[BACK]Return to ppp.conf CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / ppp
File:  [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default / ppp / ppp.conf
Revision 1.1.1.1 (vendor branch): download - view: text, annotated - select for diffs - revision graph
Tue Jul 5 23:43:00 2011 UTC (13 years ago) by misho
Branches: misho, MAIN
CVS tags: start, elwix2_8, elwix2_7, elwix2_6, elwix2_3, elwix2_2, elwix2_1, elwix2_0, elwix1_9_mips, elwix1_9, elwix1_8, elwix1_7, elwix1_6, elwix1_5, elwix1_4, Patch1, HEAD, ELWIX2_7, ELWIX2_6, ELWIX2_5, ELWIX2_2p0, ELWIX2_1, ELWIX2_0, ELWIX1_9, ELWIX1_8, ELWIX1_7, ELWIX1_6, ELWIX1_5
ELWIX project

#################################################################
# PPP  Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.11 2008/07/19 20:00:18 marcel Exp $
#################################################################

default:
 set log Phase Chat LCP IPCP CCP tun command
 ident elwix (built COMPILATIONDATE)

 # Ensure that "device" references the correct serial port
 # for your modem. (cuau0 = COM1, cuau1 = COM2)
 #
 set device /dev/cuau1

 set speed 115200
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
           \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
 set timeout 180			# 3 minute idle timer (the default)
 enable dns				# request DNS info (for resolv.conf)
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0
 set redial 15 0
 set reconnect 15 28800

papchap:
 #
 # edit the next three lines and replace the items in caps with
 # the values which have been assigned by your ISP.
 #

 set phone PHONE_NUM
 set authname USERNAME
 set authkey PASSWORD

 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 add default HISADDR			# Add a (sticky) default route

###############################################################################

radius:
 set radius /etc/ppp/radius.conf
 set rad_alive 300
 set rad_port_id tunnum

pppoed:
# set log Chat Command Phase
 set log Phase Chat LCP IPCP CCP tun command
 load radius
# enable pap
 enable chap
 allow mode direct
 enable proxy
 disable ipv6cp
 set mtu 1492
 set mru 1492
 set ifaddr 10.0.0.1 10.0.1.1-10.0.2.254 255.255.255.255
 set speed sync
 set timeout 0
 enable echo
 enable lqr
 accept lqr
 accept dns

###############################################################################

mtel:
 enable force-scripts
 # MTEL GPRS/EDGE
 set phone "*99***1#"
 # MTEL CSD
 #set phone "+359 88 1000"

 set timeout 300
 enable dns
 resolv rewrite
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 add default HISADDR

rfcomm:
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
	 \"\" AT OK-AT-OK ATE1Q0 OK \
	 AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
	 \\dATDT\\T TIMEOUT 40 CONNECT"
 load mtel

3g-pin:
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
	 \"\" AT OK-AT-OK ATE1Q0 OK \
	 AT+CPIN=0000 +ZEND \
	 AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
	 \\dATDT\\T TIMEOUT 40 CONNECT"
 load mtel
 set device /dev/ttyU0.2
 dial

3g:
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
	 \"\" AT OK-AT-OK ATE1Q0 OK \
	 AT+CGDCONT=1,\\\"IP\\\",\\\"inet-gprs.mtel.bg\\\" OK \
	 \\dATDT\\T TIMEOUT 40 CONNECT"
 load mtel
 set device /dev/ttyU0.2
 dial



pppoe_client:
 set device PPPoE:fxp0:aitnet_AC
 set speed sync
 set mtu 1492
 set mru 1492
 enable lqr
 set lqrperiod 5
 set timeout 0
 set authname testuser
 set authkey testpass
 set dial
 set login
 add default HISADDR

pptp_client:
 set speed sync
 enable lqr
 set lqrperiod 5
 set timeout 0
 set authname testuser
 set authkey testpass
 set dial
 set login
 add default HISADDR
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>