[BACK]Return to dnsmasq.conf.example CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / uboot

Diff for /elwix/config/etc/uboot/dnsmasq.conf.example between versions 1.1 and 1.1.2.1

version 1.1, 2014/01/23 09:30:22 version 1.1.2.1, 2014/01/23 09:30:22
Line 0 Line 1
   # Configuration file for dnsmasq.
   #
   # Format is one option per line, legal options are the same
   # as the long options legal on the command line. See
   # "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
   
   # Listen on this specific port instead of the standard DNS port
   # (53). Setting this to zero completely disables DNS function,
   # leaving only DHCP and/or TFTP.
   #port=5353
   
   # The following two options make you a better netizen, since they
   # tell dnsmasq to filter out queries which the public DNS cannot
   # answer, and which load the servers (especially the root servers)
   # unnecessarily. If you have a dial-on-demand link they also stop
   # these requests from bringing up the link unnecessarily.
   
   # Never forward plain names (without a dot or domain part)
   #domain-needed
   # Never forward addresses in the non-routed address spaces.
   #bogus-priv
   
   
   # Uncomment this to filter useless windows-originated DNS requests
   # which can trigger dial-on-demand links needlessly.
   # Note that (amongst other things) this blocks all SRV requests,
   # so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk.
   # This option only affects forwarding, SRV records originating for
   # dnsmasq (via srv-host= lines) are not suppressed by it.
   #filterwin2k
   
   # Change this line if you want dns to get its upstream servers from
   # somewhere other that /etc/resolv.conf
   #resolv-file=
   
   # By  default,  dnsmasq  will  send queries to any of the upstream
   # servers it knows about and tries to favour servers to are  known
   # to  be  up.  Uncommenting this forces dnsmasq to try each query
   # with  each  server  strictly  in  the  order  they   appear   in
   # /etc/resolv.conf
   #strict-order
   
   # If you don't want dnsmasq to read /etc/resolv.conf or any other
   # file, getting its servers from this file instead (see below), then
   # uncomment this.
   #no-resolv
   
   # If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
   # files for changes and re-read them then uncomment this.
   #no-poll
   
   # Add other name servers here, with domain specs if they are for
   # non-public domains.
   #server=/localnet/192.168.0.1
   
   # Example of routing PTR queries to nameservers: this will send all
   # address->name queries for 192.168.3/24 to nameserver 10.1.2.3
   #server=/3.168.192.in-addr.arpa/10.1.2.3
   
   # Add local-only domains here, queries in these domains are answered
   # from /etc/hosts or DHCP only.
   #local=/localnet/
   
   # Add domains which you want to force to an IP address here.
   # The example below send any host in double-click.net to a local
   # web-server.
   #address=/double-click.net/127.0.0.1
   
   # --address (and --server) work with IPv6 addresses too.
   #address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83
   
   # Add the IPs of all queries to yahoo.com, google.com, and their
   # subdomains to the vpn and search ipsets:
   #ipset=/yahoo.com/google.com/vpn,search
   
   # You can control how dnsmasq talks to a server: this forces
   # queries to 10.1.2.3 to be routed via eth1
   # server=10.1.2.3@eth1
   
   # and this sets the source (ie local) address used to talk to
   # 10.1.2.3 to 192.168.1.1 port 55 (there must be a interface with that
   # IP on the machine, obviously).
   # server=10.1.2.3@192.168.1.1#55
   
   # If you want dnsmasq to change uid and gid to something other
   # than the default, edit the following lines.
   #user=
   #group=
   
   # If you want dnsmasq to listen for DHCP and DNS requests only on
   # specified interfaces (and the loopback) give the name of the
   # interface (eg eth0) here.
   # Repeat the line for more than one interface.
   #interface=
   # Or you can specify which interface _not_ to listen on
   #except-interface=
   # Or which to listen on by address (remember to include 127.0.0.1 if
   # you use this.)
   #listen-address=
   # If you want dnsmasq to provide only DNS service on an interface,
   # configure it as shown above, and then use the following line to
   # disable DHCP and TFTP on it.
   #no-dhcp-interface=
   
   # On systems which support it, dnsmasq binds the wildcard address,
   # even when it is listening on only some interfaces. It then discards
   # requests that it shouldn't reply to. This has the advantage of
   # working even when interfaces come and go and change address. If you
   # want dnsmasq to really bind only the interfaces it is listening on,
   # uncomment this option. About the only time you may need this is when
   # running another nameserver on the same machine.
   #bind-interfaces
   
   # If you don't want dnsmasq to read /etc/hosts, uncomment the
   # following line.
   #no-hosts
   # or if you want it to read another file, as well as /etc/hosts, use
   # this.
   #addn-hosts=/etc/banner_add_hosts
   
   # Set this (and domain: see below) if you want to have a domain
   # automatically added to simple names in a hosts-file.
   #expand-hosts
   
   # Set the domain for dnsmasq. this is optional, but if it is set, it
   # does the following things.
   # 1) Allows DHCP hosts to have fully qualified domain names, as long
   #     as the domain part matches this setting.
   # 2) Sets the "domain" DHCP option thereby potentially setting the
   #    domain of all systems configured by DHCP
   # 3) Provides the domain part for "expand-hosts"
   #domain=thekelleys.org.uk
   
   # Set a different domain for a particular subnet
   #domain=wireless.thekelleys.org.uk,192.168.2.0/24
   
   # Same idea, but range rather then subnet
   #domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200
   
   # Uncomment this to enable the integrated DHCP server, you need
   # to supply the range of addresses available for lease and optionally
   # a lease time. If you have more than one network, you will need to
   # repeat this for each network on which you want to supply DHCP
   # service.
   #dhcp-range=192.168.0.50,192.168.0.150,12h
   
   # This is an example of a DHCP range where the netmask is given. This
   # is needed for networks we reach the dnsmasq DHCP server via a relay
   # agent. If you don't know what a DHCP relay agent is, you probably
   # don't need to worry about this.
   #dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
   
   # This is an example of a DHCP range which sets a tag, so that
   # some DHCP options may be set only for this network.
   #dhcp-range=set:red,192.168.0.50,192.168.0.150
   
   # Use this DHCP range only when the tag "green" is set.
   #dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h
   
   # Specify a subnet which can't be used for dynamic address allocation,
   # is available for hosts with matching --dhcp-host lines. Note that
   # dhcp-host declarations will be ignored unless there is a dhcp-range
   # of some type for the subnet in question.
   # In this case the netmask is implied (it comes from the network
   # configuration on the machine running dnsmasq) it is possible to give
   # an explicit netmask instead.
   #dhcp-range=192.168.0.0,static
   
   # Enable DHCPv6. Note that the prefix-length does not need to be specified
   # and defaults to 64 if missing/
   #dhcp-range=1234::2, 1234::500, 64, 12h
   
   # Do Router Advertisements, BUT NOT DHCP for this subnet.
   #dhcp-range=1234::, ra-only 
   
   # Do Router Advertisements, BUT NOT DHCP for this subnet, also try and
   # add names to the DNS for the IPv6 address of SLAAC-configured dual-stack 
   # hosts. Use the DHCPv4 lease to derive the name, network segment and 
   # MAC address and assume that the host will also have an
   # IPv6 address calculated using the SLAAC alogrithm.
   #dhcp-range=1234::, ra-names
   
   # Do Router Advertisements, BUT NOT DHCP for this subnet.
   # Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.)
   #dhcp-range=1234::, ra-only, 48h
   
   # Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA
   # so that clients can use SLAAC addresses as well as DHCP ones.
   #dhcp-range=1234::2, 1234::500, slaac
   
   # Do Router Advertisements and stateless DHCP for this subnet. Clients will
   # not get addresses from DHCP, but they will get other configuration information.
   # They will use SLAAC for addresses.
   #dhcp-range=1234::, ra-stateless
   
   # Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses
   # from DHCPv4 leases.
   #dhcp-range=1234::, ra-stateless, ra-names
   
   # Do router advertisements for all subnets where we're doing DHCPv6
   # Unless overriden by ra-stateless, ra-names, et al, the router 
   # advertisements will have the M and O bits set, so that the clients
   # get addresses and configuration from DHCPv6, and the A bit reset, so the 
   # clients don't use SLAAC addresses.
   #enable-ra
   
   # Supply parameters for specified hosts using DHCP. There are lots
   # of valid alternatives, so we will give examples of each. Note that
   # IP addresses DO NOT have to be in the range given above, they just
   # need to be on the same network. The order of the parameters in these
   # do not matter, it's permissible to give name, address and MAC in any
   # order.
   
   # Always allocate the host with Ethernet address 11:22:33:44:55:66
   # The IP address 192.168.0.60
   #dhcp-host=11:22:33:44:55:66,192.168.0.60
   
   # Always set the name of the host with hardware address
   # 11:22:33:44:55:66 to be "fred"
   #dhcp-host=11:22:33:44:55:66,fred
   
   # Always give the host with Ethernet address 11:22:33:44:55:66
   # the name fred and IP address 192.168.0.60 and lease time 45 minutes
   #dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
   
   # Give a host with Ethernet address 11:22:33:44:55:66 or
   # 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume
   # that these two Ethernet interfaces will never be in use at the same
   # time, and give the IP address to the second, even if it is already
   # in use by the first. Useful for laptops with wired and wireless
   # addresses.
   #dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60
   
   # Give the machine which says its name is "bert" IP address
   # 192.168.0.70 and an infinite lease
   #dhcp-host=bert,192.168.0.70,infinite
   
   # Always give the host with client identifier 01:02:02:04
   # the IP address 192.168.0.60
   #dhcp-host=id:01:02:02:04,192.168.0.60
   
   # Always give the host with client identifier "marjorie"
   # the IP address 192.168.0.60
   #dhcp-host=id:marjorie,192.168.0.60
   
   # Enable the address given for "judge" in /etc/hosts
   # to be given to a machine presenting the name "judge" when
   # it asks for a DHCP lease.
   #dhcp-host=judge
   
   # Never offer DHCP service to a machine whose Ethernet
   # address is 11:22:33:44:55:66
   #dhcp-host=11:22:33:44:55:66,ignore
   
   # Ignore any client-id presented by the machine with Ethernet
   # address 11:22:33:44:55:66. This is useful to prevent a machine
   # being treated differently when running under different OS's or
   # between PXE boot and OS boot.
   #dhcp-host=11:22:33:44:55:66,id:*
   
   # Send extra options which are tagged as "red" to
   # the machine with Ethernet address 11:22:33:44:55:66
   #dhcp-host=11:22:33:44:55:66,set:red
   
   # Send extra options which are tagged as "red" to
   # any machine with Ethernet address starting 11:22:33:
   #dhcp-host=11:22:33:*:*:*,set:red
   
   # Give a fixed IPv6 address and name to client with 
   # DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2
   # Note the MAC addresses CANNOT be used to identify DHCPv6 clients.
   # Note also the they [] around the IPv6 address are obilgatory.
   #dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] 
   
   # Ignore any clients which are not specified in dhcp-host lines
   # or /etc/ethers. Equivalent to ISC "deny unknown-clients".
   # This relies on the special "known" tag which is set when
   # a host is matched.
   #dhcp-ignore=tag:!known
   
   # Send extra options which are tagged as "red" to any machine whose
   # DHCP vendorclass string includes the substring "Linux"
   #dhcp-vendorclass=set:red,Linux
   
   # Send extra options which are tagged as "red" to any machine one
   # of whose DHCP userclass strings includes the substring "accounts"
   #dhcp-userclass=set:red,accounts
   
   # Send extra options which are tagged as "red" to any machine whose
   # MAC address matches the pattern.
   #dhcp-mac=set:red,00:60:8C:*:*:*
   
   # If this line is uncommented, dnsmasq will read /etc/ethers and act
   # on the ethernet-address/IP pairs found there just as if they had
   # been given as --dhcp-host options. Useful if you keep
   # MAC-address/host mappings there for other purposes.
   #read-ethers
   
   # Send options to hosts which ask for a DHCP lease.
   # See RFC 2132 for details of available options.
   # Common options can be given to dnsmasq by name:
   # run "dnsmasq --help dhcp" to get a list.
   # Note that all the common settings, such as netmask and
   # broadcast address, DNS server and default route, are given
   # sane defaults by dnsmasq. You very likely will not need
   # any dhcp-options. If you use Windows clients and Samba, there
   # are some options which are recommended, they are detailed at the
   # end of this section.
   
   # Override the default route supplied by dnsmasq, which assumes the
   # router is the same machine as the one running dnsmasq.
   #dhcp-option=3,1.2.3.4
   
   # Do the same thing, but using the option name
   #dhcp-option=option:router,1.2.3.4
   
   # Override the default route supplied by dnsmasq and send no default
   # route at all. Note that this only works for the options sent by
   # default (1, 3, 6, 12, 28) the same line will send a zero-length option
   # for all other option numbers.
   #dhcp-option=3
   
   # Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
   #dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
   
   # Send DHCPv6 option. Note [] around IPv6 addresses.
   #dhcp-option=option6:dns-server,[1234::77],[1234::88]
   
   # Send DHCPv6 option for namservers as the machine running 
   # dnsmasq and another.
   #dhcp-option=option6:dns-server,[::],[1234::88]
   
   # Ask client to poll for option changes every six hours. (RFC4242)
   #dhcp-option=option6:information-refresh-time,6h
   
   # Set the NTP time server address to be the same machine as
   # is running dnsmasq
   #dhcp-option=42,0.0.0.0
   
   # Set the NIS domain name to "welly"
   #dhcp-option=40,welly
   
   # Set the default time-to-live to 50
   #dhcp-option=23,50
   
   # Set the "all subnets are local" flag
   #dhcp-option=27,1
   
   # Send the etherboot magic flag and then etherboot options (a string).
   #dhcp-option=128,e4:45:74:68:00:00
   #dhcp-option=129,NIC=eepro100
   
   # Specify an option which will only be sent to the "red" network
   # (see dhcp-range for the declaration of the "red" network)
   # Note that the tag: part must precede the option: part.
   #dhcp-option = tag:red, option:ntp-server, 192.168.1.1
   
   # The following DHCP options set up dnsmasq in the same way as is specified
   # for the ISC dhcpcd in
   # http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
   # adapted for a typical dnsmasq installation where the host running
   # dnsmasq is also the host running samba.
   # you may want to uncomment some or all of them if you use
   # Windows clients and Samba.
   #dhcp-option=19,0           # option ip-forwarding off
   #dhcp-option=44,0.0.0.0     # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
   #dhcp-option=45,0.0.0.0     # netbios datagram distribution server
   #dhcp-option=46,8           # netbios node type
   
   # Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave.
   #dhcp-option=252,"\n"
   
   # Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
   # probably doesn't support this......
   #dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com
   
   # Send RFC-3442 classless static routes (note the netmask encoding)
   #dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
   
   # Send vendor-class specific options encapsulated in DHCP option 43.
   # The meaning of the options is defined by the vendor-class so
   # options are sent only when the client supplied vendor class
   # matches the class given here. (A substring match is OK, so "MSFT"
   # matches "MSFT" and "MSFT 5.0"). This example sets the
   # mtftp address to 0.0.0.0 for PXEClients.
   #dhcp-option=vendor:PXEClient,1,0.0.0.0
   
   # Send microsoft-specific option to tell windows to release the DHCP lease
   # when it shuts down. Note the "i" flag, to tell dnsmasq to send the
   # value as a four-byte integer - that's what microsoft wants. See
   # http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true
   #dhcp-option=vendor:MSFT,2,1i
   
   # Send the Encapsulated-vendor-class ID needed by some configurations of
   # Etherboot to allow is to recognise the DHCP server.
   #dhcp-option=vendor:Etherboot,60,"Etherboot"
   
   # Send options to PXELinux. Note that we need to send the options even
   # though they don't appear in the parameter request list, so we need
   # to use dhcp-option-force here.
   # See http://syslinux.zytor.com/pxe.php#special for details.
   # Magic number - needed before anything else is recognised
   #dhcp-option-force=208,f1:00:74:7e
   # Configuration file name
   #dhcp-option-force=209,configs/common
   # Path prefix
   #dhcp-option-force=210,/tftpboot/pxelinux/files/
   # Reboot time. (Note 'i' to send 32-bit value)
   #dhcp-option-force=211,30i
   
   # Set the boot filename for netboot/PXE. You will only need
   # this is you want to boot machines over the network and you will need
   # a TFTP server; either dnsmasq's built in TFTP server or an
   # external one. (See below for how to enable the TFTP server.)
   #dhcp-boot=pxelinux.0
   
   # The same as above, but use custom tftp-server instead machine running dnsmasq
   #dhcp-boot=pxelinux,server.name,192.168.1.100
   
   # Boot for Etherboot gPXE. The idea is to send two different
   # filenames, the first loads gPXE, and the second tells gPXE what to
   # load. The dhcp-match sets the gpxe tag for requests from gPXE.
   #dhcp-match=set:gpxe,175 # gPXE sends a 175 option.
   #dhcp-boot=tag:!gpxe,undionly.kpxe
   #dhcp-boot=mybootimage
   
   # Encapsulated options for Etherboot gPXE. All the options are
   # encapsulated within option 175
   #dhcp-option=encap:175, 1, 5b         # priority code
   #dhcp-option=encap:175, 176, 1b       # no-proxydhcp
   #dhcp-option=encap:175, 177, string   # bus-id
   #dhcp-option=encap:175, 189, 1b       # BIOS drive code
   #dhcp-option=encap:175, 190, user     # iSCSI username
   #dhcp-option=encap:175, 191, pass     # iSCSI password
   
   # Test for the architecture of a netboot client. PXE clients are
   # supposed to send their architecture as option 93. (See RFC 4578)
   #dhcp-match=peecees, option:client-arch, 0 #x86-32
   #dhcp-match=itanics, option:client-arch, 2 #IA64
   #dhcp-match=hammers, option:client-arch, 6 #x86-64
   #dhcp-match=mactels, option:client-arch, 7 #EFI x86-64
   
   # Do real PXE, rather than just booting a single file, this is an
   # alternative to dhcp-boot.
   #pxe-prompt="What system shall I netboot?"
   # or with timeout before first available action is taken:
   #pxe-prompt="Press F8 for menu.", 60
   
   # Available boot services. for PXE.
   #pxe-service=x86PC, "Boot from local disk"
   
   # Loads <tftp-root>/pxelinux.0 from dnsmasq TFTP server.
   #pxe-service=x86PC, "Install Linux", pxelinux
   
   # Loads <tftp-root>/pxelinux.0 from TFTP server at 1.2.3.4.
   # Beware this fails on old PXE ROMS.
   #pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4
   
   # Use bootserver on network, found my multicast or broadcast.
   #pxe-service=x86PC, "Install windows from RIS server", 1
   
   # Use bootserver at a known IP address.
   #pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4
   
   # If you have multicast-FTP available,
   # information for that can be passed in a similar way using options 1
   # to 5. See page 19 of
   # http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf
   
   
   # Enable dnsmasq's built-in TFTP server
   #enable-tftp
   
   # Set the root directory for files available via FTP.
   #tftp-root=/var/ftpd
   
   # Make the TFTP server more secure: with this set, only files owned by
   # the user dnsmasq is running as will be send over the net.
   #tftp-secure
   
   # This option stops dnsmasq from negotiating a larger blocksize for TFTP
   # transfers. It will slow things down, but may rescue some broken TFTP
   # clients.
   #tftp-no-blocksize
   
   # Set the boot file name only when the "red" tag is set.
   #dhcp-boot=tag:red,pxelinux.red-net
   
   # An example of dhcp-boot with an external TFTP server: the name and IP
   # address of the server are given after the filename.
   # Can fail with old PXE ROMS. Overridden by --pxe-service.
   #dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
   
   # If there are multiple external tftp servers having a same name
   # (using /etc/hosts) then that name can be specified as the
   # tftp_servername (the third option to dhcp-boot) and in that
   # case dnsmasq resolves this name and returns the resultant IP
   # addresses in round robin fasion. This facility can be used to
   # load balance the tftp load among a set of servers.
   #dhcp-boot=/var/ftpd/pxelinux.0,boothost,tftp_server_name
   
   # Set the limit on DHCP leases, the default is 150
   #dhcp-lease-max=150
   
   # The DHCP server needs somewhere on disk to keep its lease database.
   # This defaults to a sane location, but if you want to change it, use
   # the line below.
   #dhcp-leasefile=/var/lib/misc/dnsmasq.leases
   
   # Set the DHCP server to authoritative mode. In this mode it will barge in
   # and take over the lease for any client which broadcasts on the network,
   # whether it has a record of the lease or not. This avoids long timeouts
   # when a machine wakes up on a new network. DO NOT enable this if there's
   # the slightest chance that you might end up accidentally configuring a DHCP
   # server for your campus/company accidentally. The ISC server uses
   # the same option, and this URL provides more information:
   # http://www.isc.org/files/auth.html
   #dhcp-authoritative
   
   # Run an executable when a DHCP lease is created or destroyed.
   # The arguments sent to the script are "add" or "del",
   # then the MAC address, the IP address and finally the hostname
   # if there is one.
   #dhcp-script=/bin/echo
   
   # Set the cachesize here.
   #cache-size=150
   
   # If you want to disable negative caching, uncomment this.
   #no-negcache
   
   # Normally responses which come from /etc/hosts and the DHCP lease
   # file have Time-To-Live set as zero, which conventionally means
   # do not cache further. If you are happy to trade lower load on the
   # server for potentially stale date, you can set a time-to-live (in
   # seconds) here.
   #local-ttl=
   
   # If you want dnsmasq to detect attempts by Verisign to send queries
   # to unregistered .com and .net hosts to its sitefinder service and
   # have dnsmasq instead return the correct NXDOMAIN response, uncomment
   # this line. You can add similar lines to do the same for other
   # registries which have implemented wildcard A records.
   #bogus-nxdomain=64.94.110.11
   
   # If you want to fix up DNS results from upstream servers, use the
   # alias option. This only works for IPv4.
   # This alias makes a result of 1.2.3.4 appear as 5.6.7.8
   #alias=1.2.3.4,5.6.7.8
   # and this maps 1.2.3.x to 5.6.7.x
   #alias=1.2.3.0,5.6.7.0,255.255.255.0
   # and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40
   #alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0
   
   # Change these lines if you want dnsmasq to serve MX records.
   
   # Return an MX record named "maildomain.com" with target
   # servermachine.com and preference 50
   #mx-host=maildomain.com,servermachine.com,50
   
   # Set the default target for MX records created using the localmx option.
   #mx-target=servermachine.com
   
   # Return an MX record pointing to the mx-target for all local
   # machines.
   #localmx
   
   # Return an MX record pointing to itself for all local machines.
   #selfmx
   
   # Change the following lines if you want dnsmasq to serve SRV
   # records.  These are useful if you want to serve ldap requests for
   # Active Directory and other windows-originated DNS requests.
   # See RFC 2782.
   # You may add multiple srv-host lines.
   # The fields are <name>,<target>,<port>,<priority>,<weight>
   # If the domain part if missing from the name (so that is just has the
   # service and protocol sections) then the domain given by the domain=
   # config option is used. (Note that expand-hosts does not need to be
   # set for this to work.)
   
   # A SRV record sending LDAP for the example.com domain to
   # ldapserver.example.com port 389
   #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
   
   # A SRV record sending LDAP for the example.com domain to
   # ldapserver.example.com port 389 (using domain=)
   #domain=example.com
   #srv-host=_ldap._tcp,ldapserver.example.com,389
   
   # Two SRV records for LDAP, each with different priorities
   #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
   #srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
   
   # A SRV record indicating that there is no LDAP server for the domain
   # example.com
   #srv-host=_ldap._tcp.example.com
   
   # The following line shows how to make dnsmasq serve an arbitrary PTR
   # record. This is useful for DNS-SD. (Note that the
   # domain-name expansion done for SRV records _does_not
   # occur for PTR records.)
   #ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services"
   
   # Change the following lines to enable dnsmasq to serve TXT records.
   # These are used for things like SPF and zeroconf. (Note that the
   # domain-name expansion done for SRV records _does_not
   # occur for TXT records.)
   
   #Example SPF.
   #txt-record=example.com,"v=spf1 a -all"
   
   #Example zeroconf
   #txt-record=_http._tcp.example.com,name=value,paper=A4
   
   # Provide an alias for a "local" DNS name. Note that this _only_ works
   # for targets which are names from DHCP or /etc/hosts. Give host
   # "bert" another name, bertrand
   #cname=bertand,bert
   
   # For debugging purposes, log each DNS query as it passes through
   # dnsmasq.
   #log-queries
   
   # Log lots of extra information about DHCP transactions.
   #log-dhcp
   
   # Include another lot of configuration options.
   #conf-file=/etc/dnsmasq.more.conf
   #conf-dir=/etc/dnsmasq.d
Removed from v.1.1  
changed lines
  Added in v.1.1.2.1

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>