Annotation of elwix/config/etc/default/inetd.conf, revision 1.1.1.1

1.1       misho       1: #
                      2: # Internet server configuration database
                      3: #
                      4: # Define *both* IPv4 and IPv6 entries for dual-stack support.
                      5: # To disable a service, comment it out by prefixing the line with '#'.
                      6: # To enable a service, remove the '#' at the beginning of the line.
                      7: #
                      8: #ftp   stream  tcp     nowait  root    /usr/libexec/ftpd       ftpd -l
                      9: #ftp   stream  tcp6    nowait  root    /usr/libexec/ftpd       ftpd -l
                     10: #ssh   stream  tcp     nowait  root    /usr/sbin/sshd          sshd -i -4
                     11: #ssh   stream  tcp6    nowait  root    /usr/sbin/sshd          sshd -i -6
                     12: telnet stream  tcp     nowait  root    /usr/libexec/telnetd    telnetd
                     13: telnet stream  tcp6    nowait  root    /usr/libexec/telnetd    telnetd
                     14: #shell stream  tcp     nowait  root    /usr/libexec/rshd       rshd
                     15: #shell stream  tcp6    nowait  root    /usr/libexec/rshd       rshd
                     16: #login stream  tcp     nowait  root    /usr/libexec/rlogind    rlogind
                     17: #login stream  tcp6    nowait  root    /usr/libexec/rlogind    rlogind
                     18: #finger        stream  tcp     nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
                     19: #finger        stream  tcp6    nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
                     20: #
                     21: # run comsat as root to be able to print partial mailbox contents w/ biff,
                     22: # or use the safer tty:tty to just print that new mail has been received.
                     23: #comsat        dgram   udp     wait    tty:tty /usr/libexec/comsat     comsat
                     24: #
                     25: # ntalk is required for the 'talk' utility to work correctly
                     26: #ntalk dgram   udp     wait    tty:tty /usr/libexec/ntalkd     ntalkd
                     27: tftp   dgram   udp     wait    root    /usr/libexec/tftpd      tftpd -l -s /tftpboot -w
                     28: tftp   dgram   udp6    wait    root    /usr/libexec/tftpd      tftpd -l -s /tftpboot -w
                     29: #bootps        dgram   udp     wait    root    /usr/libexec/bootpd     bootpd
                     30: #
                     31: # "Small servers" -- used to be standard on, but we're more conservative
                     32: # about things due to Internet security concerns.  Only turn on what you
                     33: # need.
                     34: #
                     35: #daytime stream        tcp     nowait  root    internal
                     36: #daytime stream        tcp6    nowait  root    internal
                     37: #daytime dgram udp     wait    root    internal
                     38: #daytime dgram udp6    wait    root    internal
                     39: #time  stream  tcp     nowait  root    internal
                     40: #time  stream  tcp6    nowait  root    internal
                     41: #time   dgram  udp     wait    root    internal
                     42: #time   dgram  udp6    wait    root    internal
                     43: #echo  stream  tcp     nowait  root    internal
                     44: #echo  stream  tcp6    nowait  root    internal
                     45: #echo  dgram   udp     wait    root    internal
                     46: #echo  dgram   udp6    wait    root    internal
                     47: #discard stream        tcp     nowait  root    internal
                     48: #discard stream        tcp6    nowait  root    internal
                     49: #discard dgram udp     wait    root    internal
                     50: #discard dgram udp6    wait    root    internal
                     51: #chargen stream        tcp     nowait  root    internal
                     52: #chargen stream        tcp6    nowait  root    internal
                     53: #chargen dgram udp     wait    root    internal
                     54: #chargen dgram udp6    wait    root    internal
                     55: #
                     56: # CVS servers - for master CVS repositories only!  You must set the
                     57: # --allow-root path correctly or you open a trivial to exploit but
                     58: # deadly security hole.
                     59: #
                     60: #cvspserver    stream  tcp     nowait  root    /usr/bin/cvs    cvs --allow-root=/your/cvsroot/here pserver
                     61: #cvspserver    stream  tcp     nowait  root    /usr/bin/cvs    cvs --allow-root=/your/cvsroot/here kserver
                     62: #
                     63: # RPC based services (you MUST have rpcbind running to use these)
                     64: #
                     65: #rstatd/1-3    dgram rpc/udp wait root /usr/libexec/rpc.rstatd  rpc.rstatd
                     66: #rusersd/1-2   dgram rpc/udp wait root /usr/libexec/rpc.rusersd rpc.rusersd
                     67: #walld/1       dgram rpc/udp wait root /usr/libexec/rpc.rwalld  rpc.rwalld
                     68: #pcnfsd/1-2    dgram rpc/udp wait root /usr/local/libexec/rpc.pcnfsd    rpc.pcnfsd
                     69: #rquotad/1     dgram rpc/udp wait root /usr/libexec/rpc.rquotad rpc.rquotad
                     70: #sprayd/1      dgram rpc/udp wait root /usr/libexec/rpc.sprayd  rpc.sprayd
                     71: #
                     72: # example entry for the optional pop3 server
                     73: #
                     74: #pop3  stream  tcp     nowait  root    /usr/local/libexec/popper       popper
                     75: #
                     76: # example entry for the optional imap4 server
                     77: #
                     78: #imap4 stream  tcp     nowait  root    /usr/local/libexec/imapd        imapd
                     79: #
                     80: # example entry for the optional nntp server
                     81: #
                     82: #nntp  stream  tcp     nowait  news    /usr/local/libexec/nntpd        nntpd
                     83: #
                     84: # example entry for the optional uucpd server
                     85: #
                     86: #uucpd stream  tcp     nowait  root    /usr/local/libexec/uucpd        uucpd
                     87: #
                     88: # Return error for all "ident" requests
                     89: #
                     90: #auth  stream  tcp     nowait  root    internal
                     91: #auth  stream  tcp6    nowait  root    internal
                     92: #
                     93: # Provide internally a real "ident" service which provides ~/.fakeid support,
                     94: # provides ~/.noident support, reports UNKNOWN as the operating system type
                     95: # and times out after 30 seconds.
                     96: #
                     97: #auth  stream  tcp     nowait  root    internal        auth -r -f -n -o UNKNOWN -t 30
                     98: #auth  stream  tcp6    nowait  root    internal        auth -r -f -n -o UNKNOWN -t 30
                     99: #
                    100: # Example entry for an external ident server
                    101: #
                    102: #auth  stream  tcp     wait    root    /usr/local/sbin/identd  identd -w -t120
                    103: #
                    104: # Example entry for the optional qmail MTA
                    105: #  NOTE: This is no longer the correct way to handle incoming SMTP
                    106: #        connections for qmail.  Use tcpserver (http://cr.yp.to/ucspi-tcp.html)
                    107: #        instead.
                    108: #
                    109: #smtp  stream  tcp     nowait  qmaild  /var/qmail/bin/tcp-env  tcp-env /var/qmail/bin/qmail-smtpd
                    110: #
                    111: # Enable the following two entries to enable samba startup from inetd
                    112: # (from the Samba documentation).  Enable the third entry to enable the swat
                    113: # samba configuration tool.
                    114: #
                    115: #netbios-ssn stream tcp        nowait          root    /usr/local/sbin/smbd    smbd
                    116: #netbios-ns dgram udp  wait            root    /usr/local/sbin/nmbd    nmbd
                    117: #swat  stream  tcp     nowait/400      root    /usr/local/sbin/swat    swat

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>