Return to smartd.conf.sample CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

Annotation of elwix/config/etc/default/smartd.conf.sample, revision 1.1.1.1

1.1       misho       1: # Sample configuration file for smartd.  See man smartd.conf.
                      2: 
                      3: # Home page is: http://smartmontools.sourceforge.net
                      4: 
                      5: # $Id: smartd.conf.sample,v 1.1.2.1 2010/05/08 00:00:13 misho Exp $
                      6: 
                      7: # smartd will re-read the configuration file if it receives a HUP
                      8: # signal
                      9: 
                     10: # The file gives a list of devices to monitor using smartd, with one
                     11: # device per line. Text after a hash (#) is ignored, and you may use
                     12: # spaces and tabs for white space. You may use '\' to continue lines.
                     13: 
                     14: # You can usually identify which hard disks are on your system by
                     15: # looking in /proc/ide and in /proc/scsi.
                     16: 
                     17: # The word DEVICESCAN will cause any remaining lines in this
                     18: # configuration file to be ignored: it tells smartd to scan for all
                     19: # ATA and SCSI devices.  DEVICESCAN may be followed by any of the
                     20: # Directives listed below, which will be applied to all devices that
                     21: # are found.  Most users should comment out DEVICESCAN and explicitly
                     22: # list the devices that they wish to monitor.
                     23: DEVICESCAN
                     24: 
                     25: # Alternative setting to ignore temperature and power-on hours reports
                     26: # in syslog.
                     27: #DEVICESCAN -I 194 -I 231 -I 9
                     28: 
                     29: # Alternative setting to report more useful raw temperature in syslog.
                     30: #DEVICESCAN -R 194 -R 231 -I 9
                     31: 
                     32: # Alternative setting to report raw temperature changes >= 5 Celsius
                     33: # and min/max temperatures.
                     34: #DEVICESCAN -I 194 -I 231 -I 9 -W 5
                     35: 
                     36: # First (primary) ATA/IDE hard disk.  Monitor all attributes, enable
                     37: # automatic online data collection, automatic Attribute autosave, and
                     38: # start a short self-test every day between 2-3am, and a long self test
                     39: # Saturdays between 3-4am.
                     40: #/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
                     41: 
                     42: # Monitor SMART status, ATA Error Log, Self-test log, and track
                     43: # changes in all attributes except for attribute 194
                     44: #/dev/hdb -H -l error -l selftest -t -I 194 
                     45: 
                     46: # Monitor all attributes except normalized Temperature (usually 194),
                     47: # but track Temperature changes >= 4 Celsius, report Temperatures
                     48: # >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
                     49: # Send mail on SMART failures or when Temperature is >= 55 Celsius.
                     50: #/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
                     51: 
                     52: # An ATA disk may appear as a SCSI device to the OS. If a SCSI to
                     53: # ATA Translation (SAT) layer is between the OS and the device then
                     54: # this can be flagged with the '-d sat' option. This situation may
                     55: # become common with SATA disks in SAS and FC environments.
                     56: # /dev/sda -a -d sat
                     57: 
                     58: # A very silent check.  Only report SMART health status if it fails
                     59: # But send an email in this case
                     60: #/dev/hdc -H -C 0 -U 0 -m admin@example.com
                     61: 
                     62: # First two SCSI disks.  This will monitor everything that smartd can
                     63: # monitor.  Start extended self-tests Wednesdays between 6-7pm and
                     64: # Sundays between 1-2 am
                     65: #/dev/sda -d scsi -s L/../../3/18
                     66: #/dev/sdb -d scsi -s L/../../7/01
                     67: 
                     68: # Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
                     69: # the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4, 
                     70: # and 4-5 am.
                     71: # NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
                     72: # is DEPRECATED.  Use the /dev/tweN character device interface instead.
                     73: # For example /dev/twe0, /dev/twe1, and so on.
                     74: #/dev/sdc -d 3ware,0 -a -s L/../../7/01
                     75: #/dev/sdc -d 3ware,1 -a -s L/../../7/02
                     76: #/dev/sdc -d 3ware,2 -a -s L/../../7/03
                     77: #/dev/sdc -d 3ware,3 -a -s L/../../7/04
                     78: 
                     79: # Monitor 2 ATA disks connected to a 3ware 9000 controller which uses
                     80: # the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
                     81: # between 1-2 and 3-4 am.
                     82: #/dev/twa0 -d 3ware,0 -a -s L/../../2/01
                     83: #/dev/twa0 -d 3ware,1 -a -s L/../../2/03
                     84: 
                     85: # Same as above for Windows. Option '-d 3ware,N' is not necessary,
                     86: # disk (port) number is specified in device name.
                     87: # NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
                     88: #/dev/hdc,0 -a -s L/../../2/01
                     89: #/dev/hdc,1 -a -s L/../../2/03
                     90: 
                     91: # Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
                     92: # self-tests Sundays between 1-2, 2-3, and 3-4 am. 
                     93: #/dev/sdd -d hpt,1/1 -a -s L/../../7/01
                     94: #/dev/sdd -d hpt,1/2 -a -s L/../../7/02
                     95: #/dev/sdd -d hpt,1/3 -a -s L/../../7/03
                     96: 
                     97: # Monitor 2 ATA disks connected to the same PMPort which connected to the
                     98: # HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
                     99: #/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
                    100: #/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
                    101: 
                    102: # HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
                    103: # PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
                    104: #
                    105: #   -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
                    106: #   -T TYPE set the tolerance to one of: normal, permissive
                    107: #   -o VAL  Enable/disable automatic offline tests (on/off)
                    108: #   -S VAL  Enable/disable attribute autosave (on/off)
                    109: #   -n MODE No check. MODE is one of: never, sleep, standby, idle
                    110: #   -H      Monitor SMART Health Status, report if failed
                    111: #   -l TYPE Monitor SMART log.  Type is one of: error, selftest
                    112: #   -f      Monitor for failure of any 'Usage' Attributes
                    113: #   -m ADD  Send warning email to ADD for -H, -l error, -l selftest, and -f
                    114: #   -M TYPE Modify email warning behavior (see man page)
                    115: #   -s REGE Start self-test when type/date matches regular expression (see man page)
                    116: #   -p      Report changes in 'Prefailure' Normalized Attributes
                    117: #   -u      Report changes in 'Usage' Normalized Attributes
                    118: #   -t      Equivalent to -p and -u Directives
                    119: #   -r ID   Also report Raw values of Attribute ID with -p, -u or -t
                    120: #   -R ID   Track changes in Attribute ID Raw value with -p, -u or -t
                    121: #   -i ID   Ignore Attribute ID for -f Directive
                    122: #   -I ID   Ignore Attribute ID for -p, -u or -t Directive
                    123: #   -C ID   Report if Current Pending Sector count non-zero
                    124: #   -U ID   Report if Offline Uncorrectable count non-zero
                    125: #   -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
                    126: #   -v N,ST Modifies labeling of Attribute N (see man page)
                    127: #   -a      Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
                    128: #   -F TYPE Use firmware bug workaround. Type is one of: none, samsung
                    129: #   -P TYPE Drive-specific presets: use, ignore, show, showall
                    130: #    #      Comment: text after a hash sign is ignored
                    131: #    \      Line continuation character
                    132: # Attribute ID is a decimal integer 1 <= ID <= 255
                    133: # except for -C and -U, where ID = 0 turns them off.
                    134: # All but -d, -m and -M Directives are only implemented for ATA devices
                    135: #
                    136: # If the test string DEVICESCAN is the first uncommented text
                    137: # then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
                    138: # DEVICESCAN may be followed by any desired Directives.