Return to miniupnpd.conf.sample CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

Annotation of elwix/config/etc/default/miniupnpd.conf.sample, revision 1.1.1.1

1.1       misho       1: # WAN network interface
                      2: ext_ifname=ed0
                      3: # if the WAN interface has several IP addresses, you
                      4: # can specify the one to use below
                      5: #ext_ip=
                      6: 
                      7: # there can be multiple listening ips for receiving SSDP traffic.
                      8: # the 1st IP is also used for UPnP Soap traffic.
                      9: #listening_ip= 192.168.0.61 
                     10: listening_ip=10.0.2.1
                     11: 
                     12: # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
                     13: port=5555
                     14: 
                     15: # path to the unix socket used to communicate with MiniSSDPd
                     16: # If running, MiniSSDPd will manage M-SEARCH answering.
                     17: # default is /var/run/minissdpd.sock
                     18: #minissdpdsocket=/var/run/minissdpd.sock
                     19: 
                     20: # enable NAT-PMP support (default is no)
                     21: #enable_natpmp=no
                     22: 
                     23: # lease file location
                     24: #lease_file=/var/log/upnp.leases
                     25: 
                     26: # bitrates reported by daemon in bits per second
                     27: bitrate_up=131072
                     28: bitrate_down=524288
                     29: 
                     30: # "secure" mode : when enabled, UPnP client are allowed to add mappings only
                     31: # to their IP. (default is yes)
                     32: #secure_mode=yes
                     33: 
                     34: # default presentation url is http address on port 80
                     35: #presentation_url=
                     36: 
                     37: # report system uptime instead of daemon uptime
                     38: system_uptime=yes
                     39: 
                     40: # unused rules cleaning.
                     41: # never remove any rule before this threshold for the number
                     42: # of redirections is exceeded. default to 20
                     43: #clean_ruleset_threshold=10
                     44: # clean process work interval in seconds. default to 0 (disabled).
                     45: # a 600 seconds (10 minutes) interval makes sense
                     46: clean_ruleset_interval=600
                     47: 
                     48: # notify interval in seconds default is 30 seconds.
                     49: #notify_interval=240
                     50: 
                     51: # log packets in pf
                     52: #packet_log=no
                     53: # ALTQ queue in pf
                     54: # filter rules must be used for this to be used.
                     55: # compile with PF_ENABLE_FILTER_RULES (see config.h file)
                     56: #queue=queue_name1
                     57: 
                     58: # uuid : generated by the install a new one can be created with
                     59: # uuidgen
                     60: uuid=9db6dc04-5a13-11df-be4d-001a4b8df55b
                     61: 
                     62: # UPnP permission rules
                     63: # (allow|deny) (external port range) ip/mask (internal port range)
                     64: # A port range is <min port>-<max port> or <port> if there is only
                     65: # one port in the range.
                     66: # ip/mask format must be nn.nn.nn.nn/nn
                     67: allow 1024-65535 10.0.2.0/24 1024-65535
                     68: allow 1024-65535 10.0.2.0/24 1024-65535
                     69: deny 0-65535 0.0.0.0/0 0-65535
                     70: