1.2.2 misho 15: # The PB92 has 32mb of RAM; hard-code that
16: options AR71XX_REALMEM=32*1024*1024
1.1.2.1 misho 17:
1.1.2.2 misho 18: # It's UBOOT, not Redboot - without this, things will hang at startup
1.1.2.9 misho 19: options AR71XX_ENV_UBOOT
1.1.2.10 misho 20: options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
1.1.2.12! misho 21: options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
! 22: device firmware # Used by the above
1.1.2.1 misho 23:
1.1.2.10 misho 24: device etherswitch
25: device arswitch
1.1.2.1 misho 26:
1.1.2.4 misho 27: hints "ELWIX_ALFA_N2.hints"
1.1.2.2 misho 28: include "../atheros/std.ar71xx"
1.1.2.1 misho 29:
30: makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
31: #makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci hwpmc cam zlib"
32:
1.1.2.7 misho 33: #options DDB
1.1.2.1 misho 34: #options KDB
35:
36: options SCHED_4BSD #4BSD scheduler
37: options INET #InterNETworking
1.1.2.6 misho 38: options INET6
1.1.2.1 misho 39: options PSEUDOFS #Pseudo-filesystem framework
40: options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
1.1.2.2 misho 41: options ALQ
1.1.2.1 misho 42:
43: # Debugging for use in -current
1.1.2.2 misho 44: #options DEADLKRES
1.1.2.1 misho 45: #options INVARIANTS
46: #options INVARIANT_SUPPORT
47: #options WITNESS
48: #options WITNESS_SKIPSPIN
49: options FFS #Berkeley Fast Filesystem
1.1.2.2 misho 50: #options SOFTUPDATES #Enable FFS soft updates support
51: #options UFS_ACL #Support for access control lists
52: #options UFS_DIRHASH #Improve performance on big directories
1.1.2.1 misho 53:
1.1.2.2 misho 54: # Support uncompress lzma rootfs
55: device geom_uncompress
56: options GEOM_UNCOMPRESS
1.1.2.12! misho 57: #options ROOTDEVNAME=\"ufs:/dev/map/rootfs\"
! 58: options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
1.1.2.2 misho 59:
60: # PCI bus
1.1.2.1 misho 61: device pci
62: device ar724x_pci
63:
1.1.2.2 misho 64: # NVRAM U-Boot Environment -> Kernel environment
65: device nvram2env
66:
1.1.2.12! misho 67: options NFSCL # New Network Filesystem Client
1.1.2.1 misho 68: #options NFSD # New Network Filesystem Server
1.1.2.12! misho 69: options NFSCLIENT #Network File System client
1.1.2.1 misho 70: #options NFSSERVER #Network File System server
1.1.2.12! misho 71: options NFSLOCKD # Network Lock Manager
! 72: options NFS_ROOT # NFS usable as /, requires NFSCL
1.1.2.1 misho 73: #options BOOTP # Use BOOTP to obtain IP address/hostname
74: # Requires NFSCLIENT and NFS_ROOT
75: #options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
76: #options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
77: #options BOOTP_COMPAT # Workaround for broken bootp daemons.
78: #options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
79:
1.1.2.9 misho 80: #options GEOM_LABEL # Provides labelization
1.1.2.1 misho 81: options GEOM_UZIP
82: device geom_uzip # compressed in-memory filesystem support
83:
1.1.2.2 misho 84: # Wireless NIC cards
1.1.2.1 misho 85: options IEEE80211_DEBUG
86: options IEEE80211_SUPPORT_MESH
87: options IEEE80211_SUPPORT_SUPERG
88: options IEEE80211_AMPDU_AGE
1.1.2.2 misho 89: options IEEE80211_SUPPORT_TDMA
90: options IEEE80211_ALQ
1.1.2.1 misho 91: device wlan # 802.11 support
92: device wlan_wep # 802.11 WEP support
93: device wlan_ccmp # 802.11 CCMP support
94: device wlan_tkip # 802.11 TKIP support
95: device wlan_xauth # 802.11 hostap support
96: device wlan_acl
97: device wlan_amrr
98: device wlan_rssadapt
99:
100: # Atheros wireless NICs
101: device ath # Atheros interface support
102: device ath_pci # Atheros PCI/Cardbus bus
103: device ath_ahb
104: options ATH_DEBUG
105: options ATH_ENABLE_11N
1.1.2.2 misho 106: options ATH_DIAGAPI
107:
1.1.2.6 misho 108: device ath_hal
1.1.2.2 misho 109: options AH_SUPPORT_AR5416
1.1.2.1 misho 110: options AH_DEBUG
111: options AH_DEBUG_ALQ
1.1.2.2 misho 112:
1.1.2.1 misho 113: #option AH_SUPPORT_AR9130 # Makes other chipsets not function!
114: device ath_rate_sample
1.1.2.9 misho 115: options AH_RXCFG_SDMAMW_4BYTES
1.1.2.7 misho 116: options AH_AR5416_INTERRUPT_MITIGATION
1.1.2.1 misho 117: # There's no DFS radar detection support yet so this won't actually
118: # detect radars. It however does enable the rest of the channel change
119: # machinery so DFS can be debugged.
120: #option ATH_ENABLE_DFS
121:
122: device mii
123: device arge
1.1.2.2 misho 124: #options ARGE_DEBUG # Enable if_arge debugging for now
1.1.2.10 misho 125: options ARGE_MDIO # Export an MDIO bus separate from arge
126: device miiproxy # MDIO bus <-> MII PHY rendezvous
1.1.2.1 misho 127:
1.1.2.6 misho 128: # USB devices - PB92 has EHCI only
129:
130: device usb
1.1.2.1 misho 131: options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
132: #options USB_DEBUG
1.1.2.2 misho 133: options USB_HOST_ALIGN=32
1.1.2.6 misho 134: device ehci
1.1.2.1 misho 135:
1.1.2.2 misho 136: # Mass storage
1.1.2.1 misho 137: device scbus
1.1.2.6 misho 138: device umass
1.1.2.1 misho 139: device da
140:
1.1.2.2 misho 141: # Read MSDOS formatted disks
1.1.2.6 misho 142: options GEOM_PART_BSD
143: options GEOM_PART_MBR
1.1.2.2 misho 144: options MSDOSFS
145:
146: # GPIO Bus
147: device gpio
148: device gpioled
149:
150: # SPI and flash
1.1.2.1 misho 151: device spibus
152: device ar71xx_spi
153: device mx25l
1.1.2.2 misho 154:
155: # The flash is statically partitioned; add in that
156: device geom_map
157:
1.1.2.1 misho 158: device ar71xx_wdog
159:
1.1.2.2 misho 160: # Serial
1.1.2.1 misho 161: device uart
1.1.2.7 misho 162: device uart_ar71xx
163:
164: device pty
1.1.2.1 misho 165:
1.1.2.2 misho 166: # Network twiddling
1.1.2.1 misho 167: device loop
168: device ether
169: device md
170: device bpf
171: device random
172: device if_bridge
173: device gif # ip[46] in ip[46] tunneling protocol
1.1.2.2 misho 174: device gre # generic encapsulation - only for IPv4 in IPv4 though atm
1.1.2.7 misho 175:
1.1.2.12! misho 176: options MSGBUF_SIZE=65536
! 177: options SHMALL=128
! 178: options NSFBUFS=1024
! 179: options MAXFILES=512
! 180: options MAXUSERS=3
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ELWIX_ALFA_N2 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config