--- elwix/config/etc/default/rc.cfg	2017/10/08 00:05:37	1.3.2.16
+++ elwix/config/etc/default/rc.cfg	2021/09/13 00:41:37	1.4.4.1
@@ -2,13 +2,14 @@
 #
 # U-boot cfg nand map load/save management script
 #
-# $Id: rc.cfg,v 1.3.2.16 2017/10/08 00:05:37 misho Exp $
+# $Id: rc.cfg,v 1.4.4.1 2021/09/13 00:41:37 misho Exp $
 
 CFG_NAND_LIST="/etc/cfg.map"
 CFG_NAND_MAP="/dev/ada0g"
 CFG_NAND_SIZE=524288
 
 ELWIX2="/dev/ufs/elwix2"
+ELWIX="/dev/ufs/elwix"
 
 UPGRADE_GPIO_PINS="1 2 3"
 
@@ -23,15 +24,15 @@ cd ${2:-/etc}
 
 case "$1" in
 	load)
-		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
-		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+		CFG_NAND_MAP=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("/dev/%s", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("%s", $2 * 512); }'`
 
 		imgupd -gs ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} | \
-		      gunzip 2>&- | cpio -iud 2>&- || die "ERROR:: config load"
+		      gunzip 2>&- | cpio -iud --insecure 2>&- || die "ERROR:: config load"
 		;;
 	save)
-		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
-		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+		CFG_NAND_MAP=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("/dev/%s", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("%s", $2 * 512); }'`
 
 		if [ ! -r ${CFG_NAND_LIST} ]; then
 			echo "# Auto generated manifest file" >${CFG_NAND_LIST}
@@ -46,15 +47,15 @@ case "$1" in
 			imgupd -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} || die "ERROR:: config save"
 		;;
 	erase)
-		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
-		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+		CFG_NAND_MAP=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("/dev/%s", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("%s", $2 * 512); }'`
 
 		imgupd -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} /dev/zero || die "ERROR:: config erase"
                 echo "Config NAND was erased!"
 		;;
 	restore)
-		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
-		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+		CFG_NAND_MAP=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("/dev/%s", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("%s", $2 * 512); }'`
 
 		ELWIX_REMOTE_HOST=`cat /etc/myelwix`
 		ping -c1 $(echo ${ELWIX_REMOTE_HOST} | cut -f3 -d '/' | cut -f2 -d '@') >/dev/null 2>&1
@@ -70,8 +71,8 @@ case "$1" in
 		echo "ELWIX restore process complete. Now rebooting system ..."
 		;;
 	backup)
-		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
-		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+		CFG_NAND_MAP=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("/dev/%s", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '(NR == 1) { disk = $4; } ($3 == disk"g") { printf("%s", $2 * 512); }'`
 
 		ELWIX_REMOTE_HOST="/tmp/${ELWIX_CFG_BACKUP_NAME}"
 
@@ -90,11 +91,20 @@ case "$1" in
 		;;
 	pkg_save)
 		echo "ELWIX syncing information about installed packages into storage"
-		cfexec tar -czvf /elwix/altroot/pkg/db/pkgz.tar.gz /var/db/pkg/* || die "ERROR:: package save"
-		if [ $? -eq 127 ]; then
-			tar -czvf /elwix/altroot/pkg/db/pkgz.tar.gz /var/db/pkg/* || die "ERROR:: package save"
+		if mount | grep "${CFDIR}" >/dev/null 2>&1; then
+			mount -uw ${CFDIR}
 		fi
-		echo "ELWIX sync process complete."
+		cfexec -L "Locked by rc.cfg for pkg_save"
+		tar -czvf /elwix/altroot/pkg/db/pkgz.tar.gz /var/db/pkg/*
+		if [ $? -ne 0 ]; then
+			echo "ERROR:: package save"
+		else
+			echo "ELWIX sync process complete."
+		fi
+		if mount | grep "${CFDIR}" >/dev/null 2>&1; then
+			mount -ur ${CFDIR}
+		fi
+		cfexec -U
 		;;
 	pkg_load)
 		echo "ELWIX loading information about installed packages from storage"
@@ -103,7 +113,7 @@ case "$1" in
 		;;
 	pkg2cf)
 		echo "ELWIX setup new pkg location on CF at $PKGCF"
-		if ! mount | grep "${CFDIR}"; then
+		if ! mount | grep "${CFDIR}" >/dev/null 2>&1; then
 			echo "Skip pkg2cf setup, because CF partition isn't mounted ..."
 			exit 1
 		fi
@@ -112,42 +122,58 @@ case "$1" in
 			mkdir -p ${PKG2CF}/db
 			mkdir -p ${PKG2CF}/local
 
+			cfexec -L "Locked by rc.cfg for pkg2cf"
 			if [ ! -L /elwix/altroot/pkg/db ]; then 
 				cp -r /elwix/altroot/pkg/db/* ${PKG2CF}/db >/dev/null 2>&1
-				cfexec rm -rf /elwix/altroot/pkg/db
-				if [ $? -eq 127 ]; then
-					rm -rf /elwix/altroot/pkg/db
-				fi
-				cfexec ln -s ${PKG2CF}/db /elwix/altroot/pkg/db
-				if [ $? -eq 127 ]; then
-					ln -s ${PKG2CF}/db /elwix/altroot/pkg/db
-				fi
+				rm -rf /elwix/altroot/pkg/db
+				ln -s ${PKG2CF}/db /elwix/altroot/pkg/db
 			fi
 			if [ ! -L /elwix/local ]; then
 				cp -r /elwix/local/* ${PKG2CF}/local >/dev/null 2>&1
-				cfexec rm -rf /elwix/local
-				if [ $? -eq 127 ]; then
-					rm -rf /elwix/local
-				fi
-				cfexec ln -s ${PKG2CF}/local /elwix/local
-				if [ $? -eq 127 ]; then
-					ln -s ${PKG2CF}/local /elwix/local
-				fi
+				rm -rf /elwix/local
+				ln -s ${PKG2CF}/local /elwix/local
 			fi
+			cfexec -U
 
 			mount -ur ${CFDIR}
 		fi
 		echo "ELWIX pkg2cf setup complete."
 		;;
 	boot2)
-		echo "ELWIX setup boot from second image"
+		echo "ELWIX setup system boot from second image"
 		if [ -c $ELWIX2 ]; then
+			if mount | grep "${ELWIX2} " >/dev/null 2>&1; then
+				die "You already booted from backup image! Skip changing image ..."
+			fi
+
+			IMGTYPE=$(cat ./platform | awk '{ printf("%s", $2); }')
+			case $IMGTYPE in
+				base)
+					if ! mount $ELWIX2 /mnt; then
+						die "Backup image seems like broken ..."
+					fi
+
+					awk -v elwix="$ELWIX" -v elwix2="$ELWIX2" '
+						($1 == elwix) { gsub("\/", "\/", elwix); sub(elwix, elwix2, $0); }
+						{ print $0; }
+					' /mnt/etc/fstab > /tmp/fstab.tmp
+					if [ $? -eq 0 ]; then
+						cp /tmp/fstab.tmp /mnt/etc/fstab
+						rm -f /tmp/fstab.tmp
+					fi
+
+					umount /mnt
+					echo "ELWIX prepare backup image for next boot!"
+					;;
+				*)
+					;;
+			esac
+
 			cfger -o /tmp/loader.conf.local.tmp -c "Edit by /etc/rc.cfg" \
 				-JSs currdev /boot/loader.conf.local "\"disk0f:\""
-			cfexec cp /tmp/loader.conf.local.tmp /boot/loader.conf.local
-			if [ $? -eq 127 ]; then
-				cp /tmp/loader.conf.local.tmp /boot/loader.conf.local
-			fi
+			cfexec -L "Locked by rc.cfg for boot2"
+			cp /tmp/loader.conf.local.tmp /boot/loader.conf.local
+			cfexec -U
 			rm -f /tmp/loader.conf.local.tmp
 		else
 			die "ERROR:: ELWIX has no second usable image!"
@@ -155,18 +181,25 @@ case "$1" in
 		echo "ELWIX boot2 setup complete."
 		;;
 	boot)
-		echo "ELWIX setup boot from main image"
-		cfger -o /tmp/loader.conf.local.tmp -c "Edit by /etc/rc.cfg" \
-			-JSs currdev /boot/loader.conf.local "\"disk0a:\""
-		cfexec cp /tmp/loader.conf.local.tmp /boot/loader.conf.local
-		if [ $? -eq 127 ]; then
-			cp /tmp/loader.conf.local.tmp /boot/loader.conf.local
+		echo "ELWIX setup system boot from main image"
+		if mount | grep "${ELWIX2} " >/dev/null 2>&1; then
+			mount ${ELWIX} /mnt
+
+			cfger -o /tmp/loader.conf.local.tmp -c "Edit by /etc/rc.cfg" \
+				-JSs currdev /mnt/boot/loader.conf.local "\"disk0a:\""
+			cp /tmp/loader.conf.local.tmp /mnt/boot/loader.conf.local
+			rm -f /tmp/loader.conf.local.tmp
+
+			umount /mnt
+		else
+			die "You already booted from main image! Skip changing image ..."
 		fi
-		rm -f /tmp/loader.conf.local.tmp
 		echo "ELWIX boot setup complete."
 		;;
 	*)
-		echo "Missing parameter - available options are (load | save | erase | backup | restore | upgrade | pkg_load | pkg_save | pkg2cf | boot2 | boot)"
+		echo "Missing parameter - available options are :"
+		echo "   load | save | erase | backup | restore | upgrade | "
+		echo "   pkg_load | pkg_save | pkg2cf | boot2 | boot"
 		;;
 esac