Annotation of elwix/config/etc/default/printcap, revision 1.1

1.1     ! misho       1: #      @(#)printcap    5.3 (Berkeley) 6/30/90
        !             2: # $FreeBSD: src/etc/printcap,v 1.14 2004/06/06 11:46:27 schweikh Exp $
        !             3: 
        !             4: #
        !             5: # This enables a simple local "raw" printer, hooked up to the first
        !             6: # parallel port.  No kind of filtering is done, so everything you pass
        !             7: # to the "lpr" command will be printed unmodified.
        !             8: #
        !             9: # Remember, for further print queues you're going to add, you have
        !            10: # to choose different spool directories (the "sd" capability below),
        !            11: # otherwise you will greatly confuse lpd.
        !            12: #
        !            13: # For some advanced printing, have a look at the "apsfilter" package.
        !            14: # It plugs into the lpd system, allowing you to print a variety of
        !            15: # different file types by converting everything to PostScript(tm)
        !            16: # format.  For more information about apsfilter visit
        !            17: #
        !            18: #           http://www.apsfilter.org/
        !            19: #
        !            20: # If you don't have a PostScript(tm) printer, don't panic, but do
        !            21: # also install the latest "ghostscript" package for best printer support.
        !            22: #
        !            23: # Do also refer to the "printing" section of the handbook.
        !            24: #
        !            25: #      http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/printing.html
        !            26: #
        !            27: # A local copy can be found under
        !            28: #
        !            29: #      /usr/share/doc/handbook/handbook.{html,latin1}.
        !            30: #
        !            31: # Banner pages are now suppressed by default.  Remove the :sh: capability
        !            32: # to turn them back on.
        !            33: #
        !            34: #lp|local line printer:\
        !            35: #      :sh:\
        !            36: #      :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
        !            37: #
        !            38: # Sample remote printer.  The physical printer is on machine "lphost".
        !            39: # You can perform any kind of local filtering directly.  If you need
        !            40: # local filters (e.g. LF -> CR-LF conversion for HP printers), create
        !            41: # a filter script that sends the proper escape sequence to the printer
        !            42: # and then concatenates stdin to stdout.
        !            43: #
        !            44: #remote|sample remote printer:\
        !            45: #      :sh:\
        !            46: #      :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:\
        !            47: #      :if=/usr/local/libexec/if-script:
        !            48: #
        !            49: # Simple Russian printer with hardware CP866 character set, output filter
        !            50: # used for KOI8-R -> CP866 conversion
        !            51: #
        !            52: #lp|Russian local line printer:\
        !            53: #      :sh:of=/usr/libexec/lpr/ru/koi2alt:\
        !            54: #      :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>