Return to ttys CVS log | Up to [ELWIX - Embedded LightWeight unIX -] / elwix / config / etc / uboot |
1.2 ! misho 1: # ! 2: # $FreeBSD: src/etc/etc.i386/ttys,v 1.20 2010/01/27 11:54:42 ed Exp $ ! 3: # @(#)ttys 5.1 (Berkeley) 4/17/89 ! 4: # ! 5: # This file specifies various information about terminals on the system. ! 6: # It is used by several different programs. Common entries for the ! 7: # various columns include: ! 8: # ! 9: # name The name of the terminal device. ! 10: # ! 11: # getty The program to start running on the terminal. Typically a ! 12: # getty program, as the name implies. Other common entries ! 13: # include none, when no getty is needed, and xdm, to start the ! 14: # X Window System. ! 15: # ! 16: # type The initial terminal type for this port. For hardwired ! 17: # terminal lines, this will contain the type of terminal used. ! 18: # For virtual consoles, the correct type is typically xterm. ! 19: # Other common values include dialup for incoming modem ports, and ! 20: # unknown when the terminal type cannot be predetermined. ! 21: # ! 22: # status Must be on or off. If on, init will run the getty program on ! 23: # the specified port. If the word "secure" appears, this tty ! 24: # allows root login. ! 25: # ! 26: # name getty type status comments ! 27: # ! 28: # If console is marked "insecure", then init will ask for the root password ! 29: # when going to single-user mode. ! 30: console none unknown off secure ! 31: # ! 32: ttyv0 "/usr/libexec/getty Pc" xterm off secure ! 33: # Virtual terminals ! 34: ttyv1 "/usr/libexec/getty Pc" xterm off secure ! 35: ttyv2 "/usr/libexec/getty Pc" xterm off secure ! 36: ttyv3 "/usr/libexec/getty Pc" xterm off secure ! 37: ttyv4 "/usr/libexec/getty Pc" xterm off secure ! 38: ttyv5 "/usr/libexec/getty Pc" xterm off secure ! 39: ttyv6 "/usr/libexec/getty Pc" xterm off secure ! 40: ttyv7 "/usr/libexec/getty Pc" xterm off secure ! 41: ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off ! 42: # Serial terminals ! 43: # The 'dialup' keyword identifies dialin lines to login, fingerd etc. ! 44: #ttyU0 "/usr/libexec/getty std.38400" xterm on secure ! 45: ttyu0 "/usr/libexec/getty std.9600" xterm on secure ! 46: ttyu1 "/usr/libexec/getty std.9600" dialup off secure ! 47: ttyu2 "/usr/libexec/getty std.9600" dialup off secure ! 48: ttyu3 "/usr/libexec/getty std.9600" dialup off secure ! 49: # Dumb console ! 50: dcons "/usr/libexec/getty std.9600" vt100 off secure