[BACK]Return to ttys CVS log [TXT] [DIR] Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / uboot

Diff for /elwix/config/etc/uboot/ttys between versions 1.1 and 1.1.2.1

version 1.1, 2014/01/23 09:24:04 version 1.1.2.1, 2014/01/23 09:24:04
Line 0 Line 1
   #
   # $FreeBSD: src/etc/etc.i386/ttys,v 1.20 2010/01/27 11:54:42 ed Exp $
   #       @(#)ttys        5.1 (Berkeley) 4/17/89
   #
   # This file specifies various information about terminals on the system.
   # It is used by several different programs.  Common entries for the
   # various columns include:
   #
   # name  The name of the terminal device.
   #
   # getty The program to start running on the terminal.  Typically a
   #       getty program, as the name implies.  Other common entries
   #       include none, when no getty is needed, and xdm, to start the
   #       X Window System.
   #
   # type The initial terminal type for this port.  For hardwired
   #      terminal lines, this will contain the type of terminal used.
   #      For virtual consoles, the correct type is typically xterm.
   #      Other common values include dialup for incoming modem ports, and
   #      unknown when the terminal type cannot be predetermined.
   #
   # status Must be on or off.  If on, init will run the getty program on
   #        the specified port.  If the word "secure" appears, this tty
   #        allows root login.
   #
   # name  getty                           type    status          comments
   #
   # If console is marked "insecure", then init will ask for the root password
   # when going to single-user mode.
   console none                            unknown off secure
   #
   ttyv0   "/usr/libexec/getty Pc"         xterm   on  secure
   # Virtual terminals
   ttyv1   "/usr/libexec/getty Pc"         xterm   on  secure
   ttyv2   "/usr/libexec/getty Pc"         xterm   off secure
   ttyv3   "/usr/libexec/getty Pc"         xterm   off secure
   ttyv4   "/usr/libexec/getty Pc"         xterm   off secure
   ttyv5   "/usr/libexec/getty Pc"         xterm   off secure
   ttyv6   "/usr/libexec/getty Pc"         xterm   off secure
   ttyv7   "/usr/libexec/getty Pc"         xterm   off secure
   ttyv8   "/usr/local/bin/xdm -nodaemon"  xterm   off
   # Serial terminals
   # The 'dialup' keyword identifies dialin lines to login, fingerd etc.
   #ttyU0  "/usr/libexec/getty std.38400"  xterm   on  secure
   ttyu0   "/usr/libexec/getty std.9600"   xterm   on  secure
   ttyu1   "/usr/libexec/getty std.9600"   dialup  off secure
   ttyu2   "/usr/libexec/getty std.9600"   dialup  off secure
   ttyu3   "/usr/libexec/getty std.9600"   dialup  off secure
   # Dumb console
   dcons   "/usr/libexec/getty std.9600"   vt100   off secure
Removed from v.1.1  
changed lines
  Added in v.1.1.2.1

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>