Return to inetd.conf CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

Annotation of elwix/config/etc/default/inetd.conf, revision 1.2

1.2     ! misho       1: # $FreeBSD: src/etc/inetd.conf,v 1.76 2012/11/17 01:49:01 svnexp Exp $
1.1       misho       2: #
                      3: # Internet server configuration database
                      4: #
                      5: # Define *both* IPv4 and IPv6 entries for dual-stack support.
                      6: # To disable a service, comment it out by prefixing the line with '#'.
                      7: # To enable a service, remove the '#' at the beginning of the line.
                      8: #
                      9: #ftp   stream  tcp     nowait  root    /usr/libexec/ftpd       ftpd -l
                     10: #ftp   stream  tcp6    nowait  root    /usr/libexec/ftpd       ftpd -l
                     11: #ssh   stream  tcp     nowait  root    /usr/sbin/sshd          sshd -i -4
                     12: #ssh   stream  tcp6    nowait  root    /usr/sbin/sshd          sshd -i -6
1.2     ! misho      13: #telnet        stream  tcp     nowait  root    /usr/libexec/telnetd    telnetd
        !            14: #telnet        stream  tcp6    nowait  root    /usr/libexec/telnetd    telnetd
1.1       misho      15: #shell stream  tcp     nowait  root    /usr/libexec/rshd       rshd
                     16: #shell stream  tcp6    nowait  root    /usr/libexec/rshd       rshd
                     17: #login stream  tcp     nowait  root    /usr/libexec/rlogind    rlogind
                     18: #login stream  tcp6    nowait  root    /usr/libexec/rlogind    rlogind
                     19: #finger        stream  tcp     nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
                     20: #finger        stream  tcp6    nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
                     21: #
                     22: # run comsat as root to be able to print partial mailbox contents w/ biff,
                     23: # or use the safer tty:tty to just print that new mail has been received.
                     24: #comsat        dgram   udp     wait    tty:tty /usr/libexec/comsat     comsat
                     25: #
                     26: # ntalk is required for the 'talk' utility to work correctly
                     27: #ntalk dgram   udp     wait    tty:tty /usr/libexec/ntalkd     ntalkd
                     28: tftp   dgram   udp     wait    root    /usr/libexec/tftpd      tftpd -l -s /tftpboot -w
                     29: tftp   dgram   udp6    wait    root    /usr/libexec/tftpd      tftpd -l -s /tftpboot -w
                     30: #bootps        dgram   udp     wait    root    /usr/libexec/bootpd     bootpd
                     31: #
                     32: # "Small servers" -- used to be standard on, but we're more conservative
                     33: # about things due to Internet security concerns.  Only turn on what you
                     34: # need.
                     35: #
                     36: #daytime stream        tcp     nowait  root    internal
                     37: #daytime stream        tcp6    nowait  root    internal
                     38: #daytime dgram udp     wait    root    internal
                     39: #daytime dgram udp6    wait    root    internal
                     40: #time  stream  tcp     nowait  root    internal
                     41: #time  stream  tcp6    nowait  root    internal
                     42: #time   dgram  udp     wait    root    internal
                     43: #time   dgram  udp6    wait    root    internal
                     44: #echo  stream  tcp     nowait  root    internal
                     45: #echo  stream  tcp6    nowait  root    internal
                     46: #echo  dgram   udp     wait    root    internal
                     47: #echo  dgram   udp6    wait    root    internal
                     48: #discard stream        tcp     nowait  root    internal
                     49: #discard stream        tcp6    nowait  root    internal
                     50: #discard dgram udp     wait    root    internal
                     51: #discard dgram udp6    wait    root    internal
                     52: #chargen stream        tcp     nowait  root    internal
                     53: #chargen stream        tcp6    nowait  root    internal
                     54: #chargen dgram udp     wait    root    internal
                     55: #chargen dgram udp6    wait    root    internal
                     56: #
                     57: # CVS servers - for master CVS repositories only!  You must set the
                     58: # --allow-root path correctly or you open a trivial to exploit but
                     59: # deadly security hole.
                     60: #
                     61: #cvspserver    stream  tcp     nowait  root    /usr/bin/cvs    cvs --allow-root=/your/cvsroot/here pserver
                     62: #cvspserver    stream  tcp     nowait  root    /usr/bin/cvs    cvs --allow-root=/your/cvsroot/here kserver
                     63: #
                     64: # RPC based services (you MUST have rpcbind running to use these)
                     65: #
                     66: #rstatd/1-3    dgram rpc/udp wait root /usr/libexec/rpc.rstatd  rpc.rstatd
                     67: #rusersd/1-2   dgram rpc/udp wait root /usr/libexec/rpc.rusersd rpc.rusersd
                     68: #walld/1       dgram rpc/udp wait root /usr/libexec/rpc.rwalld  rpc.rwalld
                     69: #pcnfsd/1-2    dgram rpc/udp wait root /usr/local/libexec/rpc.pcnfsd    rpc.pcnfsd
                     70: #rquotad/1     dgram rpc/udp wait root /usr/libexec/rpc.rquotad rpc.rquotad
                     71: #sprayd/1      dgram rpc/udp wait root /usr/libexec/rpc.sprayd  rpc.sprayd
                     72: #
                     73: # example entry for the optional pop3 server
                     74: #
                     75: #pop3  stream  tcp     nowait  root    /usr/local/libexec/popper       popper
                     76: #
                     77: # example entry for the optional imap4 server
                     78: #
                     79: #imap4 stream  tcp     nowait  root    /usr/local/libexec/imapd        imapd
                     80: #
                     81: # example entry for the optional nntp server
                     82: #
                     83: #nntp  stream  tcp     nowait  news    /usr/local/libexec/nntpd        nntpd
                     84: #
                     85: # example entry for the optional uucpd server
                     86: #
                     87: #uucpd stream  tcp     nowait  root    /usr/local/libexec/uucpd        uucpd
                     88: #
                     89: # Return error for all "ident" requests
                     90: #
                     91: #auth  stream  tcp     nowait  root    internal
                     92: #auth  stream  tcp6    nowait  root    internal
                     93: #
                     94: # Provide internally a real "ident" service which provides ~/.fakeid support,
                     95: # provides ~/.noident support, reports UNKNOWN as the operating system type
                     96: # and times out after 30 seconds.
                     97: #
                     98: #auth  stream  tcp     nowait  root    internal        auth -r -f -n -o UNKNOWN -t 30
                     99: #auth  stream  tcp6    nowait  root    internal        auth -r -f -n -o UNKNOWN -t 30
                    100: #
                    101: # Example entry for an external ident server
                    102: #
                    103: #auth  stream  tcp     wait    root    /usr/local/sbin/identd  identd -w -t120
                    104: #
                    105: # Example entry for the optional qmail MTA
                    106: #  NOTE: This is no longer the correct way to handle incoming SMTP
                    107: #        connections for qmail.  Use tcpserver (http://cr.yp.to/ucspi-tcp.html)
                    108: #        instead.
                    109: #
                    110: #smtp  stream  tcp     nowait  qmaild  /var/qmail/bin/tcp-env  tcp-env /var/qmail/bin/qmail-smtpd
                    111: #
                    112: # Enable the following two entries to enable samba startup from inetd
                    113: # (from the Samba documentation).  Enable the third entry to enable the swat
                    114: # samba configuration tool.
                    115: #
                    116: #netbios-ssn stream tcp        nowait          root    /usr/local/sbin/smbd    smbd
                    117: #netbios-ns dgram udp  wait            root    /usr/local/sbin/nmbd    nmbd
                    118: #swat  stream  tcp     nowait/400      root    /usr/local/sbin/swat    swat