[BACK]Return to miniupnpd.conf.sample CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default
File:  [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / miniupnpd.conf.sample
Revision 1.1.1.1 (vendor branch): download - view: text, annotated - select for diffs - revision graph
Tue Jul 5 23:43:00 2011 UTC (13 years, 3 months ago) by misho
Branches: misho, MAIN
CVS tags: start, elwix2_8, elwix2_7, elwix2_6, elwix2_3, elwix2_2, elwix2_1, elwix2_0, elwix1_9_mips, elwix1_9, elwix1_8, elwix1_7, elwix1_6, elwix1_5, elwix1_4, Patch1, HEAD, ELWIX2_7, ELWIX2_6, ELWIX2_5, ELWIX2_2p0, ELWIX2_1, ELWIX2_0, ELWIX1_9, ELWIX1_8, ELWIX1_7, ELWIX1_6, ELWIX1_5
ELWIX project

    1: # WAN network interface
    2: ext_ifname=ed0
    3: # if the WAN interface has several IP addresses, you
    4: # can specify the one to use below
    5: #ext_ip=
    6: 
    7: # there can be multiple listening ips for receiving SSDP traffic.
    8: # the 1st IP is also used for UPnP Soap traffic.
    9: #listening_ip= 192.168.0.61 
   10: listening_ip=10.0.2.1
   11: 
   12: # port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
   13: port=5555
   14: 
   15: # path to the unix socket used to communicate with MiniSSDPd
   16: # If running, MiniSSDPd will manage M-SEARCH answering.
   17: # default is /var/run/minissdpd.sock
   18: #minissdpdsocket=/var/run/minissdpd.sock
   19: 
   20: # enable NAT-PMP support (default is no)
   21: #enable_natpmp=no
   22: 
   23: # lease file location
   24: #lease_file=/var/log/upnp.leases
   25: 
   26: # bitrates reported by daemon in bits per second
   27: bitrate_up=131072
   28: bitrate_down=524288
   29: 
   30: # "secure" mode : when enabled, UPnP client are allowed to add mappings only
   31: # to their IP. (default is yes)
   32: #secure_mode=yes
   33: 
   34: # default presentation url is http address on port 80
   35: #presentation_url=
   36: 
   37: # report system uptime instead of daemon uptime
   38: system_uptime=yes
   39: 
   40: # unused rules cleaning.
   41: # never remove any rule before this threshold for the number
   42: # of redirections is exceeded. default to 20
   43: #clean_ruleset_threshold=10
   44: # clean process work interval in seconds. default to 0 (disabled).
   45: # a 600 seconds (10 minutes) interval makes sense
   46: clean_ruleset_interval=600
   47: 
   48: # notify interval in seconds default is 30 seconds.
   49: #notify_interval=240
   50: 
   51: # log packets in pf
   52: #packet_log=no
   53: # ALTQ queue in pf
   54: # filter rules must be used for this to be used.
   55: # compile with PF_ENABLE_FILTER_RULES (see config.h file)
   56: #queue=queue_name1
   57: 
   58: # uuid : generated by the install a new one can be created with
   59: # uuidgen
   60: uuid=9db6dc04-5a13-11df-be4d-001a4b8df55b
   61: 
   62: # UPnP permission rules
   63: # (allow|deny) (external port range) ip/mask (internal port range)
   64: # A port range is <min port>-<max port> or <port> if there is only
   65: # one port in the range.
   66: # ip/mask format must be nn.nn.nn.nn/nn
   67: allow 1024-65535 10.0.2.0/24 1024-65535
   68: allow 1024-65535 10.0.2.0/24 1024-65535
   69: deny 0-65535 0.0.0.0/0 0-65535
   70:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>