Return to ppp.conf CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / ppp

Annotation of elwix/config/etc/default/ppp/ppp.conf, revision 1.1.1.1

1.1       misho       1: #################################################################
                      2: # PPP  Sample Configuration File
                      3: # Originally written by Toshiharu OHNO
                      4: # Simplified 5/14/1999 by wself@cdrom.com
                      5: #
                      6: # See /usr/share/examples/ppp/ for some examples
                      7: #
                      8: # $FreeBSD: src/etc/ppp/ppp.conf,v 1.11 2008/07/19 20:00:18 marcel Exp $
                      9: #################################################################
                     10: 
                     11: default:
                     12:  set log Phase Chat LCP IPCP CCP tun command
                     13:  ident elwix (built COMPILATIONDATE)
                     14: 
                     15:  # Ensure that "device" references the correct serial port
                     16:  # for your modem. (cuau0 = COM1, cuau1 = COM2)
                     17:  #
                     18:  set device /dev/cuau1
                     19: 
                     20:  set speed 115200
                     21:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
                     22:            \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
                     23:  set timeout 180                       # 3 minute idle timer (the default)
                     24:  enable dns                            # request DNS info (for resolv.conf)
                     25:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0
                     26:  set redial 15 0
                     27:  set reconnect 15 28800
                     28: 
                     29: papchap:
                     30:  #
                     31:  # edit the next three lines and replace the items in caps with
                     32:  # the values which have been assigned by your ISP.
                     33:  #
                     34: 
                     35:  set phone PHONE_NUM
                     36:  set authname USERNAME
                     37:  set authkey PASSWORD
                     38: 
                     39:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
                     40:  add default HISADDR                   # Add a (sticky) default route
                     41: 
                     42: ###############################################################################
                     43: 
                     44: radius:
                     45:  set radius /etc/ppp/radius.conf
                     46:  set rad_alive 300
                     47:  set rad_port_id tunnum
                     48: 
                     49: pppoed:
                     50: # set log Chat Command Phase
                     51:  set log Phase Chat LCP IPCP CCP tun command
                     52:  load radius
                     53: # enable pap
                     54:  enable chap
                     55:  allow mode direct
                     56:  enable proxy
                     57:  disable ipv6cp
                     58:  set mtu 1492
                     59:  set mru 1492
                     60:  set ifaddr 10.0.0.1 10.0.1.1-10.0.2.254 255.255.255.255
                     61:  set speed sync
                     62:  set timeout 0
                     63:  enable echo
                     64:  enable lqr
                     65:  accept lqr
                     66:  accept dns
                     67: 
                     68: ###############################################################################
                     69: 
                     70: mtel:
                     71:  enable force-scripts
                     72:  # MTEL GPRS/EDGE
                     73:  set phone "*99***1#"
                     74:  # MTEL CSD
                     75:  #set phone "+359 88 1000"
                     76: 
                     77:  set timeout 300
                     78:  enable dns
                     79:  resolv rewrite
                     80:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
                     81:  add default HISADDR
                     82: 
                     83: rfcomm:
                     84:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
                     85:         \"\" AT OK-AT-OK ATE1Q0 OK \
                     86:         AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
                     87:         \\dATDT\\T TIMEOUT 40 CONNECT"
                     88:  load mtel
                     89: 
                     90: 3g-pin:
                     91:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
                     92:         \"\" AT OK-AT-OK ATE1Q0 OK \
                     93:         AT+CPIN=0000 +ZEND \
                     94:         AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
                     95:         \\dATDT\\T TIMEOUT 40 CONNECT"
                     96:  load mtel
                     97:  set device /dev/ttyU0.2
                     98:  dial
                     99: 
                    100: 3g:
                    101:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
                    102:         \"\" AT OK-AT-OK ATE1Q0 OK \
                    103:         AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
                    104:         \\dATDT\\T TIMEOUT 40 CONNECT"
                    105:  load mtel
                    106:  set device /dev/ttyU0.2
                    107:  dial
                    108: 
                    109: 
                    110: 
                    111: pppoe_client:
                    112:  set device PPPoE:fxp0:aitnet_AC
                    113:  set speed sync
                    114:  set mtu 1492
                    115:  set mru 1492
                    116:  enable lqr
                    117:  set lqrperiod 5
                    118:  set timeout 0
                    119:  set authname testuser
                    120:  set authkey testpass
                    121:  set dial
                    122:  set login
                    123:  add default HISADDR
                    124: 
                    125: pptp_client:
                    126:  set speed sync
                    127:  enable lqr
                    128:  set lqrperiod 5
                    129:  set timeout 0
                    130:  set authname testuser
                    131:  set authkey testpass
                    132:  set dial
                    133:  set login
                    134:  add default HISADDR