[BACK]Return to snmpd.config CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

Diff for /elwix/config/etc/default/snmpd.config between versions 1.1 and 1.2

version 1.1, 2011/07/05 23:43:00 version 1.2, 2013/01/28 01:47:35
Line 1 Line 1
# $FreeBSD: src/etc/snmpd.config,v 1.10 2010/07/26 16:20:52 syrinx Exp $# $FreeBSD: src/etc/snmpd.config,v 1.14 2012/11/17 01:49:02 svnexp Exp $
 #  #
 # Example configuration file for bsnmpd(1).  # Example configuration file for bsnmpd(1).
 #  #
Line 12  system := 1 # FreeBSD Line 12  system := 1 # FreeBSD
 traphost := localhost  traphost := localhost
 trapport := 162  trapport := 162
   
   #
   # Set the SNMP engine ID.
   #
   # The snmpEngineID object required from the SNMPv3 Framework. If not explicitly set via
   # this configuration file, an ID is assigned based on the value of the
   # kern.hostid variable
   # engine := 0x80:0x10:0x08:0x10:0x80:0x25
   # snmpEngineID = $(engine)
   
 # Change this!  # Change this!
 read := "public"  read := "public"
 # Uncomment begemotSnmpdCommunityString.0.2 below that sets the community  # Uncomment begemotSnmpdCommunityString.0.2 below that sets the community
Line 20  write := "geheim" Line 29  write := "geheim"
 trap := "mytrap"  trap := "mytrap"
   
 #  #
   # Declarations for SNMP-USER-BASED-SM-MIB authentication and privacy options
   #
   
   NoAuthProtocol          := 1.3.6.1.6.3.10.1.1.1
   HMACMD5AuthProtocol     := 1.3.6.1.6.3.10.1.1.2
   HMACSHAAuthProtocol     := 1.3.6.1.6.3.10.1.1.3
   NoPrivProtocol          := 1.3.6.1.6.3.10.1.2.1
   DESPrivProtocol         := 1.3.6.1.6.3.10.1.2.2
   AesCfb128Protocol       := 1.3.6.1.6.3.10.1.2.4
   
   #
   # Enumerations from SNMP-FRAMEWORK-MIB
   #
   
   # Security models
   securityModelAny        := 0
   securityModelSNMPv1     := 1
   securityModelSNMPv2c    := 2
   securityModelUSM        := 3
   
   # Message Processing models
   MPmodelSNMPv1           := 0
   MPmodelSNMPv2c          := 1
   MPmodelSNMPv3           := 3
   
   # Security levels
   noAuthNoPriv := 1
   authNoPriv := 2
   authPriv := 3
   
   
   # SNMPv3 USM User definition
   #
   # The localized hex password for a user may be obtained by setting SNMPUSER, SNMPPASSWD,
   # SNMPAUTH and SNMPPRIV environment variables to the desired parameters and invoking
   # 'bsnmpget -v 3 -D -K -o verbose' against the running bsnmpd(1). For other
   # usages refer to the bsnmpget(1) manual page. The following lines define a user "bsnmp"
   # with a private password "bsnmptest", localized for the above engine ID.
   #
   #user1 := "bsnmp"
   #user1passwd := 0x22:0x98:0x1a:0x6e:0x39:0x93:0x16:0x5e:0x6a:0x21:0x1b:0xd8:0xa9:0x81:0x31:0x05:0x16:0x33:0x38:0x60
   
   #
 # Configuration  # Configuration
 #  #
 %snmpd  %snmpd
Line 61  sysObjectId  = 1.3.6.1.4.1.12325.1.1.2.1.$(system) Line 113  sysObjectId  = 1.3.6.1.4.1.12325.1.1.2.1.$(system)
 snmpEnableAuthenTraps = 2  snmpEnableAuthenTraps = 2
   
 #  #
   # SNMPv3 User-based security module - must be loaded for SNMPv3 USM
   #
   #begemotSnmpdModulePath."usm"   = "/usr/lib/snmp_usm.so"
   
   #
   # SNMPv3 USM User definition.
   #
   
   #%usm
   
   #
   # The following block creates a user with name "bsnmp" and sets privacy
   # and encryption options to SHA256 message digests and AES encryption
   # for this user.
   # 
   # usmUserStatus.$(engine).$(user1) = 5
   # usmUserAuthProtocol.$(engine).$(user1) = $(HMACSHAAuthProtocol)
   # usmUserAuthKeyChange.$(engine).$(user1) = $(user1passwd)
   # usmUserPrivProtocol.$(engine).$(user1) = $(AesCfb128Protocol)
   # usmUserPrivKeyChange.$(engine).$(user1) = $(user1passwd)
   # usmUserStatus.$(engine).$(user1) = 1
   #
   
   #
   # The following block creates a user with name "public" with no authentication
   # or encryption options.
   #
   # usmUserStatus.$(engine).$(read) = 5
   # usmUserAuthProtocol.$(engine).$(read) = $(NoAuthProtocol)
   # usmUserPrivProtocol.$(engine).$(read) = $(NoPrivProtocol)
   # usmUserStatus.$(engine).$(read) = 1
   #
   
   #
   # SNMPv3 View-based Access Control module
   #
   #begemotSnmpdModulePath."vacm"  = "/usr/lib/snmp_vacm.so"
   
   #
   # Definition of view-based access control entries.
   #
   #%vacm
   
   # Definition of a SNMPv1 group
   # vacmSecurityToGroupStatus.$(securityModelSNMPv1).$(read) = 4
   # vacmGroupName.$(securityModelSNMPv1).$(read) = $(read)
   
   # Definition of SNMPv2 group
   # vacmSecurityToGroupStatus.$(securityModelSNMPv2c).$(write) = 4
   # vacmGroupName.$(securityModelSNMPv2c).$(write) = $(write)
   
   # Definition of SNMPv3 group with users "bsnmp" and "public"
   # vacmSecurityToGroupStatus.$(securityModelUSM).$(user1) = 4
   # vacmGroupName.$(securityModelUSM).$(user1) = $(write)
   # vacmSecurityToGroupStatus.$(securityModelUSM).$(read) = 4
   # vacmGroupName.$(securityModelUSM).$(read) = $(write)
   
   # 
   # The OID of the .iso.org.dod.internet subtree
   #
   # internetoid := 1.3.6.1
   # internetoidlen := 4
   
   #
   # Definitions of two views
   #
   # vacmViewTreeFamilyStatus."internet".$(internetoidlen).$(internetoid) = 4
   # vacmViewTreeFamilyStatus."restricted".$(internetoidlen).$(internetoid) = 4
   
   #
   # Access control
   #
   
   #
   # Read-only access for SNMPv1 users
   #
   # vacmAccessStatus.$(read)."".$(securityModelSNMPv1).$(noAuthNoPriv) = 4
   # vacmAccessReadViewName.$(read)."".$(securityModelSNMPv1).$(noAuthNoPriv) = "internet"
   
   #
   # Read-write access for SNMPv2 users 
   #
   # vacmAccessStatus.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = 4
   # vacmAccessReadViewName.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = "internet"
   # vacmAccessWriteViewName.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = "internet"
   
   #
   # Read-write-notify access for SNMPv3 USM users with noAuthNoPriv
   #
   # vacmAccessStatus.$(write)."".3.$(noAuthNoPriv) = 4
   # vacmAccessReadViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"
   # vacmAccessWriteViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"
   # vacmAccessNotifyViewName.$(write)."".$(securityModelUSM).$(noAuthNoPriv) = "internet"
   
   #
   #Read-write-notify access to restricted for SNMPv3 USM users with authPriv
   #
   # vacmAccessStatus.$(write)."".3.$(authPriv) = 4
   # vacmAccessReadViewName.$(write)."".3.$(authPriv) = "restricted"
   # vacmAccessWriteViewName.$(write)."".3.$(authPriv) = "restricted"
   # vacmAccessNotifyViewName.$(write)."".3.$(authPriv) = "restricted"
   
   #
   # SNMPv3 Notification Targets
   #
   # begemotSnmpdModulePath."target"       = "/usr/lib/snmp_target.so"
   
   #%target
   # Send notifications to target tag "test"
   # tag           := "test"
   # snmpNotifyRowStatus.$(tag) = 4
   # snmpNotifyTag.$(tag) = $(tag)
   
   # tagremote             := "testremote"
   # snmpNotifyRowStatus.$(tagremote) = 4
   # snmpNotifyTag.$(tagremote) = $(tagremote)
   
   #
   # Specify the target parameters for the notifications - send with the credentials
   # of user "bsnmp"
   #
   # snmpTargetParamsRowStatus.$(tag) = 5
   # snmpTargetParamsMPModel.$(tag) = $(MPmodelSNMPv3)
   # snmpTargetParamsSecurityModel.$(tag) = $(securityModelUSM)
   # snmpTargetParamsSecurityName.$(tag) = $(user1)
   # snmpTargetParamsSecurityLevel.$(tag) = $(authPriv)
   # snmpTargetParamsRowStatus.$(tag) = 1
   
   #
   # Define the notifications' target address - port 162 on localhost
   #
   # snmpTargetAddrRowStatus.$(tag) = 5
   # snmpTargetAddrTAddress.$(tag) = 0x7f:0x0:0x0:0x1:0x0:0xa2
   # snmpTargetAddrTagList.$(tag) = "test notification"
   # snmpTargetAddrParams.$(tag) = $(tag)
   # snmpTargetAddrRowStatus.$(tag) = 1
   
   #
   # Define the notifications' target address - port 162 on 10.0.0.1
   #
   # snmpTargetAddrRowStatus.$(tagremote) = 5
   # snmpTargetAddrTAddress.$(tagremote) = 0x0a:0x00:0x00:0x1:0x0:0xa2
   # snmpTargetAddrTagList.$(tagremote) = $(tagremote)
   # snmpTargetAddrParams.$(tagremote) = $(tag)
   # snmpTargetAddrRowStatus.$(tagremote) = 1
   
   #
 # Load MIB-2 module  # Load MIB-2 module
 #  #
begemotSnmpdModulePath."mibII"  = "/usr/lib/snmp_mibII.so.6"begemotSnmpdModulePath."mibII"  = "/usr/lib/snmp_mibII.so"
   
 # Force a polling rate for the 64-bit interface counters in case  # Force a polling rate for the 64-bit interface counters in case
 # the automatic computation is wrong (which may be the case if an interface  # the automatic computation is wrong (which may be the case if an interface
Line 71  begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII. Line 270  begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.
 #%mibII  #%mibII
 #begemotIfForcePoll = 2000  #begemotIfForcePoll = 2000
   
#
 # Netgraph module  # Netgraph module
 #  #
#begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so.6"#begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so"
 #  #
 #%netgraph  #%netgraph
 #begemotNgControlNodeName = "snmpd"  #begemotNgControlNodeName = "snmpd"
Line 82  begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII. Line 281  begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.
 #  #
 # pf(4) module  # pf(4) module
 #  #
#begemotSnmpdModulePath."pf"    = "/usr/lib/snmp_pf.so.6"#begemotSnmpdModulePath."pf"    = "/usr/lib/snmp_pf.so"
   
 #  #
 # Host resources module  # Host resources module
 #  This requires the mibII module.  #  This requires the mibII module.
 #  #
#begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so.6"#begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so"
   
 #  #
 # Bridge module  # Bridge module
 #  This requires the mibII module.  #  This requires the mibII module.
 #  #
#begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so.6"#begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so"
   
 #  #
 # Wireless module  # Wireless module
 #  This requires the mibII module.  #  This requires the mibII module.
 #  #
#begemotSnmpdModulePath."wlan" = "/usr/lib/snmp_wlan.so.6"#begemotSnmpdModulePath."wlan" = "/usr/lib/snmp_wlan.so"
Removed from v.1.1  
changed lines
  Added in v.1.2

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>