[BACK]Return to bird.conf CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

Diff for /elwix/config/etc/default/bird.conf between versions 1.1 and 1.2

version 1.1, 2017/08/22 14:36:56 version 1.2, 2021/03/11 13:59:50
Line 0 Line 1
   # This is a basic configuration file, which contains boilerplate options and
   # some basic examples. It allows the BIRD daemon to start but will not cause
   # anything else to happen.
   #
   # Please refer to the BIRD User's Guide documentation, which is also available
   # online at http://bird.network.cz/ in HTML format, for more information on
   # configuring BIRD and adding routing protocols.
   
   # Configure logging
   log syslog all;
   # log "/var/log/bird.log" { debug, trace, info, remote, warning, error, auth, fatal, bug };
   
   # Set router ID. It is a unique identification of your router, usually one of
   # IPv4 addresses of the router. It is recommended to configure it explicitly.
   # router id 198.51.100.1;
   
   # Turn on global debugging of all protocols (all messages or just selected classes)
   # debug protocols all;
   # debug protocols { events, states };
   
   # Turn on internal watchdog
   # watchdog warning 5 s;
   # watchdog timeout 30 s;
   
   # You can define your own constants
   # define my_asn = 65000;
   # define my_addr = 198.51.100.1;
   
   # Tables master4 and master6 are defined by default
   # ipv4 table master4;
   # ipv6 table master6;
   
   # Define more tables, e.g. for policy routing or as MRIB
   # ipv4 table mrib4;
   # ipv6 table mrib6;
   
   # The Device protocol is not a real routing protocol. It does not generate any
   # routes and it only serves as a module for getting information about network
   # interfaces from the kernel. It is necessary in almost any configuration.
   protocol device {
   }
   
   # The direct protocol is not a real routing protocol. It automatically generates
   # direct routes to all network interfaces. Can exist in as many instances as you
   # wish if you want to populate multiple routing tables with direct routes.
   protocol direct {
           disabled;               # Disable by default
           ipv4;                   # Connect to default IPv4 table
           ipv6;                   # ... and to default IPv6 table
   }
   
   # The Kernel protocol is not a real routing protocol. Instead of communicating
   # with other routers in the network, it performs synchronization of BIRD
   # routing tables with the OS kernel. One instance per table.
   protocol kernel {
           ipv4 {                  # Connect protocol to IPv4 table by channel
   #             table master4;    # Default IPv4 table is master4
   #             import all;       # Import to table, default is import all
                 export all;       # Export to protocol. default is export none
           };
   #       learn;                  # Learn alien routes from the kernel
   #       kernel table 10;        # Kernel table to synchronize with (default: main)
   }
   
   # Another instance for IPv6, skipping default options
   protocol kernel {
           ipv6 { export all; };
   }
   
   # Static routes (Again, there can be multiple instances, for different address
   # families and to disable/enable various groups of static routes on the fly).
   protocol static {
           ipv4;                   # Again, IPv4 channel with default options
   
   #       route 0.0.0.0/0 via 198.51.100.10;
   #       route 192.0.2.0/24 blackhole;
   #       route 10.0.0.0/8 unreachable;
   #       route 10.2.0.0/24 via "eth0";
   #       # Static routes can be defined with optional attributes
   #       route 10.1.1.0/24 via 198.51.100.3 { rip_metric = 3; };
   #       route 10.1.2.0/24 via 198.51.100.3 { ospf_metric1 = 100; };
   #       route 10.1.3.0/24 via 198.51.100.4 { ospf_metric2 = 100; };
   }
   
   # Pipe protocol connects two routing tables. Beware of loops.
   # protocol pipe {
   #       table master4;          # No ipv4/ipv6 channel definition like in other protocols
   #       peer table mrib4;
   #       import all;             # Direction peer table -> table
   #       export all;             # Direction table -> peer table
   # }
   
   # RIP example, both RIP and RIPng are supported
   # protocol rip {
   #       ipv4 {
   #               # Export direct, static routes and ones from RIP itself
   #               import all;
   #               export where source ~ [ RTS_DEVICE, RTS_STATIC, RTS_RIP ];
   #       };
   #       interface "eth*" {
   #               update time 10;                 # Default period is 30
   #               timeout time 60;                # Default timeout is 180
   #               authentication cryptographic;   # No authentication by default
   #               password "hello" { algorithm hmac sha256; }; # Default is MD5
   #       };
   # }
   
   # OSPF example, both OSPFv2 and OSPFv3 are supported
   # protocol ospf v3 {
   #       ipv6 {
   #               import all;
   #               export where source = RTS_STATIC;
   #       };
   #       area 0 {
   #               interface "eth*" {
   #                       type broadcast;         # Detected by default
   #                       cost 10;                # Interface metric
   #                       hello 5;                # Default hello perid 10 is too long
   #               };
   #               interface "tun*" {
   #                       type ptp;               # PtP mode, avoids DR selection
   #                       cost 100;               # Interface metric
   #                       hello 5;                # Default hello perid 10 is too long
   #               };
   #               interface "dummy0" {
   #                       stub;                   # Stub interface, just propagate it
   #               };
   #       };
   #}
   
   # Define simple filter as an example for BGP import filter
   # See https://gitlab.labs.nic.cz/labs/bird/wikis/BGP_filtering for more examples
   # filter rt_import
   # {
   #       if bgp_path.first != 64496 then accept;
   #       if bgp_path.len > 64 then accept;
   #       if bgp_next_hop != from then accept;
   #       reject;
   # }
   
   # BGP example, explicit name 'uplink1' is used instead of default 'bgp1'
   # protocol bgp uplink1 {
   #       description "My BGP uplink";
   #       local 198.51.100.1 as 65000;
   #       neighbor 198.51.100.10 as 64496;
   #       hold time 90;           # Default is 240
   #       password "secret";      # Password used for MD5 authentication
   #
   #       ipv4 {                  # regular IPv4 unicast (1/1)
   #               import filter rt_import;
   #               export where source ~ [ RTS_STATIC, RTS_BGP ];
   #       };
   #
   #       ipv6 {                  # regular IPv6 unicast (2/1)
   #               import filter rt_import;
   #               export filter { # The same as 'where' expression above
   #                       if source ~ [ RTS_STATIC, RTS_BGP ]
   #                       then accept;
   #                       else reject;
   #               };
   #       };
   #
   #       ipv4 multicast {        # IPv4 multicast topology (1/2)
   #               table mrib4;    # explicit IPv4 table
   #               import filter rt_import;
   #               export all;
   #       };
   #
   #       ipv6 multicast {        # IPv6 multicast topology (2/2)
   #               table mrib6;    # explicit IPv6 table
   #               import filter rt_import;
   #               export all;
   #       };
   #}
   
   # Template example. Using templates to define IBGP route reflector clients.
   # template bgp rr_clients {
   #       local 10.0.0.1 as 65000;
   #       neighbor as 65000;
   #       rr client;
   #       rr cluster id 1.0.0.1;
   #
   #       ipv4 {
   #               import all;
   #               export where source = RTS_BGP;
   #       };
   #
   #       ipv6 {
   #               import all;
   #               export where source = RTS_BGP;
   #       };
   # }
   #
   # protocol bgp client1 from rr_clients {
   #       neighbor 10.0.1.1;
   # }
   #
   # protocol bgp client2 from rr_clients {
   #       neighbor 10.0.2.1;
   # }
   #
   # protocol bgp client3 from rr_clients {
   #       neighbor 10.0.3.1;
   # }
Removed from v.1.1  
changed lines
  Added in v.1.2

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>