Annotation of elwix/config/ELWIX_ALFA_N2, revision 1.1.2.16
1.1.2.1 misho 1: #
1.1.2.2 misho 2: # PB92 -- Kernel configuration file for FreeBSD/mips for Atheros PB92 reference
3: # board (AR7242)
1.1.2.1 misho 4: #
1.1.2.2 misho 5: # $FreeBSD: head/sys/mips/conf/PB92 253845 2013-07-31 17:21:18Z obrien $
1.1.2.1 misho 6: #
7:
8: machine mips mips
1.1.2.5 misho 9: ident ELWIX_ALFA_N2
1.1.2.3 misho 10: # XXX The default load address in the Uboot environment is 0x80010000
11: makeoptions KERNLOADADDR=0x80050000
1.1.2.1 misho 12: options HZ=1000
1.1.2.16! misho 13: #options HWPMC_HOOKS
! 14: #device hwpmc
1.1.2.1 misho 15:
1.1.2.2 misho 16: # The PB92 has 32mb of RAM; hard-code that
17: options AR71XX_REALMEM=32*1024*1024
1.1.2.1 misho 18:
1.1.2.2 misho 19: # It's UBOOT, not Redboot - without this, things will hang at startup
1.1.2.9 misho 20: options AR71XX_ENV_UBOOT
1.1.2.10 misho 21: options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
1.1.2.12 misho 22: options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
23: device firmware # Used by the above
1.1.2.1 misho 24:
1.1.2.10 misho 25: device etherswitch
26: device arswitch
1.1.2.1 misho 27:
1.1.2.4 misho 28: hints "ELWIX_ALFA_N2.hints"
1.1.2.2 misho 29: include "../atheros/std.ar71xx"
1.1.2.1 misho 30:
31: makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
32: #makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci hwpmc cam zlib"
33:
1.1.2.7 misho 34: #options DDB
1.1.2.1 misho 35: #options KDB
36:
1.1.2.16! misho 37: options PREEMPTION # Enable kernel thread preemption
! 38: options SCHED_ULE # ULE scheduler
! 39: #options SCHED_4BSD #4BSD scheduler
1.1.2.1 misho 40: options INET #InterNETworking
1.1.2.6 misho 41: options INET6
1.1.2.1 misho 42: options PSEUDOFS #Pseudo-filesystem framework
43: options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
1.1.2.2 misho 44: options ALQ
1.1.2.1 misho 45:
46: # Debugging for use in -current
1.1.2.2 misho 47: #options DEADLKRES
1.1.2.1 misho 48: #options INVARIANTS
49: #options INVARIANT_SUPPORT
50: #options WITNESS
51: #options WITNESS_SKIPSPIN
1.1.2.15 misho 52:
53: # Don't include the SCSI/CAM strings in the default build
54: options SCSI_NO_SENSE_STRINGS
55: options SCSI_NO_OP_STRINGS
56:
1.1.2.1 misho 57: options FFS #Berkeley Fast Filesystem
1.1.2.15 misho 58: options NO_FFS_SNAPSHOT
1.1.2.2 misho 59: #options SOFTUPDATES #Enable FFS soft updates support
60: #options UFS_ACL #Support for access control lists
61: #options UFS_DIRHASH #Improve performance on big directories
1.1.2.1 misho 62:
1.1.2.2 misho 63: # Support uncompress lzma rootfs
64: device geom_uncompress
65: options GEOM_UNCOMPRESS
1.1.2.12 misho 66: options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
1.1.2.2 misho 67:
68: # PCI bus
1.1.2.1 misho 69: device pci
70: device ar724x_pci
71:
1.1.2.2 misho 72: # NVRAM U-Boot Environment -> Kernel environment
73: device nvram2env
74:
1.1.2.12 misho 75: options NFSCL # New Network Filesystem Client
1.1.2.1 misho 76: #options NFSD # New Network Filesystem Server
1.1.2.12 misho 77: options NFSCLIENT #Network File System client
1.1.2.1 misho 78: #options NFSSERVER #Network File System server
1.1.2.12 misho 79: options NFSLOCKD # Network Lock Manager
80: options NFS_ROOT # NFS usable as /, requires NFSCL
1.1.2.1 misho 81: #options BOOTP # Use BOOTP to obtain IP address/hostname
82: # Requires NFSCLIENT and NFS_ROOT
83: #options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
84: #options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
85: #options BOOTP_COMPAT # Workaround for broken bootp daemons.
86: #options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
87:
1.1.2.13 misho 88: options GEOM_LABEL # Provides labelization
1.1.2.1 misho 89: options GEOM_UZIP
1.1.2.13 misho 90: device geom_uzip # compressed in-memory filesystem support
1.1.2.1 misho 91:
1.1.2.2 misho 92: # Wireless NIC cards
1.1.2.1 misho 93: options IEEE80211_DEBUG
94: options IEEE80211_SUPPORT_MESH
95: options IEEE80211_SUPPORT_SUPERG
96: options IEEE80211_AMPDU_AGE
1.1.2.2 misho 97: options IEEE80211_SUPPORT_TDMA
98: options IEEE80211_ALQ
1.1.2.1 misho 99: device wlan # 802.11 support
100: device wlan_wep # 802.11 WEP support
101: device wlan_ccmp # 802.11 CCMP support
102: device wlan_tkip # 802.11 TKIP support
103: device wlan_xauth # 802.11 hostap support
104: device wlan_acl
105: device wlan_amrr
106: device wlan_rssadapt
107:
108: # Atheros wireless NICs
109: device ath # Atheros interface support
110: device ath_pci # Atheros PCI/Cardbus bus
111: device ath_ahb
112: options ATH_DEBUG
113: options ATH_ENABLE_11N
1.1.2.2 misho 114: options ATH_DIAGAPI
115:
1.1.2.6 misho 116: device ath_hal
1.1.2.2 misho 117: options AH_SUPPORT_AR5416
1.1.2.1 misho 118: options AH_DEBUG
119: options AH_DEBUG_ALQ
1.1.2.2 misho 120:
1.1.2.1 misho 121: #option AH_SUPPORT_AR9130 # Makes other chipsets not function!
122: device ath_rate_sample
1.1.2.9 misho 123: options AH_RXCFG_SDMAMW_4BYTES
1.1.2.7 misho 124: options AH_AR5416_INTERRUPT_MITIGATION
1.1.2.1 misho 125: # There's no DFS radar detection support yet so this won't actually
126: # detect radars. It however does enable the rest of the channel change
127: # machinery so DFS can be debugged.
128: #option ATH_ENABLE_DFS
129:
130: device mii
131: device arge
1.1.2.2 misho 132: #options ARGE_DEBUG # Enable if_arge debugging for now
1.1.2.10 misho 133: options ARGE_MDIO # Export an MDIO bus separate from arge
134: device miiproxy # MDIO bus <-> MII PHY rendezvous
1.1.2.1 misho 135:
1.1.2.6 misho 136: # USB devices - PB92 has EHCI only
137:
1.1.2.14 misho 138: #device usb
1.1.2.15 misho 139: options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
140: #options USB_DEBUG
141: options USB_HOST_ALIGN=32
1.1.2.14 misho 142: #device ehci
1.1.2.1 misho 143:
1.1.2.2 misho 144: # Mass storage
1.1.2.16! misho 145: #device scbus
1.1.2.14 misho 146: #device umass
1.1.2.16! misho 147: #device da
1.1.2.1 misho 148:
1.1.2.2 misho 149: # Read MSDOS formatted disks
1.1.2.6 misho 150: options GEOM_PART_BSD
151: options GEOM_PART_MBR
1.1.2.13 misho 152:
1.1.2.14 misho 153: options NULLFS
154: options UNIONFS
155: #options TMPFS
156: #options MSDOSFS
1.1.2.2 misho 157:
158: # GPIO Bus
159: device gpio
160: device gpioled
161:
162: # SPI and flash
1.1.2.1 misho 163: device spibus
164: device ar71xx_spi
165: device mx25l
1.1.2.2 misho 166:
167: # The flash is statically partitioned; add in that
168: device geom_map
169:
1.1.2.1 misho 170: device ar71xx_wdog
171:
1.1.2.2 misho 172: # Serial
1.1.2.1 misho 173: device uart
1.1.2.7 misho 174: device uart_ar71xx
175:
1.1.2.2 misho 176: # Network twiddling
1.1.2.1 misho 177: device loop
178: device ether
1.1.2.14 misho 179: device vlan
1.1.2.1 misho 180: device md
181: device bpf
182: device random
183: device if_bridge
184: device gif # ip[46] in ip[46] tunneling protocol
1.1.2.2 misho 185: device gre # generic encapsulation - only for IPv4 in IPv4 though atm
1.1.2.15 misho 186: device tun
187: device tap
188:
189: device pf
190: device pflog
191: device pfsync
192:
193: options P1003_1B_MQUEUE
194: options P1003_1B_SEMAPHORES # POSIX-style semaphores
195: options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
1.1.2.7 misho 196:
1.1.2.12 misho 197: options MSGBUF_SIZE=65536
198: options SHMALL=128
199: options NSFBUFS=1024
200: options MAXFILES=512
201: options MAXUSERS=3
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to ELWIX_ALFA_N2 CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config