[BACK]Return to ppp.conf CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / ppp
File:  [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / ppp / ppp.conf
Revision 1.1.1.1 (vendor branch): download - view: text, annotated - select for diffs - revision graph
Tue Jul 5 23:43:00 2011 UTC (13 years ago) by misho
Branches: misho, MAIN
CVS tags: start, elwix2_8, elwix2_7, elwix2_6, elwix2_3, elwix2_2, elwix2_1, elwix2_0, elwix1_9_mips, elwix1_9, elwix1_8, elwix1_7, elwix1_6, elwix1_5, elwix1_4, Patch1, HEAD, ELWIX2_7, ELWIX2_6, ELWIX2_5, ELWIX2_2p0, ELWIX2_1, ELWIX2_0, ELWIX1_9, ELWIX1_8, ELWIX1_7, ELWIX1_6, ELWIX1_5
ELWIX project

    1: #################################################################
    2: # PPP  Sample Configuration File
    3: # Originally written by Toshiharu OHNO
    4: # Simplified 5/14/1999 by wself@cdrom.com
    5: #
    6: # See /usr/share/examples/ppp/ for some examples
    7: #
    8: # $FreeBSD: src/etc/ppp/ppp.conf,v 1.11 2008/07/19 20:00:18 marcel Exp $
    9: #################################################################
   10: 
   11: default:
   12:  set log Phase Chat LCP IPCP CCP tun command
   13:  ident elwix (built COMPILATIONDATE)
   14: 
   15:  # Ensure that "device" references the correct serial port
   16:  # for your modem. (cuau0 = COM1, cuau1 = COM2)
   17:  #
   18:  set device /dev/cuau1
   19: 
   20:  set speed 115200
   21:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
   22:            \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
   23:  set timeout 180			# 3 minute idle timer (the default)
   24:  enable dns				# request DNS info (for resolv.conf)
   25:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0
   26:  set redial 15 0
   27:  set reconnect 15 28800
   28: 
   29: papchap:
   30:  #
   31:  # edit the next three lines and replace the items in caps with
   32:  # the values which have been assigned by your ISP.
   33:  #
   34: 
   35:  set phone PHONE_NUM
   36:  set authname USERNAME
   37:  set authkey PASSWORD
   38: 
   39:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
   40:  add default HISADDR			# Add a (sticky) default route
   41: 
   42: ###############################################################################
   43: 
   44: radius:
   45:  set radius /etc/ppp/radius.conf
   46:  set rad_alive 300
   47:  set rad_port_id tunnum
   48: 
   49: pppoed:
   50: # set log Chat Command Phase
   51:  set log Phase Chat LCP IPCP CCP tun command
   52:  load radius
   53: # enable pap
   54:  enable chap
   55:  allow mode direct
   56:  enable proxy
   57:  disable ipv6cp
   58:  set mtu 1492
   59:  set mru 1492
   60:  set ifaddr 10.0.0.1 10.0.1.1-10.0.2.254 255.255.255.255
   61:  set speed sync
   62:  set timeout 0
   63:  enable echo
   64:  enable lqr
   65:  accept lqr
   66:  accept dns
   67: 
   68: ###############################################################################
   69: 
   70: mtel:
   71:  enable force-scripts
   72:  # MTEL GPRS/EDGE
   73:  set phone "*99***1#"
   74:  # MTEL CSD
   75:  #set phone "+359 88 1000"
   76: 
   77:  set timeout 300
   78:  enable dns
   79:  resolv rewrite
   80:  set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
   81:  add default HISADDR
   82: 
   83: rfcomm:
   84:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
   85: 	 \"\" AT OK-AT-OK ATE1Q0 OK \
   86: 	 AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
   87: 	 \\dATDT\\T TIMEOUT 40 CONNECT"
   88:  load mtel
   89: 
   90: 3g-pin:
   91:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
   92: 	 \"\" AT OK-AT-OK ATE1Q0 OK \
   93: 	 AT+CPIN=0000 +ZEND \
   94: 	 AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
   95: 	 \\dATDT\\T TIMEOUT 40 CONNECT"
   96:  load mtel
   97:  set device /dev/ttyU0.2
   98:  dial
   99: 
  100: 3g:
  101:  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
  102: 	 \"\" AT OK-AT-OK ATE1Q0 OK \
  103: 	 AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
  104: 	 \\dATDT\\T TIMEOUT 40 CONNECT"
  105:  load mtel
  106:  set device /dev/ttyU0.2
  107:  dial
  108: 
  109: 
  110: 
  111: pppoe_client:
  112:  set device PPPoE:fxp0:aitnet_AC
  113:  set speed sync
  114:  set mtu 1492
  115:  set mru 1492
  116:  enable lqr
  117:  set lqrperiod 5
  118:  set timeout 0
  119:  set authname testuser
  120:  set authkey testpass
  121:  set dial
  122:  set login
  123:  add default HISADDR
  124: 
  125: pptp_client:
  126:  set speed sync
  127:  enable lqr
  128:  set lqrperiod 5
  129:  set timeout 0
  130:  set authname testuser
  131:  set authkey testpass
  132:  set dial
  133:  set login
  134:  add default HISADDR
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>