Return to ttys CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

Annotation of elwix/config/etc/default/ttys, revision 1.4

1.1       misho       1: #
                      2: # $FreeBSD: src/etc/etc.i386/ttys,v 1.20 2010/01/27 11:54:42 ed Exp $
                      3: #      @(#)ttys        5.1 (Berkeley) 4/17/89
                      4: #
                      5: # This file specifies various information about terminals on the system.
                      6: # It is used by several different programs.  Common entries for the
                      7: # various columns include:
                      8: #
                      9: # name  The name of the terminal device.
                     10: #
                     11: # getty The program to start running on the terminal.  Typically a
                     12: #       getty program, as the name implies.  Other common entries
                     13: #       include none, when no getty is needed, and xdm, to start the
                     14: #       X Window System.
                     15: #
                     16: # type The initial terminal type for this port.  For hardwired
                     17: #      terminal lines, this will contain the type of terminal used.
                     18: #      For virtual consoles, the correct type is typically xterm.
1.3       misho      19: #      Other common values include dialup for incoming modem ports, and
                     20: #      unknown when the terminal type cannot be predetermined.
1.1       misho      21: #
                     22: # status Must be on or off.  If on, init will run the getty program on
                     23: #        the specified port.  If the word "secure" appears, this tty
                     24: #        allows root login.
                     25: #
                     26: # name getty                           type    status          comments
                     27: #
                     28: # If console is marked "insecure", then init will ask for the root password
                     29: # when going to single-user mode.
                     30: console        none                            unknown off secure
                     31: #
                     32: ttyv0  "/usr/libexec/getty Pc"         xterm   on  secure
                     33: # Virtual terminals
1.4     ! misho      34: ttyv1  "/usr/libexec/getty Pc"         xterm   on  secure
1.1       misho      35: ttyv2  "/usr/libexec/getty Pc"         xterm   off secure
                     36: ttyv3  "/usr/libexec/getty Pc"         xterm   off secure
                     37: ttyv4  "/usr/libexec/getty Pc"         xterm   off secure
                     38: ttyv5  "/usr/libexec/getty Pc"         xterm   off secure
                     39: ttyv6  "/usr/libexec/getty Pc"         xterm   off secure
                     40: ttyv7  "/usr/libexec/getty Pc"         xterm   off secure
                     41: ttyv8  "/usr/local/bin/xdm -nodaemon"  xterm   off
                     42: # Serial terminals
                     43: # The 'dialup' keyword identifies dialin lines to login, fingerd etc.
1.4     ! misho      44: #ttyU0 "/usr/libexec/getty std.38400"  xterm   on  secure
1.2       misho      45: ttyu0  "/usr/libexec/getty std.38400"  xterm   on  secure
1.1       misho      46: ttyu1  "/usr/libexec/getty std.9600"   dialup  off secure
                     47: ttyu2  "/usr/libexec/getty std.9600"   dialup  off secure
                     48: ttyu3  "/usr/libexec/getty std.9600"   dialup  off secure
                     49: # Dumb console
                     50: dcons  "/usr/libexec/getty std.9600"   vt100   off secure