Return to rc.cfg CVS log

Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / uboot

update configz and enable ntpdate

    1: #!/bin/sh
    2: #
    3: # U-boot cfg nand map load/save management script
    4: #
    5: # $Id: rc.cfg,v 1.3.2.2 2017/06/23 08:56:48 misho Exp $
    6: 
    7: CFG_NAND_LIST="/etc/cfg.map"
    8: CFG_NAND_MAP="/dev/map/cfg"
    9: CFG_NAND_SIZE=65536
   10: 
   11: UPGRADE_GPIO_PINS="8 6 7"
   12: 
   13: ELWIX_CFG_BACKUP_NAME="elwix_cfg_$(hostname).bin"
   14: 
   15: PKG2CF="/elwix/cf/pkg"
   16: 
   17: die() { echo -n "EXIT: " >&2; echo "$@" >&2; exit 1; }
   18: 
   19: cd ${2:-/etc}
   20: 
   21: case "$1" in
   22: 	load)
   23: 		imgupd -gs ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} | \
   24: 		      gunzip 2>&- | cpio -iud 2>&- || die "ERROR:: config load"
   25: 		;;
   26: 	save)
   27: 		if [ ! -r ${CFG_NAND_LIST} ]; then
   28: 			echo "# Auto generated manifest file" >${CFG_NAND_LIST}
   29: 			find . >>${CFG_NAND_LIST}
   30: 			if [ $? -ne 0 -o ! -r ${CFG_NAND_LIST} ]; then
   31: 				die "ERROR:: Manifest cfg nand map - file '${CFG_NAND_LIST}' not found!"
   32: 			fi
   33: 		fi
   34: 
   35: 		sed -nE -e 's/^ *([^ #]+) */\1/p' < ${CFG_NAND_LIST} | xargs find | \
   36: 			cpio -o | gzip -9 | \
   37: 			imgupd -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} || die "ERROR:: config save"
   38: 		;;
   39: 	erase)
   40: 		imgupd -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} /dev/zero || die "ERROR:: config erase"
   41:                 echo "Config NAND was erased!"
   42: 		;;
   43: 	restore)
   44: 		ELWIX_REMOTE_HOST=`cat /etc/myelwix`
   45: 		ping -c1 $(echo ${ELWIX_REMOTE_HOST} | cut -f3 -d '/' | cut -f2 -d '@') >/dev/null 2>&1
   46: 		if [ $? -ne 0 ]; then
   47: 			die "ERROR:: ELWIX restore from host ${ELWIX_REMOTE_HOST} failed!!!"
   48: 		fi
   49: 
   50: 		echo "ELWIX starting restore process from ${ELWIX_REMOTE_HOST}"
   51: 		fetch -q -o- --user-agent=ELWIX_Restore --allow-sslv2 \
   52: 			--no-verify-peer --no-verify-hostname \
   53: 			${ELWIX_REMOTE_HOST}/${ELWIX_CFG_BACKUP_NAME} | \
   54: 			imgupd -R -is ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} || die "ERROR:: config restore"
   55: 		echo "ELWIX restore process complete. Now rebooting system ..."
   56: 		;;
   57: 	backup)
   58: 		ELWIX_REMOTE_HOST="/tmp/${ELWIX_CFG_BACKUP_NAME}"
   59: 
   60: 		echo "ELWIX starting backup process to ${ELWIX_REMOTE_HOST}"
   61: 		imgupd -gs ${CFG_NAND_SIZE} -f ${CFG_NAND_MAP} ${ELWIX_REMOTE_HOST} || die "ERROR:: config backup"
   62: 		echo "ELWIX backup process complete."
   63: 		;;
   64: 	upgrade)
   65: 		echo "ELWIX switch to upgrade mode. Starting TFTPd ..."
   66: 		echo " You can upload now elwix_firmware.bin image to device with \"firmware\" name!!!"
   67: 		echo "  Example: put elwix_firmware.bin firmware"
   68: 		for i in ${UPGRADE_GPIO_PINS}; do
   69: 			gpioctl $i 1 >/dev/null 2>&1
   70: 		done
   71: 		TFTPd -wR
   72: 		;;
   73: 	pkg_save)
   74: 		echo "ELWIX syncing information about installed packages into storage"
   75: 		cfexec tar -czvf /elwix/altroot/pkg/db/pkgz.tar.gz /var/db/pkg/* || die "ERROR:: package save"
   76: 		echo "ELWIX sync process complete."
   77: 		;;
   78: 	pkg_load)
   79: 		echo "ELWIX loading information about installed packages from storage"
   80: 		tar -xzvpf /elwix/altroot/pkg/db/pkgz.tar.gz -C / || die "ERROR:: package load"
   81: 		echo "ELWIX load process complete."
   82: 		;;
   83: 	pkg2cf)
   84: 		echo "ELWIX setup new pkg location on CF at $PKGCF"
   85: 		if ! mount | grep "/elwix/cf"; then
   86: 			echo "Skip pkg2cf setup, because CF partition isn't mounted ..."
   87: 			exit 1
   88: 		fi
   89: 		if [ ! -L /elwix/local -a ! -L /elwix/altroot/pkg/db ]; then
   90: 			mkdir -p ${PKG2CF}/db
   91: 			mkdir -p ${PKG2CF}/local
   92: 			cp -r /elwix/altroot/pkg/db/* ${PKG2CF}/db
   93: 			cp -r /elwix/local/* ${PKG2CF}/local
   94: 			rm -rf /elwix/local /elwix/altroot/pkg/db
   95: 			ln -s ${PKG2CF}/db /elwix/altroot/pkg/db
   96: 			ln -s ${PKG2CF}/local /elwix/local
   97: 		fi
   98: 		echo "ELWIX pkg2cf setup complete."
   99: 		;;
  100: 	*)
  101: 		echo "Missing parameter - available options are (load | save | erase | backup | restore | upgrade | pkg_load | pkg_save | pkg2cf)"
  102: 		;;
  103: esac
  104: 
  105: cd -