Annotation of elwix/config/etc/default/login.conf, revision 1.1.1.1
1.1 misho 1: # login.conf - login class capabilities database.
2: #
3: # Remember to rebuild the database after each change to this file:
4: #
5: # cap_mkdb /etc/login.conf
6: #
7: # This file controls resource limits, accounting limits and
8: # default user environment settings.
9: #
10: # $FreeBSD: src/etc/login.conf,v 1.53 2009/06/23 20:57:27 kib Exp $
11: #
12:
13: # Default settings effectively disable resource limits, see the
14: # examples below for a starting point to enable them.
15:
16: # defaults
17: # These settings are used by login(1) by default for classless users
18: # Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
19: #
20: # Note that since a colon ':' is used to separate capability entries,
21: # a \c escape sequence must be used to embed a literal colon in the
22: # value or name of a capability (see the ``CGETNUM AND CGETSTR SYNTAX
23: # AND SEMANTICS'' section of getcap(3) for more escape sequences).
24:
25: default:\
26: :passwd_format=md5:\
27: :copyright=/etc/COPYRIGHT:\
28: :welcome=/etc/motd:\
29: :setenv=MAIL=/var/mail/$,BLOCKSIZE=K,FTP_PASSIVE_MODE=YES:\
30: :path=/sbin /bin /usr/sbin /usr/bin /usr/games /usr/local/sbin /usr/local/bin ~/bin:\
31: :nologin=/var/run/nologin:\
32: :cputime=unlimited:\
33: :datasize=unlimited:\
34: :stacksize=unlimited:\
35: :memorylocked=unlimited:\
36: :memoryuse=unlimited:\
37: :filesize=unlimited:\
38: :coredumpsize=unlimited:\
39: :openfiles=unlimited:\
40: :maxproc=unlimited:\
41: :sbsize=unlimited:\
42: :vmemoryuse=unlimited:\
43: :swapuse=unlimited:\
44: :pseudoterminals=unlimited:\
45: :priority=0:\
46: :ignoretime@:\
47: :umask=022:
48:
49:
50: #
51: # A collection of common class names - forward them all to 'default'
52: # (login would normally do this anyway, but having a class name
53: # here suppresses the diagnostic)
54: #
55: standard:\
56: :tc=default:
57: xuser:\
58: :tc=default:
59: staff:\
60: :tc=default:
61: daemon:\
62: :tc=default:
63: news:\
64: :tc=default:
65: dialer:\
66: :tc=default:
67:
68: #
69: # Root can always login
70: #
71: # N.B. login_getpwclass(3) will use this entry for the root account,
72: # in preference to 'default'.
73: root:\
74: :ignorenologin:\
75: :tc=default:
76:
77: #
78: # Russian Users Accounts. Setup proper environment variables.
79: #
80: russian|Russian Users Accounts:\
81: :charset=KOI8-R:\
82: :lang=ru_RU.KOI8-R:\
83: :tc=default:
84:
85:
86: ######################################################################
87: ######################################################################
88: ##
89: ## Example entries
90: ##
91: ######################################################################
92: ######################################################################
93:
94: ## Example defaults
95: ## These settings are used by login(1) by default for classless users
96: ## Note that entries like "cputime" set both "cputime-cur" and "cputime-max"
97: #
98: #default:\
99: # :cputime=infinity:\
100: # :datasize-cur=22M:\
101: # :stacksize-cur=8M:\
102: # :memorylocked-cur=10M:\
103: # :memoryuse-cur=30M:\
104: # :filesize=infinity:\
105: # :coredumpsize=infinity:\
106: # :maxproc-cur=64:\
107: # :openfiles-cur=64:\
108: # :priority=0:\
109: # :requirehome@:\
110: # :umask=022:\
111: # :tc=auth-defaults:
112: #
113: #
114: ##
115: ## standard - standard user defaults
116: ##
117: #standard:\
118: # :copyright=/etc/COPYRIGHT:\
119: # :welcome=/etc/motd:\
120: # :setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
121: # :path=~/bin /bin /usr/bin /usr/local/bin:\
122: # :manpath=/usr/share/man /usr/local/man:\
123: # :nologin=/var/run/nologin:\
124: # :cputime=1h30m:\
125: # :datasize=8M:\
126: # :vmemoryuse=100M:\
127: # :stacksize=2M:\
128: # :memorylocked=4M:\
129: # :memoryuse=8M:\
130: # :filesize=8M:\
131: # :coredumpsize=8M:\
132: # :openfiles=24:\
133: # :maxproc=32:\
134: # :priority=0:\
135: # :requirehome:\
136: # :passwordtime=90d:\
137: # :umask=002:\
138: # :ignoretime@:\
139: # :tc=default:
140: #
141: #
142: ##
143: ## users of X (needs more resources!)
144: ##
145: #xuser:\
146: # :manpath=/usr/share/man /usr/local/man:\
147: # :cputime=4h:\
148: # :datasize=12M:\
149: # :vmemoryuse=infinity:\
150: # :stacksize=4M:\
151: # :filesize=8M:\
152: # :memoryuse=16M:\
153: # :openfiles=32:\
154: # :maxproc=48:\
155: # :tc=standard:
156: #
157: #
158: ##
159: ## Staff users - few restrictions and allow login anytime
160: ##
161: #staff:\
162: # :ignorenologin:\
163: # :ignoretime:\
164: # :requirehome@:\
165: # :accounted@:\
166: # :path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
167: # :umask=022:\
168: # :tc=standard:
169: #
170: #
171: ##
172: ## root - fallback for root logins
173: ##
174: #root:\
175: # :path=~/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
176: # :cputime=infinity:\
177: # :datasize=infinity:\
178: # :stacksize=infinity:\
179: # :memorylocked=infinity:\
180: # :memoryuse=infinity:\
181: # :filesize=infinity:\
182: # :coredumpsize=infinity:\
183: # :openfiles=infinity:\
184: # :maxproc=infinity:\
185: # :memoryuse-cur=32M:\
186: # :maxproc-cur=64:\
187: # :openfiles-cur=1024:\
188: # :priority=0:\
189: # :requirehome@:\
190: # :umask=022:\
191: # :tc=auth-root-defaults:
192: #
193: #
194: ##
195: ## Settings used by /etc/rc
196: ##
197: #daemon:\
198: # :coredumpsize@:\
199: # :coredumpsize-cur=0:\
200: # :datasize=infinity:\
201: # :datasize-cur@:\
202: # :maxproc=512:\
203: # :maxproc-cur@:\
204: # :memoryuse-cur=64M:\
205: # :memorylocked-cur=64M:\
206: # :openfiles=1024:\
207: # :openfiles-cur@:\
208: # :stacksize=16M:\
209: # :stacksize-cur@:\
210: # :tc=default:
211: #
212: #
213: ##
214: ## Settings used by news subsystem
215: ##
216: #news:\
217: # :path=/usr/local/news/bin /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin:\
218: # :cputime=infinity:\
219: # :filesize=128M:\
220: # :datasize-cur=64M:\
221: # :stacksize-cur=32M:\
222: # :coredumpsize-cur=0:\
223: # :maxmemorysize-cur=128M:\
224: # :memorylocked=32M:\
225: # :maxproc=128:\
226: # :openfiles=256:\
227: # :tc=default:
228: #
229: #
230: ##
231: ## The dialer class should be used for a dialup PPP/SLIP accounts
232: ## Welcome messages/news suppressed
233: ##
234: #dialer:\
235: # :hushlogin:\
236: # :requirehome@:\
237: # :cputime=unlimited:\
238: # :filesize=2M:\
239: # :datasize=2M:\
240: # :stacksize=4M:\
241: # :coredumpsize=0:\
242: # :memoryuse=4M:\
243: # :memorylocked=1M:\
244: # :maxproc=16:\
245: # :openfiles=32:\
246: # :tc=standard:
247: #
248: #
249: ##
250: ## Site full-time 24/7 PPP/SLIP connections
251: ## - no time accounting, restricted to access via dialin lines
252: ##
253: #site:\
254: # :ignoretime:\
255: # :passwordtime@:\
256: # :refreshtime@:\
257: # :refreshperiod@:\
258: # :sessionlimit@:\
259: # :autodelete@:\
260: # :expireperiod@:\
261: # :graceexpire@:\
262: # :gracetime@:\
263: # :warnexpire@:\
264: # :warnpassword@:\
265: # :idletime@:\
266: # :sessiontime@:\
267: # :daytime@:\
268: # :weektime@:\
269: # :monthtime@:\
270: # :warntime@:\
271: # :accounted@:\
272: # :tc=dialer:\
273: # :tc=staff:
274: #
275: #
276: ##
277: ## Example standard accounting entries for subscriber levels
278: ##
279: #
280: #subscriber|Subscribers:\
281: # :accounted:\
282: # :refreshtime=180d:\
283: # :refreshperiod@:\
284: # :sessionlimit@:\
285: # :autodelete=30d:\
286: # :expireperiod=180d:\
287: # :graceexpire=7d:\
288: # :gracetime=10m:\
289: # :warnexpire=7d:\
290: # :warnpassword=7d:\
291: # :idletime=30m:\
292: # :sessiontime=4h:\
293: # :daytime=6h:\
294: # :weektime=40h:\
295: # :monthtime=120h:\
296: # :warntime=4h:\
297: # :tc=standard:
298: #
299: #
300: ##
301: ## Subscriber accounts. These accounts have their login times
302: ## accounted and have access limits applied.
303: ##
304: #subppp|PPP Subscriber Accounts:\
305: # :tc=dialer:\
306: # :tc=subscriber:
307: #
308: #
309: #subslip|SLIP Subscriber Accounts:\
310: # :tc=dialer:\
311: # :tc=subscriber:
312: #
313: #
314: #subshell|Shell Subscriber Accounts:\
315: # :tc=subscriber:
316: #
317: ##
318: ## If you want some of the accounts to use traditional UNIX DES based
319: ## password hashes.
320: ##
321: #des_users:\
322: # :passwd_format=des:\
323: # :tc=default:
324: authpf:\
325: :welcome=/etc/motd.authpf:shell=/usr/sbin/authpf:\
326: :tc=default:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to login.conf CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default