1: #######################################################################
2: ##
3: ## /usr/local/etc/lighttpd/lighttpd.conf
4: ##
5: ## check /usr/local/etc/lighttpd/conf.d/*.conf for the configuration of modules.
6: ##
7: #######################################################################
8:
9: #######################################################################
10: ##
11: ## Some Variable definition which will make chrooting easier.
12: ##
13: ## if you add a variable here. Add the corresponding variable in the
14: ## chroot example aswell.
15: ##
16: var.log_root = "/var/log/lighttpd"
17: var.server_root = "/usr/local/www/data"
18: var.state_dir = "/var/run"
19: var.home_dir = "/var/spool/lighttpd"
20: var.conf_dir = "/usr/local/etc/lighttpd"
21:
22: ##
23: ## run the server chrooted.
24: ##
25: ## This requires root permissions during startup.
26: ##
27: ## If you run Chrooted set the the variables to directories relative to
28: ## the chroot dir.
29: ##
30: ## example chroot configuration:
31: ##
32: #var.log_root = "/logs"
33: #var.server_root = "/"
34: #var.state_dir = "/run"
35: #var.home_dir = "/lib/lighttpd"
36: #var.vhosts_dir = "/vhosts"
37: #var.conf_dir = "/etc"
38: #
39: #server.chroot = "/srv/www"
40:
41: ##
42: ## Some additional variables to make the configuration easier
43: ##
44:
45: ##
46: ## Base directory for all virtual hosts
47: ##
48: ## used in:
49: ## conf.d/evhost.conf
50: ## conf.d/simple_vhost.conf
51: ## vhosts.d/vhosts.template
52: ##
53: var.vhosts_dir = server_root + "/vhosts"
54:
55: ##
56: ## Cache for mod_compress
57: ##
58: ## used in:
59: ## conf.d/compress.conf
60: ##
61: var.cache_dir = "/var/cache/lighttpd"
62:
63: ##
64: ## Base directory for sockets.
65: ##
66: ## used in:
67: ## conf.d/fastcgi.conf
68: ## conf.d/scgi.conf
69: ##
70: var.socket_dir = home_dir + "/sockets"
71:
72: ##
73: #######################################################################
74:
75: #######################################################################
76: ##
77: ## Load the modules.
78: include "modules.conf"
79:
80: ##
81: #######################################################################
82:
83: #######################################################################
84: ##
85: ## Basic Configuration
86: ## ---------------------
87: ##
88: server.port = 80
89:
90: ##
91: ## Use IPv6?
92: ##
93: server.use-ipv6 = "enable"
94:
95: ##
96: ## bind to a specific IP
97: ##
98: #server.bind = "localhost"
99:
100: ##
101: ## Run as a different username/groupname.
102: ## This requires root permissions during startup.
103: ##
104: server.username = "www"
105: server.groupname = "www"
106:
107: ##
108: ## enable core files.
109: ##
110: #server.core-files = "disable"
111:
112: ##
113: ## Document root
114: ##
115: server.document-root = "/usr/local/www/data/"
116:
117: ##
118: ## The value for the "Server:" response field.
119: ##
120: ## It would be nice to keep it at "lighttpd".
121: ##
122: #server.tag = "lighttpd"
123:
124: ##
125: ## store a pid file
126: ##
127: server.pid-file = state_dir + "/lighttpd.pid"
128:
129: ##
130: #######################################################################
131:
132: #######################################################################
133: ##
134: ## Logging Options
135: ## ------------------
136: ##
137: ## all logging options can be overwritten per vhost.
138: ##
139: ## Path to the error log file
140: ##
141: server.errorlog = log_root + "/error.log"
142:
143: ##
144: ## If you want to log to syslog you have to unset the
145: ## server.errorlog setting and uncomment the next line.
146: ##
147: #server.errorlog-use-syslog = "enable"
148:
149: ##
150: ## Access log config
151: ##
152: include "conf.d/access_log.conf"
153:
154: ##
155: ## The debug options are moved into their own file.
156: ## see conf.d/debug.conf for various options for request debugging.
157: ##
158: include "conf.d/debug.conf"
159:
160: ##
161: #######################################################################
162:
163: #######################################################################
164: ##
165: ## Tuning/Performance
166: ## --------------------
167: ##
168: ## corresponding documentation:
169: ## http://www.lighttpd.net/documentation/performance.html
170: ##
171: ## set the event-handler (read the performance section in the manual)
172: ##
173: ## possible options on linux are:
174: ##
175: ## select
176: ## poll
177: ## linux-sysepoll
178: ##
179: ## linux-sysepoll is recommended on kernel 2.6.
180: ##
181: server.event-handler = "freebsd-kqueue"
182:
183: ##
184: ## The basic network interface for all platforms at the syscalls read()
185: ## and write(). Every modern OS provides its own syscall to help network
186: ## servers transfer files as fast as possible
187: ##
188: ## linux-sendfile - is recommended for small files.
189: ## writev - is recommended for sending many large files
190: ##
191: server.network-backend = "writev"
192:
193: ##
194: ## As lighttpd is a single-threaded server, its main resource limit is
195: ## the number of file descriptors, which is set to 1024 by default (on
196: ## most systems).
197: ##
198: ## If you are running a high-traffic site you might want to increase this
199: ## limit by setting server.max-fds.
200: ##
201: ## Changing this setting requires root permissions on startup. see
202: ## server.username/server.groupname.
203: ##
204: ## By default lighttpd would not change the operation system default.
205: ## But setting it to 2048 is a better default for busy servers.
206: ##
207: server.max-fds = 2048
208:
209: ##
210: ## Stat() call caching.
211: ##
212: ## lighttpd can utilize FAM/Gamin to cache stat call.
213: ##
214: ## possible values are:
215: ## disable, simple or fam.
216: ##
217: server.stat-cache-engine = "simple"
218:
219: ##
220: ## Fine tuning for the request handling
221: ##
222: ## max-connections == max-fds/2 (maybe /3)
223: ## means the other file handles are used for fastcgi/files
224: ##
225: server.max-connections = 1024
226:
227: ##
228: ## How many seconds to keep a keep-alive connection open,
229: ## until we consider it idle.
230: ##
231: ## Default: 5
232: ##
233: #server.max-keep-alive-idle = 5
234:
235: ##
236: ## How many keep-alive requests until closing the connection.
237: ##
238: ## Default: 16
239: ##
240: #server.max-keep-alive-requests = 16
241:
242: ##
243: ## Maximum size of a request in kilobytes.
244: ## By default it is unlimited (0).
245: ##
246: ## Uploads to your server cant be larger than this value.
247: ##
248: #server.max-request-size = 0
249:
250: ##
251: ## Time to read from a socket before we consider it idle.
252: ##
253: ## Default: 60
254: ##
255: #server.max-read-idle = 60
256:
257: ##
258: ## Time to write to a socket before we consider it idle.
259: ##
260: ## Default: 360
261: ##
262: #server.max-write-idle = 360
263:
264: ##
265: ## Traffic Shaping
266: ## -----------------
267: ##
268: ## see /usr/share/doc/lighttpd/traffic-shaping.txt
269: ##
270: ## Values are in kilobyte per second.
271: ##
272: ## Keep in mind that a limit below 32kB/s might actually limit the
273: ## traffic to 32kB/s. This is caused by the size of the TCP send
274: ## buffer.
275: ##
276: ## per server:
277: ##
278: #server.kbytes-per-second = 128
279:
280: ##
281: ## per connection:
282: ##
283: #connection.kbytes-per-second = 32
284:
285: ##
286: #######################################################################
287:
288: #######################################################################
289: ##
290: ## Filename/File handling
291: ## ------------------------
292:
293: ##
294: ## files to check for if .../ is requested
295: ## index-file.names = ( "index.php", "index.rb", "index.html",
296: ## "index.htm", "default.htm" )
297: ##
298: index-file.names += (
299: "index.xhtml", "index.html", "index.htm", "default.htm", "index.php"
300: )
301:
302: ##
303: ## deny access the file-extensions
304: ##
305: ## ~ is for backupfiles from vi, emacs, joe, ...
306: ## .inc is often used for code includes which should in general not be part
307: ## of the document-root
308: url.access-deny = ( "~", ".inc" )
309:
310: ##
311: ## disable range requests for pdf files
312: ## workaround for a bug in the Acrobat Reader plugin.
313: ##
314: $HTTP["url"] =~ "\.pdf$" {
315: server.range-requests = "disable"
316: }
317:
318: ##
319: ## url handling modules (rewrite, redirect)
320: ##
321: #url.rewrite = ( "^/$" => "/server-status" )
322: #url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" )
323:
324: ##
325: ## both rewrite/redirect support back reference to regex conditional using %n
326: ##
327: #$HTTP["host"] =~ "^www\.(.*)" {
328: # url.redirect = ( "^/(.*)" => "http://%1/$1" )
329: #}
330:
331: ##
332: ## which extensions should not be handle via static-file transfer
333: ##
334: ## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
335: ##
336: static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" )
337:
338: ##
339: ## error-handler for status 404
340: ##
341: #server.error-handler-404 = "/error-handler.html"
342: #server.error-handler-404 = "/error-handler.php"
343:
344: ##
345: ## Format: <errorfile-prefix><status-code>.html
346: ## -> ..../status-404.html for 'File not found'
347: ##
348: #server.errorfile-prefix = "/srv/www/htdocs/errors/status-"
349:
350: ##
351: ## mimetype mapping
352: ##
353: include "conf.d/mime.conf"
354:
355: ##
356: ## directory listing configuration
357: ##
358: include "conf.d/dirlisting.conf"
359:
360: ##
361: ## Should lighttpd follow symlinks?
362: ##
363: server.follow-symlink = "enable"
364:
365: ##
366: ## force all filenames to be lowercase?
367: ##
368: #server.force-lowercase-filenames = "disable"
369:
370: ##
371: ## defaults to /var/tmp as we assume it is a local harddisk
372: ##
373: server.upload-dirs = ( "/var/tmp" )
374:
375: ##
376: #######################################################################
377:
378:
379: #######################################################################
380: ##
381: ## SSL Support
382: ## -------------
383: ##
384: ## To enable SSL for the whole server you have to provide a valid
385: ## certificate and have to enable the SSL engine.::
386: ##
387: ## ssl.engine = "enable"
388: ## ssl.pemfile = "/path/to/server.pem"
389: ##
390: ## The HTTPS protocol does not allow you to use name-based virtual
391: ## hosting with SSL. If you want to run multiple SSL servers with
392: ## one lighttpd instance you must use IP-based virtual hosting: ::
393: ##
394: ## Mitigate CVE-2009-3555 by disabling client triggered renegotation
395: ## This is enabled by default.
396: ##
397: ## IMPORTANT: this setting can only be used in the global scope.
398: ## It does *not* work inside conditionals
399: ##
400: # ssl.disable-client-renegotiation = "enable"
401: ##
402: ## $SERVER["socket"] == "10.0.0.1:443" {
403: ## ssl.engine = "enable"
404: ## ssl.pemfile = "/etc/ssl/private/www.example.com.pem"
405: ## #
406: ## # Mitigate BEAST attack:
407: ## #
408: ## # A stricter base cipher suite. For details see:
409: ## # http://blog.ivanristic.com/2011/10/mitigating-the-beast-attack-on-tls.html
410: ## #
411: ## ssl.cipher-list = "ECDHE-RSA-AES256-SHA384:AES256-SHA256:RC4-SHA:RC4:HIGH:!MD5:!aNULL:!EDH:!AESGCM"
412: ## #
413: ## # Make the server prefer the order of the server side cipher suite instead of the client suite.
414: ## # This is necessary to mitigate the BEAST attack (unless you disable all non RC4 algorithms).
415: ## # This option is enabled by default, but only used if ssl.cipher-list is set.
416: ## #
417: ## # ssl.honor-cipher-order = "enable"
418: ## #
419: ## server.name = "www.example.com"
420: ##
421: ## server.document-root = "/srv/www/vhosts/example.com/www/"
422: ## }
423: ##
424:
425: ## If you have a .crt and a .key file, cat them together into a
426: ## single PEM file:
427: ## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \
428: ## > /etc/ssl/private/lighttpd.pem
429: ##
430: #ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
431:
432: ##
433: ## optionally pass the CA certificate here.
434: ##
435: ##
436: #ssl.ca-file = ""
437:
438: ##
439: #######################################################################
440:
441: #######################################################################
442: ##
443: ## custom includes like vhosts.
444: ##
445: #include "conf.d/config.conf"
446: #include_shell "cat /usr/local/etc/lighttpd/vhosts.d/*.conf"
447: ##
448: #######################################################################
449:
450: # IPv4 listening socket
451: $SERVER["socket"] == "0.0.0.0:80" { }
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to lighttpd.conf.sample CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / lighttpd