Annotation of elwix/config/etc/default/gettytab, revision 1.2
1.2 ! misho 1: # $FreeBSD: src/etc/gettytab,v 1.29 2012/11/17 01:49:01 svnexp Exp $
1.1 misho 2: # from: @(#)gettytab 5.14 (Berkeley) 3/27/91
3: #
4: # Most of the table entries here are just copies of the old getty table,
5: # it is by no means certain, or even likely, that any of them are optimal
6: # for any purpose whatever. Nor is it likely that more than a couple are
7: # even correct.
8: #
9: # The default gettytab entry, used to set defaults for all other
10: # entries, and in cases where getty is called with no table name.
11: #
12: # cb, ce and ck are desirable on most crt's. The non-crt entries need to
13: # be changed to turn them off (:cb@:ce@:ck@:).
14: #
15: # lc should always be on; it's a remainder of some stone age when there
16: # have been terminals around not being able of handling lower-case
17: # characters. Those terminals aren't supported any longer, but getty is
18: # `smart' about them by default.
19: #
20: # Parity defaults to even, but the Pc entry and all the `std' entries
21: # specify no parity. The different parities are:
22: # (none): same as ep for getty. login will use terminal as is.
23: # ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and
24: # fake parity. login will use even parity (cs7 parenb -parodd).
25: # op: same as ep except odd parity (cs7 parenb parodd) for login.
26: # getty will fake odd parity as well.
27: # ap: same as ep except -inpck instead of inpck for login.
28: # ap overrides op and ep.
29: # np: 1. don't fake parity in getty. The fake parity garbles
30: # characters on non-terminals (like pccons) that don't
31: # support parity. It would probably better for getty not to
32: # try to fake parity. It could just use cbreak mode so as
33: # not to force cs8 and let the hardware handle the parity.
34: # login has to be rely on the hardware anyway.
35: # 2. set cs8 -parenb -istrip -inpck.
36: # ep:op: same as ap.
37: #
38: default:\
39: :cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\
40: :if=/etc/issue:
41:
42: #
43: # Fixed speed entries
44: #
45: # The "std.NNN" names are known to the special case
46: # portselector code in getty, however they can
47: # be assigned to any table desired.
48: # The "NNN-baud" names are known to the special case
49: # autobaud code in getty, and likewise can
50: # be assigned to any table desired (hopefully the same speed).
51: #
52: a|std.110|110-baud:\
53: :np:nd#1:cd#1:uc:sp#110:
54: b|std.134|134.5-baud:\
55: :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
56: 1|std.150|150-baud:\
57: :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
58: c|std.300|300-baud:\
59: :np:nd#1:cd#1:sp#300:
60: d|std.600|600-baud:\
61: :np:nd#1:cd#1:sp#600:
62: f|std.1200|1200-baud:\
63: :np:fd#1:sp#1200:
64: 6|std.2400|2400-baud:\
65: :np:sp#2400:
66: 7|std.4800|4800-baud:\
67: :np:sp#4800:
68: 2|std.9600|9600-baud:\
69: :np:sp#9600:
70: g|std.19200|19200-baud:\
71: :np:sp#19200:
72: std.38400|38400-baud:\
73: :np:sp#38400:
74: std.57600|57600-baud:\
75: :np:sp#57600:
76: std.115200|115200-baud:\
77: :np:sp#115200:
78: std.230400|230400-baud:\
79: :np:sp#230400:
80:
81: #
82: # Entry specifying explicit device settings. See termios(4) and
83: # /usr/include/termios.h, too. The entry forces the tty into
84: # CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
85: #
86: # cflags: CLOCAL | HUPCL | CREAD | CS8
87: # oflags: OPOST | ONLCR | OXTABS
88: # iflags: IXOFF | IXON | ICRNL | IGNPAR
89: # lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
90: #
91: # The `0' flags don't have input enabled. The `1' flags don't echo.
92: # (Echoing is done inside getty itself.)
93: #
94: local.9600|CLOCAL tty @ 9600 Bd:\
95: :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
96: :o0#0x00000007:o1#0x00000002:o2#0x00000007:\
97: :i0#0x00000704:i1#0x00000000:i2#0x00000704:\
98: :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
1.2 ! misho 99: :sp#9600:np:
1.1 misho 100:
101: #
102: # Dial in rotary tables, speed selection via 'break'
103: #
104: 0|d300|Dial-300:\
105: :nx=d1200:cd#2:sp#300:
106: d1200|Dial-1200:\
107: :nx=d150:fd#1:sp#1200:
108: d150|Dial-150:\
109: :nx=d110:lm@:tc=150-baud:
110: d110|Dial-110:\
111: :nx=d300:tc=300-baud:
112:
113: #
114: # Fast dialup terminals, 2400/1200/300 rotary (can start either way)
115: #
116: D2400|d2400|Fast-Dial-2400:\
117: :nx=D1200:tc=2400-baud:
118: 3|D1200|Fast-Dial-1200:\
119: :nx=D300:tc=1200-baud:
120: 5|D300|Fast-Dial-300:\
121: :nx=D2400:tc=300-baud:
122:
123: #
124: #telebit (19200)
125: #
126: t19200:\
127: :nx=t2400:tc=19200-baud:
128: t2400:\
129: :nx=t1200:tc=2400-baud:
130: t1200:\
131: :nx=t19200:tc=1200-baud:
132:
133: #
134: #telebit (9600)
135: #
136: t9600:\
137: :nx=t2400a:tc=9600-baud:
138: t2400a:\
139: :nx=t1200a:tc=2400-baud:
140: t1200a:\
141: :nx=t9600:tc=1200-baud:
142:
143: #
144: # Odd special case terminals
145: #
146: -|tty33|asr33|Pity the poor user of this beast:\
147: :tc=110-baud:
148:
149: 4|Console|Console Decwriter II:\
150: :nd@:cd@:rw:tc=300-baud:
151:
152: e|Console-1200|Console Decwriter III:\
153: :fd@:nd@:cd@:rw:tc=1200-baud:
154:
155: i|Interdata console:\
156: :uc:sp#0:
157:
158: l|lsi chess terminal:\
159: :sp#300:
160:
161: X|Xwindow|X window system:\
162: :fd@:nd@:cd@:rw:sp#9600:
163:
164: P|Pc|Pc console:\
165: :ht:np:sp#9600:
166:
167: #
1.2 ! misho 168: # Weirdo special case for fast crt's with hardcopy devices
1.1 misho 169: #
170: 8|T9600|CRT with hardcopy:\
171: :nx=T300:tc=9600-baud:
172: 9|T300|CRT with hardcopy (300):\
173: :nx=T9600:tc=300-baud:
174:
175: #
176: # Plugboard, and misc other terminals
177: #
178: plug-9600|Plugboard-9600:\
179: :pf#1:tc=9600-baud:
180: p|P9600|Plugboard-9600-rotary:\
181: :pf#1:nx=P300:tc=9600-baud:
182: q|P300|Plugboard-300:\
183: :pf#1:nx=P1200:tc=300-baud:
184: r|P1200|Plugboard-1200:\
185: :pf#1:nx=P9600:tc=1200-baud:
186:
187: #
188: # XXXX Port selector
189: #
190: s|DSW|Port Selector:\
191: :ps:sp#2400:
192:
193: #
194: # Auto-baud speed detect entry for Micom 600.
195: # Special code in getty will switch this out
196: # to one of the NNN-baud entries.
197: #
198: A|Auto-baud:\
199: :ab:sp#2400:f0#040:
200:
201: #
202: # autologin - automatically log in as root
203: #
204:
205: autologin|al.9600:\
206: :al=root:tc=std.9600:
207: al.19200:\
208: :al=root:tc=std.19200:
209: al.38400:\
210: :al=root:tc=std.38400:
211: al.57600:\
212: :al=root:tc=std.57600:
213: al.115200:\
214: :al=root:tc=std.115200:
215: al.230400:\
216: :al=root:tc=std.230400:
217:
218: #
219: # Entries for 3-wire serial terminals. These don't supply carrier, so
220: # clocal needs to be set, and crtscts needs to be unset.
221: #
222: 3wire.9600|9600-3wire:\
223: :np:nc:sp#9600:
224: 3wire.19200|19200-3wire:\
225: :np:nc:sp#19200:
226: 3wire.38400|38400-3wire:\
227: :np:nc:sp#38400:
228: 3wire.57600|57600-3wire:\
229: :np:nc:sp#57600:
230: 3wire.115200|115200-3wire:\
231: :np:nc:sp#115200:
232: 3wire.230400|230400-3wire:\
233: :np:nc:sp#230400:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to gettytab CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default