elwix/config/etc/default/istgt/istgt.conf.sample - diff

Return to istgt.conf.sample CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / istgt

Diff for /elwix/config/etc/default/istgt/Attic/istgt.conf.sample between versions 1.1 and 1.2

-version 1.1, 2012/01/31 12:58:08
+version 1.2, 2012/10/12 08:22:44
- Line 0
+ Line 1
+ # istgt configuration file
+ #
+ # Please do not write parameters excluding ASCII.
+ # The parameter must be quoted if space or separator include.
+ #
+ # configuration syntax:
+ # spaces at head of line are deleted, other spaces are as separator
+ # starting with '#' is comment line, not evaluate
+ # ending with '\' is concatenating next line
+ # bracket key is section key grouping following keys
+ # group number of section key is used as tag number
+ # (group number might not be continuous value)
+ # 1st string is key may appear multiple times
+ # 2nd and more are value associated the key
+ # Comment key is placed for human readable like user interface
+ #
+ [Global]
+   Comment "Global section"
+   # node name (not include optional part)
+   NodeBase "iqn.2007-09.jp.ne.peach.istgt"
+   # files
+   PidFile /var/run/istgt.pid
+   AuthFile /tmp/etc/istgt/auth.conf
+   # directories
+   # for removable media (virtual DVD/virtual Tape)
+   MediaDirectory /var/istgt
+   # syslog facility
+   LogFacility "local7"
+   # socket I/O timeout sec. (polling is infinity)
+   Timeout 30
+   # NOPIN sending interval sec.
+   NopInInterval 20
+   # authentication information for discovery session
+   DiscoveryAuthMethod Auto
+   #DiscoveryAuthGroup AuthGroup9999
+   # reserved maximum connections and sessions
+   # NOTE: iSCSI boot is 2 or more sessions required
+   MaxSessions 16
+   MaxConnections 4
+   # maximum number of sending R2T in each connection
+   # actual number is limited to QueueDepth and MaxCmdSN and ExpCmdSN
+   # 0=disabled, 1-256=improves large writing
+   MaxR2T 32
+   # iSCSI initial parameters negotiate with initiators
+   # NOTE: incorrect values might crash
+   MaxOutstandingR2T 16
+   DefaultTime2Wait 2
+   DefaultTime2Retain 60
+   FirstBurstLength 262144
+   MaxBurstLength 1048576
+   MaxRecvDataSegmentLength 262144
+   # NOTE: not supported
+   InitialR2T Yes
+   ImmediateData Yes
+   DataPDUInOrder Yes
+   DataSequenceInOrder Yes
+   ErrorRecoveryLevel 0
+ [UnitControl]
+   Comment "Internal Logical Unit Controller"
+   #AuthMethod Auto
+   AuthMethod CHAP Mutual
+   AuthGroup AuthGroup10000
+   # this portal is only used as controller (by istgtcontrol)
+   # if it's not necessary, no portal is valid
+   #Portal UC1 [::1]:3261
+   Portal UC1 127.0.0.1:3261
+   # accept IP netmask
+   #Netmask [::1]
+   Netmask 127.0.0.1
+ # You should set IPs in /etc/rc.conf for physical I/F
+ [PortalGroup1]
+   Comment "SINGLE PORT TEST"
+   # Portal Label(not used) IP(IPv6 or IPv4):Port
+   #Portal DA1 [2001:03e0:06cf:0003:021b:21ff:fe04:f405]:3260
+   Portal DA1 192.168.2.36:3260
+ # wildcard address you may need if use DHCP
+ # DO NOT USE WITH OTHER PORTALS
+ #[PortalGroup1]
+ #  Comment "ANY IP"
+ #  # Portal Label(not used) IP(IPv6 or IPv4):Port
+ #  #Portal DA1 [::]:3260
+ #  Portal DA1 0.0.0.0:3260
+ [InitiatorGroup1]
+   Comment "Initiator Group1"
+   # name with ! deny login/discovery
+   #InitiatorName "!iqn.1991-05.com.microsoft:moon"
+   # spetified name allow login/discovery
+   #InitiatorName "iqn.1991-05.com.microsoft:saturn"
+   # special word "ALL" match all of initiators
+   InitiatorName "ALL"
+   Netmask 192.168.2.0/24
+ # TargetName, Mapping, UnitType, LUN0 are minimum required
+ [LogicalUnit1]
+   Comment "Hard Disk Sample"
+   # full specified iqn (same as below)
+   #TargetName iqn.2007-09.jp.ne.peach.istgt:disk1
+   # short specified non iqn (will add NodeBase)
+   TargetName disk1
+   TargetAlias "Data Disk1"
+   # use initiators in tag1 via portals in tag1
+   Mapping PortalGroup1 InitiatorGroup1
+   # accept both CHAP and None
+   AuthMethod Auto
+   AuthGroup AuthGroup1
+   #UseDigest Header Data
+   UseDigest Auto
+   UnitType Disk
+   # SCSI INQUIRY - Vendor(8) Product(16) Revision(4) Serial(16)
+   #UnitInquiry "FreeBSD" "iSCSI Disk" "0123" "10000001"
+   # Queuing 0=disabled, 1-255=enabled with specified depth.
+   #QueueDepth 32
+   # override global setting if need
+   #MaxOutstandingR2T 16
+   #DefaultTime2Wait 2
+   #DefaultTime2Retain 60
+   #FirstBurstLength 262144
+   #MaxBurstLength 1048576
+   #MaxRecvDataSegmentLength 262144
+   #InitialR2T Yes
+   #ImmediateData Yes
+   #DataPDUInOrder Yes
+   #DataSequenceInOrder Yes
+   #ErrorRecoveryLevel 0
+   # LogicalVolume for this unit on LUN0
+   # for file extent
+   LUN0 Storage /tank/iscsi/istgt-disk1 10GB
+   # for raw device extent
+   #LUN0 Storage /dev/ad4 Auto
+   # for ZFS volume extent
+   #LUN0 Storage /dev/zvol/tank/istgt-vol1 Auto
+   # override the serial of LUN0 specified with UnitInquiry
+   #LUN0 Option Serial "10000001"
+   # for 3.5inch, 7200rpm HDD
+   # RPM 0=not reported, 1=non-rotating(SSD), n>1024 rpm
+   #LUN0 Option RPM 7200
+   # FormFactor 0=not reported, 1=5.25, 2=3.5, 3=2.5, 4=1.8, 5=less 1.8 inch
+   #LUN0 Option FormFactor 2
+   # for 2.5inch, SSD
+   #LUN0 Option RPM 1
+   #LUN0 Option FormFactor 3
+   # for future use (enabled by default)
+   #LUN0 Option ReadCache Disable
+   #LUN0 Option WriteCache Disable
+ #[LogicalUnit2]
+ #  # SCSI commands pass through to SCSI device by CAM
+ #  Comment "Pass-through Disk Sample"
+ #  TargetName pass-disk1
+ #  TargetAlias "Pass Through Disk1"
+ #  Mapping PortalGroup1 InitiatorGroup1
+ #  AuthMethod Auto
+ #  AuthGroup AuthGroup1
+ #  UnitType Pass
+ #  # DO NOT SPECIFY PARTITION, PASS-THROUGH USE ENTIRE LOGICAL UNIT
+ #  LUN0 Device /dev/da0

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.1
changed lines
	Added in v.1.2