--- elwix/config/etc/default/istgt/Attic/istgt.conf.sample	2012/01/31 12:58:08	1.1
+++ elwix/config/etc/default/istgt/Attic/istgt.conf.sample	2012/10/12 08:22:44	1.2
@@ -0,0 +1,175 @@
+# istgt configuration file
+#
+# Please do not write parameters excluding ASCII.
+# The parameter must be quoted if space or separator include.
+#
+# configuration syntax:
+# spaces at head of line are deleted, other spaces are as separator
+# starting with '#' is comment line, not evaluate
+# ending with '\' is concatenating next line
+# bracket key is section key grouping following keys
+# group number of section key is used as tag number
+# (group number might not be continuous value)
+# 1st string is key may appear multiple times
+# 2nd and more are value associated the key
+# Comment key is placed for human readable like user interface
+#
+[Global]
+  Comment "Global section"
+  # node name (not include optional part)
+  NodeBase "iqn.2007-09.jp.ne.peach.istgt"
+
+  # files
+  PidFile /var/run/istgt.pid
+  AuthFile /tmp/etc/istgt/auth.conf
+
+  # directories
+  # for removable media (virtual DVD/virtual Tape)
+  MediaDirectory /var/istgt
+
+  # syslog facility
+  LogFacility "local7"
+
+  # socket I/O timeout sec. (polling is infinity)
+  Timeout 30
+  # NOPIN sending interval sec.
+  NopInInterval 20
+
+  # authentication information for discovery session
+  DiscoveryAuthMethod Auto
+  #DiscoveryAuthGroup AuthGroup9999
+
+  # reserved maximum connections and sessions
+  # NOTE: iSCSI boot is 2 or more sessions required
+  MaxSessions 16
+  MaxConnections 4
+
+  # maximum number of sending R2T in each connection
+  # actual number is limited to QueueDepth and MaxCmdSN and ExpCmdSN
+  # 0=disabled, 1-256=improves large writing
+  MaxR2T 32
+
+  # iSCSI initial parameters negotiate with initiators
+  # NOTE: incorrect values might crash
+  MaxOutstandingR2T 16
+  DefaultTime2Wait 2
+  DefaultTime2Retain 60
+  FirstBurstLength 262144
+  MaxBurstLength 1048576
+  MaxRecvDataSegmentLength 262144
+
+  # NOTE: not supported
+  InitialR2T Yes
+  ImmediateData Yes
+  DataPDUInOrder Yes
+  DataSequenceInOrder Yes
+  ErrorRecoveryLevel 0
+
+[UnitControl]
+  Comment "Internal Logical Unit Controller"
+  #AuthMethod Auto
+  AuthMethod CHAP Mutual
+  AuthGroup AuthGroup10000
+  # this portal is only used as controller (by istgtcontrol)
+  # if it's not necessary, no portal is valid
+  #Portal UC1 [::1]:3261
+  Portal UC1 127.0.0.1:3261
+  # accept IP netmask
+  #Netmask [::1]
+  Netmask 127.0.0.1
+
+# You should set IPs in /etc/rc.conf for physical I/F
+[PortalGroup1]
+  Comment "SINGLE PORT TEST"
+  # Portal Label(not used) IP(IPv6 or IPv4):Port
+  #Portal DA1 [2001:03e0:06cf:0003:021b:21ff:fe04:f405]:3260
+  Portal DA1 192.168.2.36:3260
+
+# wildcard address you may need if use DHCP
+# DO NOT USE WITH OTHER PORTALS
+#[PortalGroup1]
+#  Comment "ANY IP"
+#  # Portal Label(not used) IP(IPv6 or IPv4):Port
+#  #Portal DA1 [::]:3260
+#  Portal DA1 0.0.0.0:3260
+
+[InitiatorGroup1]
+  Comment "Initiator Group1"
+  # name with ! deny login/discovery
+  #InitiatorName "!iqn.1991-05.com.microsoft:moon"
+  # spetified name allow login/discovery
+  #InitiatorName "iqn.1991-05.com.microsoft:saturn"
+  # special word "ALL" match all of initiators
+  InitiatorName "ALL"
+  Netmask 192.168.2.0/24
+
+# TargetName, Mapping, UnitType, LUN0 are minimum required
+[LogicalUnit1]
+  Comment "Hard Disk Sample"
+  # full specified iqn (same as below)
+  #TargetName iqn.2007-09.jp.ne.peach.istgt:disk1
+  # short specified non iqn (will add NodeBase)
+  TargetName disk1
+  TargetAlias "Data Disk1"
+  # use initiators in tag1 via portals in tag1
+  Mapping PortalGroup1 InitiatorGroup1
+  # accept both CHAP and None
+  AuthMethod Auto
+  AuthGroup AuthGroup1
+  #UseDigest Header Data
+  UseDigest Auto
+  UnitType Disk
+  # SCSI INQUIRY - Vendor(8) Product(16) Revision(4) Serial(16)
+  #UnitInquiry "FreeBSD" "iSCSI Disk" "0123" "10000001"
+  # Queuing 0=disabled, 1-255=enabled with specified depth.
+  #QueueDepth 32
+
+  # override global setting if need
+  #MaxOutstandingR2T 16
+  #DefaultTime2Wait 2
+  #DefaultTime2Retain 60
+  #FirstBurstLength 262144
+  #MaxBurstLength 1048576
+  #MaxRecvDataSegmentLength 262144
+  #InitialR2T Yes
+  #ImmediateData Yes
+  #DataPDUInOrder Yes
+  #DataSequenceInOrder Yes
+  #ErrorRecoveryLevel 0
+
+  # LogicalVolume for this unit on LUN0
+  # for file extent
+  LUN0 Storage /tank/iscsi/istgt-disk1 10GB
+  # for raw device extent
+  #LUN0 Storage /dev/ad4 Auto
+  # for ZFS volume extent
+  #LUN0 Storage /dev/zvol/tank/istgt-vol1 Auto
+
+  # override the serial of LUN0 specified with UnitInquiry
+  #LUN0 Option Serial "10000001"
+
+  # for 3.5inch, 7200rpm HDD
+  # RPM 0=not reported, 1=non-rotating(SSD), n>1024 rpm
+  #LUN0 Option RPM 7200
+  # FormFactor 0=not reported, 1=5.25, 2=3.5, 3=2.5, 4=1.8, 5=less 1.8 inch
+  #LUN0 Option FormFactor 2
+
+  # for 2.5inch, SSD
+  #LUN0 Option RPM 1
+  #LUN0 Option FormFactor 3
+
+  # for future use (enabled by default)
+  #LUN0 Option ReadCache Disable
+  #LUN0 Option WriteCache Disable
+
+#[LogicalUnit2]
+#  # SCSI commands pass through to SCSI device by CAM
+#  Comment "Pass-through Disk Sample"
+#  TargetName pass-disk1
+#  TargetAlias "Pass Through Disk1"
+#  Mapping PortalGroup1 InitiatorGroup1
+#  AuthMethod Auto
+#  AuthGroup AuthGroup1
+#  UnitType Pass
+#  # DO NOT SPECIFY PARTITION, PASS-THROUGH USE ENTIRE LOGICAL UNIT
+#  LUN0 Device /dev/da0