Return to lighttpd.conf.sample CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

ELWIX project

    1: # lighttpd configuration file
    2: #
    3: # use it as a base for lighttpd 1.0.0 and above
    4: #
    5: # $Id: lighttpd.conf.sample,v 1.1.1.1 2011/07/05 23:43:00 misho Exp $
    6: 
    7: ############ Options you really have to take care of ####################
    8: 
    9: ## modules to load
   10: # at least mod_access and mod_accesslog should be loaded
   11: # all other module should only be loaded if really neccesary
   12: # - saves some time
   13: # - saves memory
   14: server.modules              = (
   15: #                               "mod_rewrite",
   16: #                               "mod_redirect",
   17: #                               "mod_alias",
   18:                                 "mod_access",
   19: #                               "mod_trigger_b4_dl",
   20: #                               "mod_auth",
   21: #                               "mod_status",
   22: #                               "mod_setenv",
   23: #                               "mod_fastcgi",
   24: #                               "mod_proxy",
   25: #                               "mod_simple_vhost",
   26: #                               "mod_evhost",
   27: #                               "mod_userdir",
   28: #                               "mod_cgi",
   29: #                               "mod_compress",
   30: #                               "mod_ssi",
   31: #                               "mod_usertrack",
   32: #                               "mod_expire",
   33: #                               "mod_secdownload",
   34: #                               "mod_rrdtool",
   35:                                 "mod_accesslog" )
   36: 
   37: ## A static document-root. For virtual hosting take a look at the
   38: ## mod_simple_vhost module.
   39: server.document-root        = "/usr/local/www/data/"
   40: 
   41: ## where to send error-messages to
   42: server.errorlog             = "/var/log/lighttpd.error.log"
   43: 
   44: # files to check for if .../ is requested
   45: index-file.names            = ( "index.php", "index.html",
   46:                                 "index.htm", "default.htm" )
   47: 
   48: ## set the event-handler (read the performance section in the manual)
   49: server.event-handler = "freebsd-kqueue" # needed on OS X
   50: 
   51: # mimetype mapping
   52: mimetype.assign             = (
   53:   ".pdf"          =>      "application/pdf",
   54:   ".sig"          =>      "application/pgp-signature",
   55:   ".spl"          =>      "application/futuresplash",
   56:   ".class"        =>      "application/octet-stream",
   57:   ".ps"           =>      "application/postscript",
   58:   ".torrent"      =>      "application/x-bittorrent",
   59:   ".dvi"          =>      "application/x-dvi",
   60:   ".gz"           =>      "application/x-gzip",
   61:   ".pac"          =>      "application/x-ns-proxy-autoconfig",
   62:   ".swf"          =>      "application/x-shockwave-flash",
   63:   ".tar.gz"       =>      "application/x-tgz",
   64:   ".tgz"          =>      "application/x-tgz",
   65:   ".tar"          =>      "application/x-tar",
   66:   ".zip"          =>      "application/zip",
   67:   ".mp3"          =>      "audio/mpeg",
   68:   ".m3u"          =>      "audio/x-mpegurl",
   69:   ".wma"          =>      "audio/x-ms-wma",
   70:   ".wax"          =>      "audio/x-ms-wax",
   71:   ".ogg"          =>      "application/ogg",
   72:   ".wav"          =>      "audio/x-wav",
   73:   ".gif"          =>      "image/gif",
   74:   ".jar"          =>      "application/x-java-archive",
   75:   ".jpg"          =>      "image/jpeg",
   76:   ".jpeg"         =>      "image/jpeg",
   77:   ".png"          =>      "image/png",
   78:   ".xbm"          =>      "image/x-xbitmap",
   79:   ".xpm"          =>      "image/x-xpixmap",
   80:   ".xwd"          =>      "image/x-xwindowdump",
   81:   ".css"          =>      "text/css",
   82:   ".html"         =>      "text/html",
   83:   ".htm"          =>      "text/html",
   84:   ".js"           =>      "text/javascript",
   85:   ".asc"          =>      "text/plain",
   86:   ".c"            =>      "text/plain",
   87:   ".cpp"          =>      "text/plain",
   88:   ".log"          =>      "text/plain",
   89:   ".conf"         =>      "text/plain",
   90:   ".text"         =>      "text/plain",
   91:   ".txt"          =>      "text/plain",
   92:   ".dtd"          =>      "text/xml",
   93:   ".xml"          =>      "text/xml",
   94:   ".mpeg"         =>      "video/mpeg",
   95:   ".mpg"          =>      "video/mpeg",
   96:   ".mov"          =>      "video/quicktime",
   97:   ".qt"           =>      "video/quicktime",
   98:   ".avi"          =>      "video/x-msvideo",
   99:   ".asf"          =>      "video/x-ms-asf",
  100:   ".asx"          =>      "video/x-ms-asf",
  101:   ".wmv"          =>      "video/x-ms-wmv",
  102:   ".bz2"          =>      "application/x-bzip",
  103:   ".tbz"          =>      "application/x-bzip-compressed-tar",
  104:   ".tar.bz2"      =>      "application/x-bzip-compressed-tar",
  105:   # default mime type
  106:   ""              =>      "application/octet-stream",
  107:  )
  108: 
  109: # Use the "Content-Type" extended attribute to obtain mime type if possible
  110: #mimetype.use-xattr        = "enable"
  111: 
  112: 
  113: ## send a different Server: header
  114: ## be nice and keep it at lighttpd
  115: # server.tag                 = "lighttpd"
  116: 
  117: #### accesslog module
  118: accesslog.filename          = "/var/log/lighttpd.access.log"
  119: 
  120: ## deny access the file-extensions
  121: #
  122: # ~    is for backupfiles from vi, emacs, joe, ...
  123: # .inc is often used for code includes which should in general not be part
  124: #      of the document-root
  125: url.access-deny             = ( "~", ".inc" )
  126: 
  127: $HTTP["url"] =~ "\.pdf$" {
  128:   server.range-requests = "disable"
  129: }
  130: 
  131: ##
  132: # which extensions should not be handle via static-file transfer
  133: #
  134: # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
  135: static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
  136: 
  137: ######### Options that are good to be but not neccesary to be changed #######
  138: 
  139: ## bind to port (default: 80)
  140: #server.port                = 81
  141: 
  142: ## bind to localhost (default: all interfaces)
  143: #server.bind                = "127.0.0.1"
  144: 
  145: ## error-handler for status 404
  146: #server.error-handler-404   = "/error-handler.html"
  147: #server.error-handler-404   = "/error-handler.php"
  148: 
  149: ## to help the rc.scripts
  150: server.pid-file            = "/var/run/lighttpd.pid"
  151: 
  152: 
  153: ###### virtual hosts
  154: ##
  155: ##  If you want name-based virtual hosting add the next three settings and load
  156: ##  mod_simple_vhost
  157: ##
  158: ## document-root =
  159: ##   virtual-server-root + virtual-server-default-host + virtual-server-docroot
  160: ## or
  161: ##   virtual-server-root + http-host + virtual-server-docroot
  162: ##
  163: #simple-vhost.server-root   = "/srv/www/vhosts/"
  164: #simple-vhost.default-host  = "www.example.org"
  165: #simple-vhost.document-root = "/htdocs/"
  166: 
  167: 
  168: ##
  169: ## Format: <errorfile-prefix><status-code>.html
  170: ## -> ..../status-404.html for 'File not found'
  171: #server.errorfile-prefix    = "/usr/share/lighttpd/errors/status-"
  172: #server.errorfile-prefix    = "/srv/www/errors/status-"
  173: 
  174: ## virtual directory listings
  175: #dir-listing.activate       = "enable"
  176: ## select encoding for directory listings
  177: #dir-listing.encoding        = "utf-8"
  178: 
  179: ## enable debugging
  180: #debug.log-request-header   = "enable"
  181: #debug.log-response-header  = "enable"
  182: #debug.log-request-handling = "enable"
  183: #debug.log-file-not-found   = "enable"
  184: 
  185: ### only root can use these options
  186: #
  187: # chroot() to directory (default: no chroot() )
  188: #server.chroot              = "/"
  189: 
  190: ## change uid to <uid> (default: don't care)
  191: server.username            = "www"
  192: 
  193: ## change uid to <uid> (default: don't care)
  194: server.groupname           = "www"
  195: 
  196: #### compress module
  197: #compress.cache-dir         = "/var/cache/lighttpd/compress/"
  198: #compress.filetype          = ("text/plain", "text/html")
  199: 
  200: #### proxy module
  201: ## read proxy.txt for more info
  202: #proxy.server               = ( ".php" =>
  203: #                               ( "localhost" =>
  204: #                                 (
  205: #                                   "host" => "192.168.0.101",
  206: #                                   "port" => 80
  207: #                                 )
  208: #                               )
  209: #                             )
  210: 
  211: #### fastcgi module
  212: ## read fastcgi.txt for more info
  213: ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
  214: #fastcgi.server             = ( ".php" =>
  215: #                               ( "localhost" =>
  216: #                                 (
  217: #                                   "socket" => "/var/run/lighttpd/php-fastcgi.socket",
  218: #                                   "bin-path" => "/usr/local/bin/php-cgi-cgi"
  219: #                                 )
  220: #                               )
  221: #                            )
  222: 
  223: #### CGI module
  224: #cgi.assign                 = ( ".pl"  => "/usr/bin/perl",
  225: #                               ".cgi" => "/usr/bin/perl" )
  226: #
  227: 
  228: #### SSL engine
  229: #ssl.engine                 = "enable"
  230: #ssl.pemfile                = "/etc/ssl/private/lighttpd.pem"
  231: 
  232: #### status module
  233: #status.status-url          = "/server-status"
  234: #status.config-url          = "/server-config"
  235: 
  236: #### auth module
  237: ## read authentication.txt for more info
  238: #auth.backend               = "plain"
  239: #auth.backend.plain.userfile = "lighttpd.user"
  240: #auth.backend.plain.groupfile = "lighttpd.group"
  241: 
  242: #auth.backend.ldap.hostname = "localhost"
  243: #auth.backend.ldap.base-dn  = "dc=my-domain,dc=com"
  244: #auth.backend.ldap.filter   = "(uid=$)"
  245: 
  246: #auth.require               = ( "/server-status" =>
  247: #                               (
  248: #                                 "method"  => "digest",
  249: #                                 "realm"   => "download archiv",
  250: #                                 "require" => "user=jan"
  251: #                               ),
  252: #                               "/server-config" =>
  253: #                               (
  254: #                                 "method"  => "digest",
  255: #                                 "realm"   => "download archiv",
  256: #                                 "require" => "valid-user"
  257: #                               )
  258: #                             )
  259: 
  260: #### url handling modules (rewrite, redirect, access)
  261: #url.rewrite                = ( "^/$"             => "/server-status" )
  262: #url.redirect               = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
  263: #### both rewrite/redirect support back reference to regex conditional using %n
  264: #$HTTP["host"] =~ "^www\.(.*)" {
  265: #  url.redirect            = ( "^/(.*)" => "http://%1/$1" )
  266: #}
  267: 
  268: #
  269: # define a pattern for the host url finding
  270: # %% => % sign
  271: # %0 => domain name + tld
  272: # %1 => tld
  273: # %2 => domain name without tld
  274: # %3 => subdomain 1 name
  275: # %4 => subdomain 2 name
  276: #
  277: #evhost.path-pattern        = "/srv/www/vhosts/%3/htdocs/"
  278: 
  279: #### expire module
  280: #expire.url                 = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
  281: 
  282: #### ssi
  283: #ssi.extension              = ( ".shtml" )
  284: 
  285: #### rrdtool
  286: #rrdtool.binary             = "/usr/bin/rrdtool"
  287: #rrdtool.db-name            = "/var/lib/lighttpd/lighttpd.rrd"
  288: 
  289: #### setenv
  290: #setenv.add-request-header  = ( "TRAV_ENV" => "mysql://user@host/db" )
  291: #setenv.add-response-header = ( "X-Secret-Message" => "42" )
  292: 
  293: ## for mod_trigger_b4_dl
  294: # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
  295: # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
  296: # trigger-before-download.trigger-url = "^/trigger/"
  297: # trigger-before-download.download-url = "^/download/"
  298: # trigger-before-download.deny-url = "http://127.0.0.1/index.html"
  299: # trigger-before-download.trigger-timeout = 10
  300: 
  301: #### variable usage:
  302: ## variable name without "." is auto prefixed by "var." and becomes "var.bar"
  303: #bar = 1
  304: #var.mystring = "foo"
  305: 
  306: ## integer add
  307: #bar += 1
  308: ## string concat, with integer cast as string, result: "www.foo1.com"
  309: #server.name = "www." + mystring + var.bar + ".com"
  310: ## array merge
  311: #index-file.names = (foo + ".php") + index-file.names
  312: #index-file.names += (foo + ".php")
  313: 
  314: #### include
  315: #include /etc/lighttpd/lighttpd-inc.conf
  316: ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
  317: #include "lighttpd-inc.conf"
  318: 
  319: #### include_shell
  320: #include_shell "echo var.a=1"
  321: ## the above is same as:
  322: #var.a=1
  323: 
  324: # Enable IPV6 and IPV4 together
  325: server.use-ipv6 = "enable"
  326: $SERVER["socket"] == "0.0.0.0:80" { }