--- elwix/config/etc/uboot/ttys	2014/01/23 09:24:04	1.1
+++ elwix/config/etc/uboot/ttys	2014/09/15 19:06:48	1.2
@@ -0,0 +1,50 @@
+#
+# $FreeBSD: src/etc/etc.i386/ttys,v 1.20 2010/01/27 11:54:42 ed Exp $
+#	@(#)ttys	5.1 (Berkeley) 4/17/89
+#
+# This file specifies various information about terminals on the system.
+# It is used by several different programs.  Common entries for the
+# various columns include:
+#
+# name  The name of the terminal device.
+#
+# getty The program to start running on the terminal.  Typically a
+#       getty program, as the name implies.  Other common entries
+#       include none, when no getty is needed, and xdm, to start the
+#       X Window System.
+#
+# type The initial terminal type for this port.  For hardwired
+#      terminal lines, this will contain the type of terminal used.
+#      For virtual consoles, the correct type is typically xterm.
+#      Other common values include dialup for incoming modem ports, and
+#      unknown when the terminal type cannot be predetermined.
+#
+# status Must be on or off.  If on, init will run the getty program on
+#        the specified port.  If the word "secure" appears, this tty
+#        allows root login.
+#
+# name	getty				type	status		comments
+#
+# If console is marked "insecure", then init will ask for the root password
+# when going to single-user mode.
+console	none				unknown	off secure
+#
+ttyv0	"/usr/libexec/getty Pc"		xterm	off secure
+# Virtual terminals
+ttyv1	"/usr/libexec/getty Pc"		xterm	off secure
+ttyv2	"/usr/libexec/getty Pc"		xterm	off secure
+ttyv3	"/usr/libexec/getty Pc"		xterm	off secure
+ttyv4	"/usr/libexec/getty Pc"		xterm	off secure
+ttyv5	"/usr/libexec/getty Pc"		xterm	off secure
+ttyv6	"/usr/libexec/getty Pc"		xterm	off secure
+ttyv7	"/usr/libexec/getty Pc"		xterm	off secure
+ttyv8	"/usr/local/bin/xdm -nodaemon"	xterm	off
+# Serial terminals
+# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
+#ttyU0	"/usr/libexec/getty std.38400"	xterm	on  secure
+ttyu0	"/usr/libexec/getty std.9600"	xterm	on  secure
+ttyu1	"/usr/libexec/getty std.9600"	dialup	off secure
+ttyu2	"/usr/libexec/getty std.9600"	dialup	off secure
+ttyu3	"/usr/libexec/getty std.9600"	dialup	off secure
+# Dumb console
+dcons	"/usr/libexec/getty std.9600"	vt100	off secure