Annotation of elwix/config/etc/uboot/ttys, revision 1.1.2.1
1.1.2.1 ! misho 1: #
! 2: # $FreeBSD: src/etc/etc.i386/ttys,v 1.20 2010/01/27 11:54:42 ed Exp $
! 3: # @(#)ttys 5.1 (Berkeley) 4/17/89
! 4: #
! 5: # This file specifies various information about terminals on the system.
! 6: # It is used by several different programs. Common entries for the
! 7: # various columns include:
! 8: #
! 9: # name The name of the terminal device.
! 10: #
! 11: # getty The program to start running on the terminal. Typically a
! 12: # getty program, as the name implies. Other common entries
! 13: # include none, when no getty is needed, and xdm, to start the
! 14: # X Window System.
! 15: #
! 16: # type The initial terminal type for this port. For hardwired
! 17: # terminal lines, this will contain the type of terminal used.
! 18: # For virtual consoles, the correct type is typically xterm.
! 19: # Other common values include dialup for incoming modem ports, and
! 20: # unknown when the terminal type cannot be predetermined.
! 21: #
! 22: # status Must be on or off. If on, init will run the getty program on
! 23: # the specified port. If the word "secure" appears, this tty
! 24: # allows root login.
! 25: #
! 26: # name getty type status comments
! 27: #
! 28: # If console is marked "insecure", then init will ask for the root password
! 29: # when going to single-user mode.
! 30: console none unknown off secure
! 31: #
! 32: ttyv0 "/usr/libexec/getty Pc" xterm on secure
! 33: # Virtual terminals
! 34: ttyv1 "/usr/libexec/getty Pc" xterm on secure
! 35: ttyv2 "/usr/libexec/getty Pc" xterm off secure
! 36: ttyv3 "/usr/libexec/getty Pc" xterm off secure
! 37: ttyv4 "/usr/libexec/getty Pc" xterm off secure
! 38: ttyv5 "/usr/libexec/getty Pc" xterm off secure
! 39: ttyv6 "/usr/libexec/getty Pc" xterm off secure
! 40: ttyv7 "/usr/libexec/getty Pc" xterm off secure
! 41: ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off
! 42: # Serial terminals
! 43: # The 'dialup' keyword identifies dialin lines to login, fingerd etc.
! 44: #ttyU0 "/usr/libexec/getty std.38400" xterm on secure
! 45: ttyu0 "/usr/libexec/getty std.9600" xterm on secure
! 46: ttyu1 "/usr/libexec/getty std.9600" dialup off secure
! 47: ttyu2 "/usr/libexec/getty std.9600" dialup off secure
! 48: ttyu3 "/usr/libexec/getty std.9600" dialup off secure
! 49: # Dumb console
! 50: dcons "/usr/libexec/getty std.9600" vt100 off secure
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>