Return to miniupnpd.conf.sample CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

Annotation of elwix/config/etc/default/miniupnpd.conf.sample, revision 1.1

1.1     ! misho       1: # WAN network interface
        !             2: ext_ifname=ed0
        !             3: # if the WAN interface has several IP addresses, you
        !             4: # can specify the one to use below
        !             5: #ext_ip=
        !             6: 
        !             7: # there can be multiple listening ips for receiving SSDP traffic.
        !             8: # the 1st IP is also used for UPnP Soap traffic.
        !             9: #listening_ip= 192.168.0.61 
        !            10: listening_ip=10.0.2.1
        !            11: 
        !            12: # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
        !            13: port=5555
        !            14: 
        !            15: # path to the unix socket used to communicate with MiniSSDPd
        !            16: # If running, MiniSSDPd will manage M-SEARCH answering.
        !            17: # default is /var/run/minissdpd.sock
        !            18: #minissdpdsocket=/var/run/minissdpd.sock
        !            19: 
        !            20: # enable NAT-PMP support (default is no)
        !            21: #enable_natpmp=no
        !            22: 
        !            23: # lease file location
        !            24: #lease_file=/var/log/upnp.leases
        !            25: 
        !            26: # bitrates reported by daemon in bits per second
        !            27: bitrate_up=131072
        !            28: bitrate_down=524288
        !            29: 
        !            30: # "secure" mode : when enabled, UPnP client are allowed to add mappings only
        !            31: # to their IP. (default is yes)
        !            32: #secure_mode=yes
        !            33: 
        !            34: # default presentation url is http address on port 80
        !            35: #presentation_url=
        !            36: 
        !            37: # report system uptime instead of daemon uptime
        !            38: system_uptime=yes
        !            39: 
        !            40: # unused rules cleaning.
        !            41: # never remove any rule before this threshold for the number
        !            42: # of redirections is exceeded. default to 20
        !            43: #clean_ruleset_threshold=10
        !            44: # clean process work interval in seconds. default to 0 (disabled).
        !            45: # a 600 seconds (10 minutes) interval makes sense
        !            46: clean_ruleset_interval=600
        !            47: 
        !            48: # notify interval in seconds default is 30 seconds.
        !            49: #notify_interval=240
        !            50: 
        !            51: # log packets in pf
        !            52: #packet_log=no
        !            53: # ALTQ queue in pf
        !            54: # filter rules must be used for this to be used.
        !            55: # compile with PF_ENABLE_FILTER_RULES (see config.h file)
        !            56: #queue=queue_name1
        !            57: 
        !            58: # uuid : generated by the install a new one can be created with
        !            59: # uuidgen
        !            60: uuid=9db6dc04-5a13-11df-be4d-001a4b8df55b
        !            61: 
        !            62: # UPnP permission rules
        !            63: # (allow|deny) (external port range) ip/mask (internal port range)
        !            64: # A port range is <min port>-<max port> or <port> if there is only
        !            65: # one port in the range.
        !            66: # ip/mask format must be nn.nn.nn.nn/nn
        !            67: allow 1024-65535 10.0.2.0/24 1024-65535
        !            68: allow 1024-65535 10.0.2.0/24 1024-65535
        !            69: deny 0-65535 0.0.0.0/0 0-65535
        !            70: