Return to ttys CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / default

ELWIX 1.7

    1: #
    2: # $FreeBSD: src/etc/etc.i386/ttys,v 1.20 2010/01/27 11:54:42 ed Exp $
    3: #	@(#)ttys	5.1 (Berkeley) 4/17/89
    4: #
    5: # This file specifies various information about terminals on the system.
    6: # It is used by several different programs.  Common entries for the
    7: # various columns include:
    8: #
    9: # name  The name of the terminal device.
   10: #
   11: # getty The program to start running on the terminal.  Typically a
   12: #       getty program, as the name implies.  Other common entries
   13: #       include none, when no getty is needed, and xdm, to start the
   14: #       X Window System.
   15: #
   16: # type The initial terminal type for this port.  For hardwired
   17: #      terminal lines, this will contain the type of terminal used.
   18: #      For virtual consoles, the correct type is typically xterm.
   19: #      Other common values include dialup for incoming modem ports, and
   20: #      unknown when the terminal type cannot be predetermined.
   21: #
   22: # status Must be on or off.  If on, init will run the getty program on
   23: #        the specified port.  If the word "secure" appears, this tty
   24: #        allows root login.
   25: #
   26: # name	getty				type	status		comments
   27: #
   28: # If console is marked "insecure", then init will ask for the root password
   29: # when going to single-user mode.
   30: console	none				unknown	off secure
   31: #
   32: ttyv0	"/usr/libexec/getty Pc"		xterm	on  secure
   33: # Virtual terminals
   34: ttyv1	"/usr/libexec/getty Pc"		xterm	off secure
   35: ttyv2	"/usr/libexec/getty Pc"		xterm	off secure
   36: ttyv3	"/usr/libexec/getty Pc"		xterm	off secure
   37: ttyv4	"/usr/libexec/getty Pc"		xterm	off secure
   38: ttyv5	"/usr/libexec/getty Pc"		xterm	off secure
   39: ttyv6	"/usr/libexec/getty Pc"		xterm	off secure
   40: ttyv7	"/usr/libexec/getty Pc"		xterm	off secure
   41: ttyv8	"/usr/local/bin/xdm -nodaemon"	xterm	off
   42: # Serial terminals
   43: # The 'dialup' keyword identifies dialin lines to login, fingerd etc.
   44: #ttyU0	"/usr/libexec/getty std.9600"	xterm	on  secure
   45: ttyu0	"/usr/libexec/getty std.38400"	xterm	on  secure
   46: ttyu1	"/usr/libexec/getty std.9600"	dialup	off secure
   47: ttyu2	"/usr/libexec/getty std.9600"	dialup	off secure
   48: ttyu3	"/usr/libexec/getty std.9600"	dialup	off secure
   49: # Dumb console
   50: dcons	"/usr/libexec/getty std.9600"	vt100	off secure