Return to conserver.cf CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

ELWIX project

#
# Sample conserver.cf file, to give you ideas of what you can do with
# the various configuration items.
#

### set up global access
default full	{ rw *; }

### define some terminal server specifics
# we set portbase and portinc so we can reference the ports in a
# physical representation and let conserver do the math to figure
# out the actual socket address
default cisco	{ type host; portbase 2000; portinc 1; }
default xyplex	{ type host; portbase 2000; portinc 100; }
default iolan	{ type host; portbase 10000; portinc 1; }

### set up some custom break sequences
break 4 { string "+\d+\d+"; delay 300; }
break 5 { string "\033c"; }

### set the defaults for all the consoles
# these get applied before anything else
default * {
	# The '&' character is substituted with the console name
	logfile /var/consoles/&;
	# timestamps every hour with activity and break logging
	timestamp 1hab;
	# include the 'full' default
	include full;
	# master server is localhost
	master localhost;
}

### define the first terminal server
default ts1.conserver.com {
	# use the xyplex defaults
	include xyplex;
	# host to connect to is ts1.conserver.com
	host ts1.conserver.com;
	# run login-xyplex when connecting to the term server
	initcmd /usr/local/sbin/login-xyplex;
}

# now define the consoles on ts1.conserver.com
# bryan isn't allowed on web1.conserver.com
console web1.conserver.com { include ts1.conserver.com; port 2; rw !bryan; }
console ns1.conserver.com { include ts1.conserver.com; port 10; }
console ns2.conserver.com { include ts1.conserver.com; port 8; }

### define the second terminal server
# this one is a cisco, with simple socket connections
default ts2.conserver.com { include cisco; host ts2.conserver.com; }

# and the consoles on ts2.conserver.com
console ldap1.conserver.com { include ts2.conserver.com; port 7; }

### and now some one-off consoles
# we still inherit the '*' default set
# a simple ssh invocation
console ssh {
	type exec;
	exec ssh localhost;
	# provide a 'message-of-the-day'
	motd "just a simple ssh to localhost";
}

# connect to /dev/ttya
console ttya {
	type device;
	device /dev/ttya; parity none; baud 9600;
	idlestring "#";
	idletimeout 5m;		# send a '#' every 5 minutes of idle
	timestamp "";		# no timestamps on this console
}

### define a group of users
group sysadmin {
    users bryan, todd;
    users dave;
}

### reset the defaults for the next set of consoles
# again, these get applied before anything else
default * {
	# The '&' character is substituted with the console name
	logfile /var/consoles/&;
	timestamp 5m;
	rw sysadmin;  # use the group defined above
	master localhost;
}

default cyclades {
	# sets up /dev/ttyC0 through /dev/ttyC31, for a 32 port card
	# referenced as ports 1 through 32
	type device;
	device /dev/ttyC.;
	devicesubst .=Pd;
	portbase -1;
	portinc 1;
	host none; # not really used, since devicesubst doesn't use it
	baud 9600;
	parity none;
}

console modem1.conserver.com { include cyclades; port 2; break 4; }
# todd isn't allowed on modem2.conserver.com
console modem2.conserver.com { include cyclades; port 6; rw !todd; }

### list of clients we allow
access * {
	allowed 10.0.0.0/8 192.168.0.0/16;
	allowed cs1.conserver.com cs2.conserver.com cs3.conserver.com;
	trusted 127.0.0.1;
}