Return to ppp.conf CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / ppp

Annotation of elwix/config/etc/default/ppp/ppp.conf, revision 1.1

1.1     ! misho       1: #################################################################
        !             2: # PPP  Sample Configuration File
        !             3: # Originally written by Toshiharu OHNO
        !             4: # Simplified 5/14/1999 by wself@cdrom.com
        !             5: #
        !             6: # See /usr/share/examples/ppp/ for some examples
        !             7: #
        !             8: # $FreeBSD: src/etc/ppp/ppp.conf,v 1.11 2008/07/19 20:00:18 marcel Exp $
        !             9: #################################################################
        !            10: 
        !            11: default:
        !            12:  set log Phase Chat LCP IPCP CCP tun command
        !            13:  ident elwix (built COMPILATIONDATE)
        !            14: 
        !            15:  # Ensure that "device" references the correct serial port
        !            16:  # for your modem. (cuau0 = COM1, cuau1 = COM2)
        !            17:  #
        !            18:  set device /dev/cuau1
        !            19: 
        !            20:  set speed 115200
        !            21:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
        !            22:            \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
        !            23:  set timeout 180                       # 3 minute idle timer (the default)
        !            24:  enable dns                            # request DNS info (for resolv.conf)
        !            25:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0
        !            26:  set redial 15 0
        !            27:  set reconnect 15 28800
        !            28: 
        !            29: papchap:
        !            30:  #
        !            31:  # edit the next three lines and replace the items in caps with
        !            32:  # the values which have been assigned by your ISP.
        !            33:  #
        !            34: 
        !            35:  set phone PHONE_NUM
        !            36:  set authname USERNAME
        !            37:  set authkey PASSWORD
        !            38: 
        !            39:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
        !            40:  add default HISADDR                   # Add a (sticky) default route
        !            41: 
        !            42: ###############################################################################
        !            43: 
        !            44: radius:
        !            45:  set radius /etc/ppp/radius.conf
        !            46:  set rad_alive 300
        !            47:  set rad_port_id tunnum
        !            48: 
        !            49: pppoed:
        !            50: # set log Chat Command Phase
        !            51:  set log Phase Chat LCP IPCP CCP tun command
        !            52:  load radius
        !            53: # enable pap
        !            54:  enable chap
        !            55:  allow mode direct
        !            56:  enable proxy
        !            57:  disable ipv6cp
        !            58:  set mtu 1492
        !            59:  set mru 1492
        !            60:  set ifaddr 10.0.0.1 10.0.1.1-10.0.2.254 255.255.255.255
        !            61:  set speed sync
        !            62:  set timeout 0
        !            63:  enable echo
        !            64:  enable lqr
        !            65:  accept lqr
        !            66:  accept dns
        !            67: 
        !            68: ###############################################################################
        !            69: 
        !            70: mtel:
        !            71:  enable force-scripts
        !            72:  # MTEL GPRS/EDGE
        !            73:  set phone "*99***1#"
        !            74:  # MTEL CSD
        !            75:  #set phone "+359 88 1000"
        !            76: 
        !            77:  set timeout 300
        !            78:  enable dns
        !            79:  resolv rewrite
        !            80:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
        !            81:  add default HISADDR
        !            82: 
        !            83: rfcomm:
        !            84:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
        !            85:         \"\" AT OK-AT-OK ATE1Q0 OK \
        !            86:         AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
        !            87:         \\dATDT\\T TIMEOUT 40 CONNECT"
        !            88:  load mtel
        !            89: 
        !            90: 3g-pin:
        !            91:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
        !            92:         \"\" AT OK-AT-OK ATE1Q0 OK \
        !            93:         AT+CPIN=0000 +ZEND \
        !            94:         AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
        !            95:         \\dATDT\\T TIMEOUT 40 CONNECT"
        !            96:  load mtel
        !            97:  set device /dev/ttyU0.2
        !            98:  dial
        !            99: 
        !           100: 3g:
        !           101:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
        !           102:         \"\" AT OK-AT-OK ATE1Q0 OK \
        !           103:         AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
        !           104:         \\dATDT\\T TIMEOUT 40 CONNECT"
        !           105:  load mtel
        !           106:  set device /dev/ttyU0.2
        !           107:  dial
        !           108: 
        !           109: 
        !           110: 
        !           111: pppoe_client:
        !           112:  set device PPPoE:fxp0:aitnet_AC
        !           113:  set speed sync
        !           114:  set mtu 1492
        !           115:  set mru 1492
        !           116:  enable lqr
        !           117:  set lqrperiod 5
        !           118:  set timeout 0
        !           119:  set authname testuser
        !           120:  set authkey testpass
        !           121:  set dial
        !           122:  set login
        !           123:  add default HISADDR
        !           124: 
        !           125: pptp_client:
        !           126:  set speed sync
        !           127:  enable lqr
        !           128:  set lqrperiod 5
        !           129:  set timeout 0
        !           130:  set authname testuser
        !           131:  set authkey testpass
        !           132:  set dial
        !           133:  set login
        !           134:  add default HISADDR