Annotation of elwix/config/etc/default/lighttpd/lighttpd.conf.sample, revision 1.2
1.2 ! misho 1: #######################################################################
! 2: ##
! 3: ## /usr/local/etc/lighttpd/lighttpd.conf
! 4: ##
! 5: ## check /usr/local/etc/lighttpd/conf.d/*.conf for the configuration of modules.
! 6: ##
! 7: #######################################################################
! 8:
! 9: #######################################################################
! 10: ##
! 11: ## Some Variable definition which will make chrooting easier.
! 12: ##
! 13: ## if you add a variable here. Add the corresponding variable in the
! 14: ## chroot example aswell.
! 15: ##
! 16: var.log_root = "/var/log/lighttpd"
! 17: var.server_root = "/usr/local/www/data"
! 18: var.state_dir = "/var/run"
! 19: var.home_dir = "/var/spool/lighttpd"
! 20: var.conf_dir = "/usr/local/etc/lighttpd"
! 21:
! 22: ##
! 23: ## run the server chrooted.
! 24: ##
! 25: ## This requires root permissions during startup.
! 26: ##
! 27: ## If you run Chrooted set the the variables to directories relative to
! 28: ## the chroot dir.
! 29: ##
! 30: ## example chroot configuration:
! 31: ##
! 32: #var.log_root = "/logs"
! 33: #var.server_root = "/"
! 34: #var.state_dir = "/run"
! 35: #var.home_dir = "/lib/lighttpd"
! 36: #var.vhosts_dir = "/vhosts"
! 37: #var.conf_dir = "/etc"
! 38: #
! 39: #server.chroot = "/srv/www"
! 40:
! 41: ##
! 42: ## Some additional variables to make the configuration easier
! 43: ##
! 44:
! 45: ##
! 46: ## Base directory for all virtual hosts
! 47: ##
! 48: ## used in:
! 49: ## conf.d/evhost.conf
! 50: ## conf.d/simple_vhost.conf
! 51: ## vhosts.d/vhosts.template
! 52: ##
! 53: var.vhosts_dir = server_root + "/vhosts"
! 54:
! 55: ##
! 56: ## Cache for mod_compress
! 57: ##
! 58: ## used in:
! 59: ## conf.d/compress.conf
! 60: ##
! 61: var.cache_dir = "/var/cache/lighttpd"
! 62:
! 63: ##
! 64: ## Base directory for sockets.
! 65: ##
! 66: ## used in:
! 67: ## conf.d/fastcgi.conf
! 68: ## conf.d/scgi.conf
! 69: ##
! 70: var.socket_dir = home_dir + "/sockets"
! 71:
! 72: ##
! 73: #######################################################################
! 74:
! 75: #######################################################################
! 76: ##
! 77: ## Load the modules.
! 78: include "modules.conf"
! 79:
! 80: ##
! 81: #######################################################################
! 82:
! 83: #######################################################################
! 84: ##
! 85: ## Basic Configuration
! 86: ## ---------------------
! 87: ##
! 88: server.port = 80
! 89:
! 90: ##
! 91: ## Use IPv6?
! 92: ##
! 93: server.use-ipv6 = "enable"
! 94:
! 95: ##
! 96: ## bind to a specific IP
! 97: ##
! 98: #server.bind = "localhost"
! 99:
! 100: ##
! 101: ## Run as a different username/groupname.
! 102: ## This requires root permissions during startup.
! 103: ##
! 104: server.username = "www"
! 105: server.groupname = "www"
! 106:
! 107: ##
! 108: ## enable core files.
! 109: ##
! 110: #server.core-files = "disable"
! 111:
! 112: ##
! 113: ## Document root
! 114: ##
! 115: server.document-root = "/usr/local/www/data/"
! 116:
! 117: ##
! 118: ## The value for the "Server:" response field.
! 119: ##
! 120: ## It would be nice to keep it at "lighttpd".
! 121: ##
! 122: #server.tag = "lighttpd"
! 123:
! 124: ##
! 125: ## store a pid file
! 126: ##
! 127: server.pid-file = state_dir + "/lighttpd.pid"
! 128:
! 129: ##
! 130: #######################################################################
! 131:
! 132: #######################################################################
! 133: ##
! 134: ## Logging Options
! 135: ## ------------------
! 136: ##
! 137: ## all logging options can be overwritten per vhost.
! 138: ##
! 139: ## Path to the error log file
! 140: ##
! 141: server.errorlog = log_root + "/error.log"
! 142:
! 143: ##
! 144: ## If you want to log to syslog you have to unset the
! 145: ## server.errorlog setting and uncomment the next line.
! 146: ##
! 147: #server.errorlog-use-syslog = "enable"
! 148:
! 149: ##
! 150: ## Access log config
! 151: ##
! 152: include "conf.d/access_log.conf"
! 153:
! 154: ##
! 155: ## The debug options are moved into their own file.
! 156: ## see conf.d/debug.conf for various options for request debugging.
! 157: ##
! 158: include "conf.d/debug.conf"
! 159:
! 160: ##
! 161: #######################################################################
! 162:
! 163: #######################################################################
! 164: ##
! 165: ## Tuning/Performance
! 166: ## --------------------
! 167: ##
! 168: ## corresponding documentation:
! 169: ## http://www.lighttpd.net/documentation/performance.html
! 170: ##
! 171: ## set the event-handler (read the performance section in the manual)
! 172: ##
! 173: ## possible options on linux are:
! 174: ##
! 175: ## select
! 176: ## poll
! 177: ## linux-sysepoll
! 178: ##
! 179: ## linux-sysepoll is recommended on kernel 2.6.
! 180: ##
! 181: server.event-handler = "freebsd-kqueue"
! 182:
! 183: ##
! 184: ## The basic network interface for all platforms at the syscalls read()
! 185: ## and write(). Every modern OS provides its own syscall to help network
! 186: ## servers transfer files as fast as possible
! 187: ##
! 188: ## linux-sendfile - is recommended for small files.
! 189: ## writev - is recommended for sending many large files
! 190: ##
! 191: server.network-backend = "writev"
! 192:
! 193: ##
! 194: ## As lighttpd is a single-threaded server, its main resource limit is
! 195: ## the number of file descriptors, which is set to 1024 by default (on
! 196: ## most systems).
! 197: ##
! 198: ## If you are running a high-traffic site you might want to increase this
! 199: ## limit by setting server.max-fds.
! 200: ##
! 201: ## Changing this setting requires root permissions on startup. see
! 202: ## server.username/server.groupname.
! 203: ##
! 204: ## By default lighttpd would not change the operation system default.
! 205: ## But setting it to 2048 is a better default for busy servers.
! 206: ##
! 207: server.max-fds = 2048
! 208:
! 209: ##
! 210: ## Stat() call caching.
! 211: ##
! 212: ## lighttpd can utilize FAM/Gamin to cache stat call.
! 213: ##
! 214: ## possible values are:
! 215: ## disable, simple or fam.
! 216: ##
! 217: server.stat-cache-engine = "simple"
! 218:
! 219: ##
! 220: ## Fine tuning for the request handling
! 221: ##
! 222: ## max-connections == max-fds/2 (maybe /3)
! 223: ## means the other file handles are used for fastcgi/files
! 224: ##
! 225: server.max-connections = 1024
! 226:
! 227: ##
! 228: ## How many seconds to keep a keep-alive connection open,
! 229: ## until we consider it idle.
! 230: ##
! 231: ## Default: 5
! 232: ##
! 233: #server.max-keep-alive-idle = 5
! 234:
! 235: ##
! 236: ## How many keep-alive requests until closing the connection.
! 237: ##
! 238: ## Default: 16
! 239: ##
! 240: #server.max-keep-alive-requests = 16
! 241:
! 242: ##
! 243: ## Maximum size of a request in kilobytes.
! 244: ## By default it is unlimited (0).
! 245: ##
! 246: ## Uploads to your server cant be larger than this value.
! 247: ##
! 248: #server.max-request-size = 0
! 249:
! 250: ##
! 251: ## Time to read from a socket before we consider it idle.
! 252: ##
! 253: ## Default: 60
! 254: ##
! 255: #server.max-read-idle = 60
! 256:
! 257: ##
! 258: ## Time to write to a socket before we consider it idle.
! 259: ##
! 260: ## Default: 360
! 261: ##
! 262: #server.max-write-idle = 360
! 263:
! 264: ##
! 265: ## Traffic Shaping
! 266: ## -----------------
! 267: ##
! 268: ## see /usr/share/doc/lighttpd/traffic-shaping.txt
! 269: ##
! 270: ## Values are in kilobyte per second.
! 271: ##
! 272: ## Keep in mind that a limit below 32kB/s might actually limit the
! 273: ## traffic to 32kB/s. This is caused by the size of the TCP send
! 274: ## buffer.
! 275: ##
! 276: ## per server:
! 277: ##
! 278: #server.kbytes-per-second = 128
! 279:
! 280: ##
! 281: ## per connection:
! 282: ##
! 283: #connection.kbytes-per-second = 32
! 284:
! 285: ##
! 286: #######################################################################
! 287:
! 288: #######################################################################
! 289: ##
! 290: ## Filename/File handling
! 291: ## ------------------------
! 292:
! 293: ##
! 294: ## files to check for if .../ is requested
! 295: ## index-file.names = ( "index.php", "index.rb", "index.html",
! 296: ## "index.htm", "default.htm" )
! 297: ##
! 298: index-file.names += (
! 299: "index.xhtml", "index.html", "index.htm", "default.htm", "index.php"
! 300: )
! 301:
! 302: ##
! 303: ## deny access the file-extensions
! 304: ##
! 305: ## ~ is for backupfiles from vi, emacs, joe, ...
! 306: ## .inc is often used for code includes which should in general not be part
! 307: ## of the document-root
! 308: url.access-deny = ( "~", ".inc" )
! 309:
! 310: ##
! 311: ## disable range requests for pdf files
! 312: ## workaround for a bug in the Acrobat Reader plugin.
! 313: ##
! 314: $HTTP["url"] =~ "\.pdf$" {
! 315: server.range-requests = "disable"
! 316: }
! 317:
! 318: ##
! 319: ## url handling modules (rewrite, redirect)
! 320: ##
! 321: #url.rewrite = ( "^/$" => "/server-status" )
! 322: #url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" )
! 323:
! 324: ##
! 325: ## both rewrite/redirect support back reference to regex conditional using %n
! 326: ##
! 327: #$HTTP["host"] =~ "^www\.(.*)" {
! 328: # url.redirect = ( "^/(.*)" => "http://%1/$1" )
! 329: #}
! 330:
! 331: ##
! 332: ## which extensions should not be handle via static-file transfer
! 333: ##
! 334: ## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
! 335: ##
! 336: static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" )
! 337:
! 338: ##
! 339: ## error-handler for status 404
! 340: ##
! 341: #server.error-handler-404 = "/error-handler.html"
! 342: #server.error-handler-404 = "/error-handler.php"
! 343:
! 344: ##
! 345: ## Format: <errorfile-prefix><status-code>.html
! 346: ## -> ..../status-404.html for 'File not found'
! 347: ##
! 348: #server.errorfile-prefix = "/srv/www/htdocs/errors/status-"
! 349:
! 350: ##
! 351: ## mimetype mapping
! 352: ##
! 353: include "conf.d/mime.conf"
! 354:
! 355: ##
! 356: ## directory listing configuration
! 357: ##
! 358: include "conf.d/dirlisting.conf"
! 359:
! 360: ##
! 361: ## Should lighttpd follow symlinks?
! 362: ##
! 363: server.follow-symlink = "enable"
! 364:
! 365: ##
! 366: ## force all filenames to be lowercase?
! 367: ##
! 368: #server.force-lowercase-filenames = "disable"
! 369:
! 370: ##
! 371: ## defaults to /var/tmp as we assume it is a local harddisk
! 372: ##
! 373: server.upload-dirs = ( "/var/tmp" )
! 374:
! 375: ##
! 376: #######################################################################
! 377:
! 378:
! 379: #######################################################################
! 380: ##
! 381: ## SSL Support
! 382: ## -------------
! 383: ##
! 384: ## To enable SSL for the whole server you have to provide a valid
! 385: ## certificate and have to enable the SSL engine.::
! 386: ##
! 387: ## ssl.engine = "enable"
! 388: ## ssl.pemfile = "/path/to/server.pem"
! 389: ##
! 390: ## The HTTPS protocol does not allow you to use name-based virtual
! 391: ## hosting with SSL. If you want to run multiple SSL servers with
! 392: ## one lighttpd instance you must use IP-based virtual hosting: ::
! 393: ##
! 394: ## Mitigate CVE-2009-3555 by disabling client triggered renegotation
! 395: ## This is enabled by default.
! 396: ##
! 397: ## IMPORTANT: this setting can only be used in the global scope.
! 398: ## It does *not* work inside conditionals
! 399: ##
! 400: # ssl.disable-client-renegotiation = "enable"
! 401: ##
! 402: ## $SERVER["socket"] == "10.0.0.1:443" {
! 403: ## ssl.engine = "enable"
! 404: ## ssl.pemfile = "/etc/ssl/private/www.example.com.pem"
! 405: ## #
! 406: ## # Mitigate BEAST attack:
! 407: ## #
! 408: ## # A stricter base cipher suite. For details see:
! 409: ## # http://blog.ivanristic.com/2011/10/mitigating-the-beast-attack-on-tls.html
! 410: ## #
! 411: ## ssl.cipher-list = "ECDHE-RSA-AES256-SHA384:AES256-SHA256:RC4-SHA:RC4:HIGH:!MD5:!aNULL:!EDH:!AESGCM"
! 412: ## #
! 413: ## # Make the server prefer the order of the server side cipher suite instead of the client suite.
! 414: ## # This is necessary to mitigate the BEAST attack (unless you disable all non RC4 algorithms).
! 415: ## # This option is enabled by default, but only used if ssl.cipher-list is set.
! 416: ## #
! 417: ## # ssl.honor-cipher-order = "enable"
! 418: ## #
! 419: ## server.name = "www.example.com"
! 420: ##
! 421: ## server.document-root = "/srv/www/vhosts/example.com/www/"
! 422: ## }
! 423: ##
! 424:
! 425: ## If you have a .crt and a .key file, cat them together into a
! 426: ## single PEM file:
! 427: ## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \
! 428: ## > /etc/ssl/private/lighttpd.pem
! 429: ##
! 430: #ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
! 431:
! 432: ##
! 433: ## optionally pass the CA certificate here.
! 434: ##
! 435: ##
! 436: #ssl.ca-file = ""
! 437:
! 438: ##
! 439: #######################################################################
! 440:
! 441: #######################################################################
! 442: ##
! 443: ## custom includes like vhosts.
! 444: ##
! 445: #include "conf.d/config.conf"
! 446: #include_shell "cat /usr/local/etc/lighttpd/vhosts.d/*.conf"
! 447: ##
! 448: #######################################################################
! 449:
! 450: # IPv4 listening socket
! 451: $SERVER["socket"] == "0.0.0.0:80" { }
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to lighttpd.conf.sample CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / lighttpd