--- elwix/config/etc/default/snmpd.config	2017/02/13 16:52:47	1.3
+++ elwix/config/etc/default/snmpd.config	2021/03/11 13:59:50	1.4
@@ -1,4 +1,4 @@
-# $FreeBSD: src/etc/snmpd.config,v 1.14 2012/11/17 01:49:02 svnexp Exp $
+# $FreeBSD: head/etc/snmpd.config 311601 2017-01-07 09:03:40Z ngie $
 #
 # Example configuration file for bsnmpd(1).
 #
@@ -112,12 +112,74 @@ sysObjectId 	= 1.3.6.1.4.1.12325.1.1.2.1.$(system)
 
 snmpEnableAuthenTraps = 2
 
+# Uncomment `begemotSnmpdModulePath.".." = ".."' entries below to enable
+# modules
+
 #
+# Control configuration for the modules in the module specific sections, e.g.
+# the "usm" module (begemotSnmpdModulePath."usm") can be controlled in the
+# %usm specific section. You must uncomment the section specific header in
+# order to use the enclosed variables, e.g. `usmUserStatus.$(engine).$(user1)`
+# can only be used if %usm is uncommented.
+#
+# Modules are loaded in the order listed, so they must be before any
+# dependent modules, e.g. "mibII" vs "bridge".
+#
+
+#
+# MIB-2 module
+#
+begemotSnmpdModulePath."mibII"	= "/usr/lib/snmp_mibII.so"
+
+#
+# Bridge module
+#  This requires the mibII module.
+#
+#begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so"
+
+#
+# Host resources module
+#  This requires the mibII module.
+#
+#begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so"
+
+#
+# LM75 Sensor module
+#
+#begemotSnmpdModulePath."lm75" = "/usr/lib/snmp_lm75.so"
+
+#
+# Netgraph module
+#
+#begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so"
+
+#
+# pf(4) module
+#
+#begemotSnmpdModulePath."pf"	= "/usr/lib/snmp_pf.so"
+
+#
+# SNMPv3 Notification Targets
+#
+# begemotSnmpdModulePath."target"	= "/usr/lib/snmp_target.so"
+
+#
 # SNMPv3 User-based security module - must be loaded for SNMPv3 USM
 #
 #begemotSnmpdModulePath."usm"	= "/usr/lib/snmp_usm.so"
 
 #
+# SNMPv3 View-based Access Control module
+#
+#begemotSnmpdModulePath."vacm"	= "/usr/lib/snmp_vacm.so"
+
+#
+# Wireless module
+#  This requires the mibII module.
+#
+#begemotSnmpdModulePath."wlan" = "/usr/lib/snmp_wlan.so"
+
+#
 # SNMPv3 USM User definition.
 #
 
@@ -127,7 +189,7 @@ snmpEnableAuthenTraps = 2
 # The following block creates a user with name "bsnmp" and sets privacy
 # and encryption options to SHA256 message digests and AES encryption
 # for this user.
-# 
+#
 # usmUserStatus.$(engine).$(user1) = 5
 # usmUserAuthProtocol.$(engine).$(user1) = $(HMACSHAAuthProtocol)
 # usmUserAuthKeyChange.$(engine).$(user1) = $(user1passwd)
@@ -147,11 +209,6 @@ snmpEnableAuthenTraps = 2
 #
 
 #
-# SNMPv3 View-based Access Control module
-#
-#begemotSnmpdModulePath."vacm"	= "/usr/lib/snmp_vacm.so"
-
-#
 # Definition of view-based access control entries.
 #
 #%vacm
@@ -170,7 +227,7 @@ snmpEnableAuthenTraps = 2
 # vacmSecurityToGroupStatus.$(securityModelUSM).$(read) = 4
 # vacmGroupName.$(securityModelUSM).$(read) = $(write)
 
-# 
+#
 # The OID of the .iso.org.dod.internet subtree
 #
 # internetoid := 1.3.6.1
@@ -193,7 +250,7 @@ snmpEnableAuthenTraps = 2
 # vacmAccessReadViewName.$(read)."".$(securityModelSNMPv1).$(noAuthNoPriv) = "internet"
 
 #
-# Read-write access for SNMPv2 users 
+# Read-write access for SNMPv2 users
 #
 # vacmAccessStatus.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = 4
 # vacmAccessReadViewName.$(write)."".$(securityModelSNMPv2c).$(noAuthNoPriv) = "internet"
@@ -210,16 +267,11 @@ snmpEnableAuthenTraps = 2
 #
 #Read-write-notify access to restricted for SNMPv3 USM users with authPriv
 #
-# vacmAccessStatus.$(write)."".3.$(authPriv) = 4
-# vacmAccessReadViewName.$(write)."".3.$(authPriv) = "restricted"
-# vacmAccessWriteViewName.$(write)."".3.$(authPriv) = "restricted"
-# vacmAccessNotifyViewName.$(write)."".3.$(authPriv) = "restricted"
+# vacmAccessStatus.$(write)."".$(securityModelUSM).$(authPriv) = 4
+# vacmAccessReadViewName.$(write)."".$(securityModelUSM).$(authPriv) = "restricted"
+# vacmAccessWriteViewName.$(write)."".$(securityModelUSM).$(authPriv) = "restricted"
+# vacmAccessNotifyViewName.$(write)."".$(securityModelUSM).$(authPriv) = "restricted"
 
-#
-# SNMPv3 Notification Targets
-#
-# begemotSnmpdModulePath."target"	= "/usr/lib/snmp_target.so"
-
 #%target
 # Send notifications to target tag "test"
 # tag		:= "test"
@@ -259,44 +311,12 @@ snmpEnableAuthenTraps = 2
 # snmpTargetAddrParams.$(tagremote) = $(tag)
 # snmpTargetAddrRowStatus.$(tagremote) = 1
 
-#
-# Load MIB-2 module
-#
-begemotSnmpdModulePath."mibII"	= "/usr/lib/snmp_mibII.so"
-
 # Force a polling rate for the 64-bit interface counters in case
 # the automatic computation is wrong (which may be the case if an interface
 # announces the wrong bit rate via its MIB).
 #%mibII
 #begemotIfForcePoll = 2000
 
-
-# Netgraph module
-#
-#begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so"
-#
 #%netgraph
 #begemotNgControlNodeName = "snmpd"
 
-#
-# pf(4) module
-#
-#begemotSnmpdModulePath."pf"	= "/usr/lib/snmp_pf.so"
-
-#
-# Host resources module
-#  This requires the mibII module.
-#
-#begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so"
-
-#
-# Bridge module
-#  This requires the mibII module.
-#
-#begemotSnmpdModulePath."bridge" = "/usr/lib/snmp_bridge.so"
-
-#
-# Wireless module
-#  This requires the mibII module.
-#
-#begemotSnmpdModulePath."wlan" = "/usr/lib/snmp_wlan.so"