![[BACK]](/icons/cvsweb/back.gif){kind=icon}
Return to rc.initial CVS log ![[TXT]](/icons/cvsweb/text.gif){kind=icon}
![[DIR]](/icons/cvsweb/dir.gif){kind=icon}
Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / uboot|
Return to rc.initial CVS log | Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / uboot |
1.1.2.1 misho 1: #!/bin/sh
2: #
3: # ELWIX Initial RC Menu script
4: #
1.1.2.3 ! misho 5: # $Id: rc.initial,v 1.1.2.2 2014/01/27 09:57:50 misho Exp $
1.1.2.1 misho 6: #
7:
8: trap : 2
9: trap : 3
10: trap : 18
11: #exec </dev/console >/dev/console 2>/dev/console
12: MAGIC_MENU="menu"
13:
14: menu()
15: {
16: echo
17: echo
18: echo "ELWIX - console setup"
19: echo "*********************"
20: echo "0) Logout"
21: echo "1) Interfaces: assign network ports"
22: echo "2) Reset root password"
23: echo "3) Reset webGUI password"
24: echo "4) Reset to factory defaults"
25: echo "5) Reboot system"
26: echo "6) Ping host"
27: echo "7) SSH to host"
28: echo "8) Go to shell"
1.1.2.2 misho 29: echo "9) Save configz to NAND"
1.1.2.1 misho 30: echo
31:
32: read -p "Enter number: " opcode
33:
34: case ${opcode} in
35: 0)
36: exit
37: ;;
38: 1)
39: IFACES=$(ifconfig -l)
40: echo
41: echo "Available interfaces: $IFACES"
42: read -p " +Which from them: " iface
43: if [ -z "$iface" ]; then
44: return 1
45: fi
46: read -p " +Name of interface $iface []: " name
47: read -p " +Setup management vlan 4093 on $iface? [no|yes]: " mgmt
48: read -p " +IPv4 address/mask of interface $iface [dhcp|x.x.x.x/x]: " ip4
49: read -p " +IPv6 address/mask of interface $iface [auto|x:x:x::x/x]: " ip6
50: if [ X"$mgmt" = X"yes" -o X"$mgmt" = X"y" ]; then
51: cfexec sh -c "echo $iface >/etc/mylan"
52: fi
53: ifconfig $iface description "$name" up
54: if [ -n "$ip4" ]; then
55: if [ X"$ip4" != X"dhcp" ]; then
56: ifconfig $iface inet alias $ip4
57: else
58: dhclient $iface
59: fi
60: fi
61: if [ -n "$ip6" ]; then
62: ifconfig $iface inet6 auto_linklocal -ifdisabled
63: if [ X"$ip6" != X"auto" ]; then
64: ifconfig $iface inet6 -accept_rtadv
65: ifconfig $iface inet6 alias $ip6
66: else
67: ifconfig $iface inet6 accept_rtadv
68: fi
69: fi
70: ;;
71: 2)
72: passwd root
73: ;;
74: 3)
75: echo
76: read -p "New system webGUI password: " pass
77: read -p "Confirm system webGUI password: " confirm
78: if [ X"$pass" = X"$confirm" ]; then
79: cfexec xmler -s /elwix/system/password /elwix/etc/config.xml \
80: $(md5 -qs "$pass")
81: else
82: echo "Error:: passwords are different ..."
83: fi
84: ;;
85: 4)
86: echo
87: echo "Restore factory defaults ..."
88: read -p " +Are you sure for restore and clear all changes? [no|yes]: " ans
89: if [ X"$ans" = X"yes" -o X"$ans" = X"y" ]; then
90: cfexec rm -rf /elwix/etc/rc.S /elwix/etc/rc.s /elwix/etc/rc.t
91: cfexec tar -xzpf /elwix/altroot/backup/.var.tgz -C /elwix/altroot
92: cfexec tar -xzpf /elwix/altroot/backup/.etc.tgz -C /elwix
93: fi
94: ;;
95: 5)
96: reboot
97: ;;
98: 6)
99: read -p " +Address: " host
100: read -p " +Number packets [4]: " cx
101: ping -n -c ${cx:-4} ${host:-localhost}
102: ;;
103: 7)
104: read -p " +Address: " host
105: read -p " +Port [22]: " port
106: read -p " +User [$USER]: " user
107: ssh -p ${port:-22} -l ${user:-$USER} ${host:-localhost}
108: ;;
109: 8)
110: exec $SHELL
111: ;;
1.1.2.2 misho 112: 9)
113: echo "Saving configz to NAND ... "
1.1.2.3 ! misho 114: /etc/rc.cfg save /etc
1.1.2.2 misho 115: ;;
1.1.2.1 misho 116: esac
117: }
118:
119: ### main()
120:
121: while : ; do
122: if [ -r /etc/disablemenu ]; then
123: echo
124: echo
125: echo "*** Console menu disabled. ***"
126: echo
127:
128: stty -echo
129: read tmp
130: stty echo
131: if [ X"${tmp}" = X"${MAGIC_MENU}" ]; then
132: echo
133: echo "> OK, temporary unhide menu ..."
134: echo
135:
136: menu
137: fi
138: else
139: menu
140: fi
141: done