--- elwix/config/etc/default/rc.cfg	2017/02/13 16:52:47	1.3
+++ elwix/config/etc/default/rc.cfg	2017/10/08 01:41:44	1.3.2.18
@@ -2,61 +2,82 @@
 #
 # U-boot cfg nand map load/save management script
 #
-# $Id: rc.cfg,v 1.3 2017/02/13 16:52:47 misho Exp $
+# $Id: rc.cfg,v 1.3.2.18 2017/10/08 01:41:44 misho Exp $
 
 CFG_NAND_LIST="/etc/cfg.map"
 CFG_NAND_MAP="/dev/ada0g"
-CFG_NAND_SIZE=262144
+CFG_NAND_SIZE=524288
 
+ELWIX2="/dev/ufs/elwix2"
+ELWIX="/dev/ufs/elwix"
+
 UPGRADE_GPIO_PINS="1 2 3"
 
 ELWIX_CFG_BACKUP_NAME="elwix_cfg_$(hostname).bin"
 
+CFDIR="/elwix/cf"
+PKG2CF="${CFDIR}/pkg"
+
+die() { echo -n "EXIT: " >&2; echo "$@" >&2; exit 1; }
+
 cd ${2:-/etc}
 
 case "$1" in
 	load)
+		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+
 		imgupd -gs ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} | \
-		      gunzip 2>&- | cpio -iud 2>&- || exit 1
+		      gunzip 2>&- | cpio -iud 2>&- || die "ERROR:: config load"
 		;;
 	save)
-		if [ ! -r ${CFG_NAND_LIST} ];then
+		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+
+		if [ ! -r ${CFG_NAND_LIST} ]; then
 			echo "# Auto generated manifest file" >${CFG_NAND_LIST}
 			find . >>${CFG_NAND_LIST}
 			if [ $? -ne 0 -o ! -r ${CFG_NAND_LIST} ]; then
-				echo "Manifest cfg nand map - file '${CFG_NAND_LIST}' not found!"
-				exit 1
+				die "ERROR:: Manifest cfg nand map - file '${CFG_NAND_LIST}' not found!"
 			fi
 		fi
 
 		sed -nE -e 's/^ *([^ #]+) */\1/p' < ${CFG_NAND_LIST} | xargs find | \
 			cpio -o | gzip -9 | \
-			imgupd -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} || exit 1
+			imgupd -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} || die "ERROR:: config save"
 		;;
 	erase)
-		imgupd -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} /dev/zero || exit 1
+		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+
+		imgupd -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} /dev/zero || die "ERROR:: config erase"
                 echo "Config NAND was erased!"
 		;;
 	restore)
+		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+
 		ELWIX_REMOTE_HOST=`cat /etc/myelwix`
 		ping -c1 $(echo ${ELWIX_REMOTE_HOST} | cut -f3 -d '/' | cut -f2 -d '@') >/dev/null 2>&1
 		if [ $? -ne 0 ]; then
-			echo "ELWIX restore from host ${ELWIX_REMOTE_HOST} failed!!!"
-			exit 1
+			die "ERROR:: ELWIX restore from host ${ELWIX_REMOTE_HOST} failed!!!"
 		fi
 
 		echo "ELWIX starting restore process from ${ELWIX_REMOTE_HOST}"
 		fetch -q -o- --user-agent=ELWIX_Restore --allow-sslv2 \
 			--no-verify-peer --no-verify-hostname \
 			${ELWIX_REMOTE_HOST}/${ELWIX_CFG_BACKUP_NAME} | \
-			imgupd -R -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} || exit 1
+			imgupd -R -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} || die "ERROR:: config restore"
 		echo "ELWIX restore process complete. Now rebooting system ..."
 		;;
 	backup)
+		CFG_NAND_MAP=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $3); }'`
+		CFG_NAND_SIZE=`gpart show -p | awk '($3 ~ "d[0-9]g" && $4 == "\!0") { printf("%s\n", $2 * 512); }'`
+
 		ELWIX_REMOTE_HOST="/tmp/${ELWIX_CFG_BACKUP_NAME}"
 
 		echo "ELWIX starting backup process to ${ELWIX_REMOTE_HOST}"
-		imgupd -gs ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} ${ELWIX_REMOTE_HOST} || exit 1
+		imgupd -gs ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} ${ELWIX_REMOTE_HOST} || die "ERROR:: config backup"
 		echo "ELWIX backup process complete."
 		;;
 	upgrade)
@@ -68,8 +89,96 @@ case "$1" in
 		done
 		TFTPd -wR
 		;;
+	pkg_save)
+		echo "ELWIX syncing information about installed packages into storage"
+		cfexec tar -czvf /elwix/altroot/pkg/db/pkgz.tar.gz /var/db/pkg/* || die "ERROR:: package save"
+		if [ $? -eq 127 ]; then
+			tar -czvf /elwix/altroot/pkg/db/pkgz.tar.gz /var/db/pkg/* || die "ERROR:: package save"
+		fi
+		echo "ELWIX sync process complete."
+		;;
+	pkg_load)
+		echo "ELWIX loading information about installed packages from storage"
+		tar -xzvpf /elwix/altroot/pkg/db/pkgz.tar.gz -C / || die "ERROR:: package load"
+		echo "ELWIX load process complete."
+		;;
+	pkg2cf)
+		echo "ELWIX setup new pkg location on CF at $PKGCF"
+		if ! mount | grep "${CFDIR}" >/dev/null 2>&1; then
+			echo "Skip pkg2cf setup, because CF partition isn't mounted ..."
+			exit 1
+		fi
+		if [ ! -L /elwix/local -a ! -L /elwix/altroot/pkg/db ]; then
+			mount -uw ${CFDIR}
+			mkdir -p ${PKG2CF}/db
+			mkdir -p ${PKG2CF}/local
+
+			if [ ! -L /elwix/altroot/pkg/db ]; then 
+				cp -r /elwix/altroot/pkg/db/* ${PKG2CF}/db >/dev/null 2>&1
+				cfexec rm -rf /elwix/altroot/pkg/db
+				if [ $? -eq 127 ]; then
+					rm -rf /elwix/altroot/pkg/db
+				fi
+				cfexec ln -s ${PKG2CF}/db /elwix/altroot/pkg/db
+				if [ $? -eq 127 ]; then
+					ln -s ${PKG2CF}/db /elwix/altroot/pkg/db
+				fi
+			fi
+			if [ ! -L /elwix/local ]; then
+				cp -r /elwix/local/* ${PKG2CF}/local >/dev/null 2>&1
+				cfexec rm -rf /elwix/local
+				if [ $? -eq 127 ]; then
+					rm -rf /elwix/local
+				fi
+				cfexec ln -s ${PKG2CF}/local /elwix/local
+				if [ $? -eq 127 ]; then
+					ln -s ${PKG2CF}/local /elwix/local
+				fi
+			fi
+
+			mount -ur ${CFDIR}
+		fi
+		echo "ELWIX pkg2cf setup complete."
+		;;
+	boot2)
+		echo "ELWIX setup boot from second image"
+		if [ -c $ELWIX2 ]; then
+			if mount | grep "${ELWIX2} " >/dev/null 2>&1; then
+				die "You already booted from backup image! Skip changing image ..."
+			fi
+
+			cfger -o /tmp/loader.conf.local.tmp -c "Edit by /etc/rc.cfg" \
+				-JSs currdev /boot/loader.conf.local "\"disk0f:\""
+			cfexec cp /tmp/loader.conf.local.tmp /boot/loader.conf.local
+			if [ $? -eq 127 ]; then
+				cp /tmp/loader.conf.local.tmp /boot/loader.conf.local
+			fi
+			rm -f /tmp/loader.conf.local.tmp
+		else
+			die "ERROR:: ELWIX has no second usable image!"
+		fi
+		echo "ELWIX boot2 setup complete."
+		;;
+	boot)
+		echo "ELWIX setup boot from main image"
+		if mount | grep "${ELWIX2} " >/dev/null 2>&1; then
+			mount ${ELWIX} /mnt
+
+			cfger -o /tmp/loader.conf.local.tmp -c "Edit by /etc/rc.cfg" \
+				-JSs currdev /mnt/boot/loader.conf.local "\"disk0a:\""
+			cp /tmp/loader.conf.local.tmp /mnt/boot/loader.conf.local
+			rm -f /tmp/loader.conf.local.tmp
+
+			umount /mnt
+		else
+			die "You already booted from main image! Skip changing image ..."
+		fi
+		echo "ELWIX boot setup complete."
+		;;
 	*)
-		echo "Missing parameter - available options are (load | save | erase | backup | restore | upgrade)"
+		echo "Missing parameter - available options are :"
+		echo "   load | save | erase | backup | restore | upgrade | "
+		echo "   pkg_load | pkg_save | pkg2cf | boot2 | boot"
 		;;
 esac